1piranha_pulse_selinux(8) SELinux Policy piranha_pulse piranha_pulse_selinux(8)
2
6 piranha_pulse_selinux - Security Enhanced Linux Policy for the pi‐
7 ranha_pulse processes
8
10 Security-Enhanced Linux secures the piranha_pulse processes via flexi‐
11 ble mandatory access control.
12 The piranha_pulse processes execute with the piranha_pulse_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep piranha_pulse_t
20
24 The piranha_pulse_t SELinux type can be entered via the pi‐
25 ranha_pulse_exec_t file type.
26 The default entrypoint paths for the piranha_pulse_t domain are the
28 following:
29 /usr/sbin/pulse
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 piranha_pulse policy is very flexible allowing users to setup their pi‐
40 ranha_pulse processes in as secure a method as possible.
41 The following process types are defined for piranha_pulse:
43 piranha_pulse_t
45 Note: semanage permissive -a piranha_pulse_t can be used to make the
47 process type piranha_pulse_t permissive. SELinux does not deny access
48 to permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. pi‐
54 ranha_pulse policy is extremely flexible and has several booleans that
55 allow you to manipulate the policy and run piranha_pulse with the
56 tightest access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64
68 The SELinux process type piranha_pulse_t can manage files labeled with
69 the following file types. The paths listed are the default paths for
70 these file types. Note the processes UID still need to have DAC per‐
71 missions.
72 cluster_conf_t
74 /etc/cluster(/.*)?
76 cluster_var_lib_t
78 /var/lib/pcsd(/.*)?
80 /var/lib/cluster(/.*)?
81 /var/lib/openais(/.*)?
82 /var/lib/pengine(/.*)?
83 /var/lib/corosync(/.*)?
84 /usr/lib/heartbeat(/.*)?
85 /var/lib/heartbeat(/.*)?
86 /var/lib/pacemaker(/.*)?
87 cluster_var_run_t
89 /var/run/crm(/.*)?
91 /var/run/cman_.*
92 /var/run/rsctmp(/.*)?
93 /var/run/aisexec.*
94 /var/run/heartbeat(/.*)?
95 /var/run/pcsd-ruby.socket
96 /var/run/corosync-qnetd(/.*)?
97 /var/run/corosync-qdevice(/.*)?
98 /var/run/corosync.pid
99 /var/run/cpglockd.pid
100 /var/run/rgmanager.pid
101 /var/run/cluster/rgmanager.sk
102 krb5_host_rcache_t
104 /var/tmp/krb5_0.rcache2
106 /var/cache/krb5rcache(/.*)?
107 /var/tmp/nfs_0
108 /var/tmp/DNS_25
109 /var/tmp/host_0
110 /var/tmp/imap_0
111 /var/tmp/HTTP_23
112 /var/tmp/HTTP_48
113 /var/tmp/ldap_55
114 /var/tmp/ldap_487
115 /var/tmp/ldapmap1_0
116 piranha_pulse_var_run_t
118 /var/run/pulse.pid
120 piranha_tmpfs
122 root_t
125 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
127 /
128 /initrd
129 systemd_passwd_var_run_t
131 /var/run/systemd/ask-password(/.*)?
133 /var/run/systemd/ask-password-block(/.*)?
134
137 SELinux requires files to have an extended attribute to define the file
138 type.
139 You can see the context of a file using the -Z option to ls
141 Policy governs the access confined processes have to these files.
143 SELinux piranha_pulse policy is very flexible allowing users to setup
144 their piranha_pulse processes in as secure a method as possible.
145 STANDARD FILE CONTEXT
147 SELinux defines the file context types for the piranha_pulse, if you
149 wanted to store files with these types in a diffent paths, you need to
150 execute the semanage command to specify alternate labeling and then use
151 restorecon to put the labels on disk.
152 semanage fcontext -a -t piranha_pulse_var_run_t '/srv/mypi‐
154 ranha_pulse_content(/.*)?'
155 restorecon -R -v /srv/mypiranha_pulse_content
156 Note: SELinux often uses regular expressions to specify labels that
158 match multiple files.
159 The following file types are defined for piranha_pulse:
161 piranha_pulse_exec_t
165 - Set files with the piranha_pulse_exec_t type, if you want to transi‐
167 tion an executable to the piranha_pulse_t domain.
168 piranha_pulse_initrc_exec_t
172 - Set files with the piranha_pulse_initrc_exec_t type, if you want to
174 transition an executable to the piranha_pulse_initrc_t domain.
175 piranha_pulse_tmpfs_t
179 - Set files with the piranha_pulse_tmpfs_t type, if you want to store
181 piranha pulse files on a tmpfs file system.
182 piranha_pulse_var_run_t
186 - Set files with the piranha_pulse_var_run_t type, if you want to store
188 the piranha pulse files under the /run or /var/run directory.
189 Note: File context can be temporarily modified with the chcon command.
193 If you want to permanently change the file context you need to use the
194 semanage fcontext command. This will modify the SELinux labeling data‐
195 base. You will need to use restorecon to apply the labels.
196
199 semanage fcontext can also be used to manipulate default file context
200 mappings.
201 semanage permissive can also be used to manipulate whether or not a
203 process type is permissive.
204 semanage module can also be used to enable/disable/install/remove pol‐
206 icy modules.
207 semanage boolean can also be used to manipulate the booleans
209 system-config-selinux is a GUI tool available to customize SELinux pol‐
212 icy settings.
213
216 This manual page was auto-generated using sepolicy manpage .
217
220 selinux(8), piranha_pulse(8), semanage(8), restorecon(8), chcon(1), se‐
221 policy(8), setsebool(8)
222piranha_pulse 21-11-19 piranha_pulse_selinux(8)