1pkcs_slotd_selinux(8) SELinux Policy pkcs_slotd pkcs_slotd_selinux(8)
2
3
4
6 pkcs_slotd_selinux - Security Enhanced Linux Policy for the pkcs_slotd
7 processes
8
10 Security-Enhanced Linux secures the pkcs_slotd processes via flexible
11 mandatory access control.
12
13 The pkcs_slotd processes execute with the pkcs_slotd_t SELinux type.
14 You can check if you have these processes running by executing the ps
15 command with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep pkcs_slotd_t
20
21
22
24 The pkcs_slotd_t SELinux type can be entered via the pkcs_slotd_exec_t
25 file type.
26
27 The default entrypoint paths for the pkcs_slotd_t domain are the fol‐
28 lowing:
29
30 /usr/sbin/pkcsslotd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 pkcs_slotd policy is very flexible allowing users to setup their
40 pkcs_slotd processes in as secure a method as possible.
41
42 The following process types are defined for pkcs_slotd:
43
44 pkcs_slotd_t
45
46 Note: semanage permissive -a pkcs_slotd_t can be used to make the
47 process type pkcs_slotd_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
51
53 SELinux policy is customizable based on least access required.
54 pkcs_slotd policy is extremely flexible and has several booleans that
55 allow you to manipulate the policy and run pkcs_slotd with the tightest
56 access possible.
57
58
59
60 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62
63 setsebool -P fips_mode 1
64
65
66
67 If you want to allow httpd to use opencryptoki, you must turn on the
68 httpd_use_opencryptoki boolean. Disabled by default.
69
70 setsebool -P httpd_use_opencryptoki 1
71
72
73
74 If you want to allow system to run with NIS, you must turn on the
75 nis_enabled boolean. Disabled by default.
76
77 setsebool -P nis_enabled 1
78
79
80
82 The SELinux process type pkcs_slotd_t can manage files labeled with the
83 following file types. The paths listed are the default paths for these
84 file types. Note the processes UID still need to have DAC permissions.
85
86 cluster_conf_t
87
88 /etc/cluster(/.*)?
89
90 cluster_var_lib_t
91
92 /var/lib/pcsd(/.*)?
93 /var/lib/cluster(/.*)?
94 /var/lib/openais(/.*)?
95 /var/lib/pengine(/.*)?
96 /var/lib/corosync(/.*)?
97 /usr/lib/heartbeat(/.*)?
98 /var/lib/heartbeat(/.*)?
99 /var/lib/pacemaker(/.*)?
100
101 cluster_var_run_t
102
103 /var/run/crm(/.*)?
104 /var/run/cman_.*
105 /var/run/rsctmp(/.*)?
106 /var/run/aisexec.*
107 /var/run/heartbeat(/.*)?
108 /var/run/pcsd-ruby.socket
109 /var/run/corosync-qnetd(/.*)?
110 /var/run/corosync-qdevice(/.*)?
111 /var/run/corosync.pid
112 /var/run/cpglockd.pid
113 /var/run/rgmanager.pid
114 /var/run/cluster/rgmanager.sk
115
116 krb5_host_rcache_t
117
118 /var/tmp/krb5_0.rcache2
119 /var/cache/krb5rcache(/.*)?
120 /var/tmp/nfs_0
121 /var/tmp/DNS_25
122 /var/tmp/host_0
123 /var/tmp/imap_0
124 /var/tmp/HTTP_23
125 /var/tmp/HTTP_48
126 /var/tmp/ldap_55
127 /var/tmp/ldap_487
128 /var/tmp/ldapmap1_0
129
130 pkcs_slotd_lock_t
131
132 /var/lock/opencryptoki(/.*)?
133
134 pkcs_slotd_log_t
135
136 /var/log/opencryptoki(/.*)?
137
138 pkcs_slotd_tmp_t
139
140
141 pkcs_slotd_tmpfs_t
142
143 /dev/shm/var.lib.opencryptoki.*
144
145 pkcs_slotd_var_lib_t
146
147 /var/lib/opencryptoki(/.*)?
