1semanage_selinux(8)         SELinux Policy semanage        semanage_selinux(8)
2
3
4

NAME

6       semanage_selinux - Security Enhanced Linux Policy for the semanage pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures the  semanage  processes  via  flexible
11       mandatory access control.
12
13       The  semanage  processes  execute with the semanage_t SELinux type. You
14       can check if you have these processes running by executing the ps  com‐
15       mand with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep semanage_t
20
21
22

ENTRYPOINTS

24       The semanage_t SELinux type can be entered via the semanage_exec_t file
25       type.
26
27       The default entrypoint paths for the semanage_t domain are the  follow‐
28       ing:
29
30       /usr/sbin/semanage,   /usr/sbin/semodule,   /usr/libexec/selinux/seman‐
31       age_migrate_store,  /usr/share/system-config-selinux/selinux_server.py,
32       /usr/share/system-config-selinux/system-config-selinux-dbus.py
33

PROCESS TYPES

35       SELinux defines process types (domains) for each process running on the
36       system
37
38       You can see the context of a process using the -Z option to ps
39
40       Policy governs the access confined processes have  to  files.   SELinux
41       semanage policy is very flexible allowing users to setup their semanage
42       processes in as secure a method as possible.
43
44       The following process types are defined for semanage:
45
46       semanage_t
47
48       Note: semanage permissive -a semanage_t can be used to make the process
49       type  semanage_t permissive. SELinux does not deny access to permissive
50       process types, but the AVC (SELinux denials) messages are still  gener‐
51       ated.
52
53

BOOLEANS

55       SELinux  policy is customizable based on least access required.  seman‐
56       age policy is extremely flexible and has several  booleans  that  allow
57       you  to manipulate the policy and run semanage with the tightest access
58       possible.
59
60
61
62       If you want to deny user domains applications to map a memory region as
63       both  executable  and  writable,  this  is dangerous and the executable
64       should be reported in bugzilla, you must turn on the deny_execmem bool‐
65       ean. Enabled by default.
66
67       setsebool -P deny_execmem 1
68
69
70
71       If  you  want  to control the ability to mmap a low area of the address
72       space, as configured by /proc/sys/vm/mmap_min_addr, you  must  turn  on
73       the mmap_low_allowed boolean. Disabled by default.
74
75       setsebool -P mmap_low_allowed 1
76
77
78
79       If  you want to disable kernel module loading, you must turn on the se‐
80       cure_mode_insmod boolean. Enabled by default.
81
82       setsebool -P secure_mode_insmod 1
83
84
85
86       If you want to allow unconfined executables to make their  heap  memory
87       executable.   Doing  this  is  a  really bad idea. Probably indicates a
88       badly coded executable, but could indicate an attack.  This  executable
89       should  be  reported  in bugzilla, you must turn on the selinuxuser_ex‐
90       echeap boolean. Disabled by default.
91
92       setsebool -P selinuxuser_execheap 1
93
94
95
96       If you want to allow unconfined executables to make  their  stack  exe‐
97       cutable.   This  should  never, ever be necessary. Probably indicates a
98       badly coded executable, but could indicate an attack.  This  executable
99       should  be reported in bugzilla, you must turn on the selinuxuser_exec‐
100       stack boolean. Enabled by default.
101
102       setsebool -P selinuxuser_execstack 1
103
104
105

MANAGED FILES

107       The SELinux process type semanage_t can manage files labeled  with  the
108       following file types.  The paths listed are the default paths for these
109       file types.  Note the processes UID still need to have DAC permissions.
110
111       file_type
112
113            all files on the system
114
115

