1stapserver_selinux(8) SELinux Policy stapserver stapserver_selinux(8)
2
6 stapserver_selinux - Security Enhanced Linux Policy for the stapserver
7 processes
8
10 Security-Enhanced Linux secures the stapserver processes via flexible
11 mandatory access control.
12 The stapserver processes execute with the stapserver_t SELinux type.
14 You can check if you have these processes running by executing the ps
15 command with the -Z qualifier.
16 For example:
18 ps -eZ | grep stapserver_t
20
24 The stapserver_t SELinux type can be entered via the stapserver_exec_t
25 file type.
26 The default entrypoint paths for the stapserver_t domain are the fol‐
28 lowing:
29 /usr/bin/stap-server
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 stapserver policy is very flexible allowing users to setup their
40 stapserver processes in as secure a method as possible.
41 The following process types are defined for stapserver:
43 stapserver_t
45 Note: semanage permissive -a stapserver_t can be used to make the
47 process type stapserver_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required.
54 stapserver policy is extremely flexible and has several booleans that
55 allow you to manipulate the policy and run stapserver with the tightest
56 access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64
68 The SELinux process type stapserver_t can manage files labeled with the
69 following file types. The paths listed are the default paths for these
70 file types. Note the processes UID still need to have DAC permissions.
71 cluster_conf_t
73 /etc/cluster(/.*)?
75 cluster_var_lib_t
77 /var/lib/pcsd(/.*)?
79 /var/lib/cluster(/.*)?
80 /var/lib/openais(/.*)?
81 /var/lib/pengine(/.*)?
82 /var/lib/corosync(/.*)?
83 /usr/lib/heartbeat(/.*)?
84 /var/lib/heartbeat(/.*)?
85 /var/lib/pacemaker(/.*)?
86 cluster_var_run_t
88 /var/run/crm(/.*)?
90 /var/run/cman_.*
91 /var/run/rsctmp(/.*)?
92 /var/run/aisexec.*
93 /var/run/heartbeat(/.*)?
94 /var/run/pcsd-ruby.socket
95 /var/run/corosync-qnetd(/.*)?
96 /var/run/corosync-qdevice(/.*)?
97 /var/run/corosync.pid
98 /var/run/cpglockd.pid
99 /var/run/rgmanager.pid
100 /var/run/cluster/rgmanager.sk
101 krb5_host_rcache_t
103 /var/tmp/krb5_0.rcache2
105 /var/cache/krb5rcache(/.*)?
106 /var/tmp/nfs_0
107 /var/tmp/DNS_25
108 /var/tmp/host_0
109 /var/tmp/imap_0
110 /var/tmp/HTTP_23
111 /var/tmp/HTTP_48
112 /var/tmp/ldap_55
113 /var/tmp/ldap_487
114 /var/tmp/ldapmap1_0
115 root_t
117 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
119 /
120 /initrd
121 stapserver_log_t
123 /var/log/stap-server(/.*)?
125 stapserver_tmp_t
127 stapserver_tmpfs_t
130 stapserver_var_lib_t
133 /var/lib/stap-server(/.*)?
135 stapserver_var_run_t
137 /var/run/stap-server(/.*)?
139
142 SELinux requires files to have an extended attribute to define the file
143 type.
144 You can see the context of a file using the -Z option to ls
146 Policy governs the access confined processes have to these files.
148 SELinux stapserver policy is very flexible allowing users to setup
149 their stapserver processes in as secure a method as possible.
150 STANDARD FILE CONTEXT
152 SELinux defines the file context types for the stapserver, if you
154 wanted to store files with these types in a diffent paths, you need to
155 execute the semanage command to specify alternate labeling and then use
156 restorecon to put the labels on disk.
157 semanage fcontext -a -t stapserver_tmpfs_t '/srv/mystapserver_con‐
159 tent(/.*)?'
160 restorecon -R -v /srv/mystapserver_content
161 Note: SELinux often uses regular expressions to specify labels that
163 match multiple files.
164 The following file types are defined for stapserver:
166 stapserver_exec_t
170 - Set files with the stapserver_exec_t type, if you want to transition
172 an executable to the stapserver_t domain.
173 stapserver_log_t
177 - Set files with the stapserver_log_t type, if you want to treat the
179 data as stapserver log data, usually stored under the /var/log direc‐
180 tory.
181 stapserver_tmp_t
185 - Set files with the stapserver_tmp_t type, if you want to store
187 stapserver temporary files in the /tmp directories.
188 stapserver_tmpfs_t
192 - Set files with the stapserver_tmpfs_t type, if you want to store
194 stapserver files on a tmpfs file system.
195 stapserver_var_lib_t
199 - Set files with the stapserver_var_lib_t type, if you want to store
201 the stapserver files under the /var/lib directory.
202 stapserver_var_run_t
206 - Set files with the stapserver_var_run_t type, if you want to store
208 the stapserver files under the /run or /var/run directory.
209 Note: File context can be temporarily modified with the chcon command.
213 If you want to permanently change the file context you need to use the
214 semanage fcontext command. This will modify the SELinux labeling data‐
215 base. You will need to use restorecon to apply the labels.
216
219 semanage fcontext can also be used to manipulate default file context
220 mappings.
221 semanage permissive can also be used to manipulate whether or not a
223 process type is permissive.
224 semanage module can also be used to enable/disable/install/remove pol‐
226 icy modules.
227 semanage boolean can also be used to manipulate the booleans
229 system-config-selinux is a GUI tool available to customize SELinux pol‐
232 icy settings.
233
236 This manual page was auto-generated using sepolicy manpage .
237
240 selinux(8), stapserver(8), semanage(8), restorecon(8), chcon(1), sepol‐
241 icy(8), setsebool(8)
242stapserver 21-11-19 stapserver_selinux(8)