148
149 pkcs_slotd_var_run_t
150
151 /var/run/pkcsslotd.*
152
153 root_t
154
155 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
156 /
157 /initrd
158
159
161 SELinux requires files to have an extended attribute to define the file
162 type.
163
164 You can see the context of a file using the -Z option to ls
165
166 Policy governs the access confined processes have to these files.
167 SELinux pkcs_slotd policy is very flexible allowing users to setup
168 their pkcs_slotd processes in as secure a method as possible.
169
170 STANDARD FILE CONTEXT
171
172 SELinux defines the file context types for the pkcs_slotd, if you
173 wanted to store files with these types in a diffent paths, you need to
174 execute the semanage command to specify alternate labeling and then use
175 restorecon to put the labels on disk.
176
177 semanage fcontext -a -t pkcs_slotd_unit_file_t '/srv/mypkcs_slotd_con‐
178 tent(/.*)?'
179 restorecon -R -v /srv/mypkcs_slotd_content
180
181 Note: SELinux often uses regular expressions to specify labels that
182 match multiple files.
183
184 The following file types are defined for pkcs_slotd:
185
186
187
188 pkcs_slotd_exec_t
189
190 - Set files with the pkcs_slotd_exec_t type, if you want to transition
191 an executable to the pkcs_slotd_t domain.
192
193
194
195 pkcs_slotd_initrc_exec_t
196
197 - Set files with the pkcs_slotd_initrc_exec_t type, if you want to
198 transition an executable to the pkcs_slotd_initrc_t domain.
199
200
201
202 pkcs_slotd_lock_t
203
204 - Set files with the pkcs_slotd_lock_t type, if you want to treat the
205 files as pkcs slotd lock data, stored under the /var/lock directory
206
207
208
209 pkcs_slotd_log_t
210
211 - Set files with the pkcs_slotd_log_t type, if you want to treat the
212 data as pkcs slotd log data, usually stored under the /var/log direc‐
213 tory.
214
215
216
217 pkcs_slotd_tmp_t
218
219 - Set files with the pkcs_slotd_tmp_t type, if you want to store pkcs
220 slotd temporary files in the /tmp directories.
221
222
223
224 pkcs_slotd_tmpfs_t
225
226 - Set files with the pkcs_slotd_tmpfs_t type, if you want to store pkcs
227 slotd files on a tmpfs file system.
228
229
230
231 pkcs_slotd_unit_file_t
232
233 - Set files with the pkcs_slotd_unit_file_t type, if you want to treat
234 the files as pkcs slotd unit content.
235
236
237
238 pkcs_slotd_var_lib_t
239
240 - Set files with the pkcs_slotd_var_lib_t type, if you want to store
241 the pkcs slotd files under the /var/lib directory.
242
243
244
245 pkcs_slotd_var_run_t
246
247 - Set files with the pkcs_slotd_var_run_t type, if you want to store
248 the pkcs slotd files under the /run or /var/run directory.
249
250
251
252 Note: File context can be temporarily modified with the chcon command.
253 If you want to permanently change the file context you need to use the
254 semanage fcontext command. This will modify the SELinux labeling data‐
255 base. You will need to use restorecon to apply the labels.
256
257
259 semanage fcontext can also be used to manipulate default file context
260 mappings.
261
262 semanage permissive can also be used to manipulate whether or not a
263 process type is permissive.
264
265 semanage module can also be used to enable/disable/install/remove pol‐
266 icy modules.
267
268 semanage boolean can also be used to manipulate the booleans
269
270
271 system-config-selinux is a GUI tool available to customize SELinux pol‐
272 icy settings.
273
274
276 This manual page was auto-generated using sepolicy manpage .
277
278
280 selinux(8), pkcs_slotd(8), semanage(8), restorecon(8), chcon(1), sepol‐
281 icy(8), setsebool(8)
282
283
284
285pkcs_slotd 21-11-19 pkcs_slotd_selinux(8)