FILE CONTEXTS

117       SELinux requires files to have an extended attribute to define the file
118       type.
119
120       You can see the context of a file using the -Z option to ls
121
122       Policy  governs  the  access  confined  processes  have to these files.
123       SELinux semanage policy is very flexible allowing users to setup  their
124       semanage processes in as secure a method as possible.
125
126       EQUIVALENCE DIRECTORIES
127
128
129       semanage  policy stores data with multiple different file context types
130       under the /var/lib/selinux directory.  If you would like to  store  the
131       data  in a different directory you can use the semanage command to cre‐
132       ate an equivalence mapping.  If you wanted to store this data under the
133       /srv directory you would execute the following command:
134
135       semanage fcontext -a -e /var/lib/selinux /srv/selinux
136       restorecon -R -v /srv/selinux
137
138       STANDARD FILE CONTEXT
139
140       SELinux  defines the file context types for the semanage, if you wanted
141       to store files with these types in a diffent paths, you need to execute
142       the  semanage  command  to  specify alternate labeling and then use re‐
143       storecon to put the labels on disk.
144
145       semanage fcontext  -a  -t  semanage_trans_lock_t  '/srv/mysemanage_con‐
146       tent(/.*)?'
147       restorecon -R -v /srv/mysemanage_content
148
149       Note:  SELinux  often  uses  regular expressions to specify labels that
150       match multiple files.
151
152       The following file types are defined for semanage:
153
154
155
156       semanage_exec_t
157
158       - Set files with the semanage_exec_t type, if you want to transition an
159       executable to the semanage_t domain.
160
161
162       Paths:
163            /usr/sbin/semanage,  /usr/sbin/semodule, /usr/libexec/selinux/sem‐
164            anage_migrate_store,                     /usr/share/system-config-
165            selinux/selinux_server.py,   /usr/share/system-config-selinux/sys‐
166            tem-config-selinux-dbus.py
167
168
169       semanage_read_lock_t
170
171       - Set files with the semanage_read_lock_t type, if you  want  to  treat
172       the files as semanage read lock data, stored under the /var/lock direc‐
173       tory
174
175
176       Paths:
177            /etc/selinux/([^/]*/)?modules/semanage.read.LOCK,
178            /var/lib/selinux/[^/]+/semanage.read.LOCK
179
180
181       semanage_store_t
182
183       -  Set  files  with the semanage_store_t type, if you want to treat the
184       files as semanage store data.
185
186
187       Paths:
188            /etc/selinux/([^/]*/)?policy(/.*)?, /etc/selinux/(minimum|mls|tar‐
189            geted)/active(/.*)?,            /etc/selinux/([^/]*/)?modules/(ac‐
190            tive|tmp|previous)(/.*)?,                  /var/lib/selinux(/.*)?,
191            /etc/share/selinux/mls(/.*)?, /etc/share/selinux/targeted(/.*)?
192
193
194       semanage_tmp_t
195
196       - Set files with the semanage_tmp_t type, if you want to store semanage
197       temporary files in the /tmp directories.
198
199
200
201       semanage_trans_lock_t
202
203       - Set files with the semanage_trans_lock_t type, if you want  to  treat
204       the  files  as semanage trans lock data, stored under the /var/lock di‐
205       rectory
206
207
208       Paths:
209            /etc/selinux/([^/]*/)?modules/semanage.trans.LOCK,
210            /var/lib/selinux/[^/]+/semanage.trans.LOCK
211
212
213       Note:  File context can be temporarily modified with the chcon command.
214       If you want to permanently change the file context you need to use  the
215       semanage fcontext command.  This will modify the SELinux labeling data‐
216       base.  You will need to use restorecon to apply the labels.
217
218

COMMANDS

220       semanage fcontext can also be used to manipulate default  file  context
221       mappings.
222
223       semanage  permissive  can  also  be used to manipulate whether or not a
224       process type is permissive.
225
226       semanage module can also be used to enable/disable/install/remove  pol‐
227       icy modules.
228
229       semanage boolean can also be used to manipulate the booleans
230
231
232       system-config-selinux is a GUI tool available to customize SELinux pol‐
233       icy settings.
234
235

AUTHOR

237       This manual page was auto-generated using sepolicy manpage .
238
239

SEE ALSO

241       selinux(8), semanage(8), semanage(8), restorecon(8),  chcon(1),  sepol‐
242       icy(8), setsebool(8)
243
244
245
246semanage                           21-11-19                semanage_selinux(8)
Impressum