1aerc-config(5) File Formats Manual aerc-config(5)
2
6 aerc-config - configuration file formats for aerc(1)
7
9 There are three aerc config files: aerc.conf, binds.conf, and ac‐
10 counts.conf. The last one must be kept secret, as it may include your
11 account credentials. We look for these files in your XDG config home
12 plus "aerc", which defaults to ~/.config/aerc.
13 Examples of these config files are typically included with your instal‐
15 lation of aerc and are usually installed in /usr/share/aerc.
16 Each file uses the ini format, and consists of sections with keys and
18 values. A line beginning with # is considered a comment and ignored, as
19 are empty lines. New sections begin with [section-name] on a single
20 line, and keys and values are separated with "=".
21
23 This file is used for configuring the general appearance and behavior
24 of aerc.
25 GENERAL OPTIONS
27 These options are configured in the [general] section of aerc.conf.
28 default-save-path
30 Used as a default path for save operations if no other path is
31 specified.
32 pgp-provider
34 If set to "gpg", aerc will use system gpg binary and keystore for
35 all crypto operations. Otherwise, the internal openpgp implemena‐
36 tion will be used.
37 Default: internal
39 unsafe-accounts-conf
41 By default, the file permissions of accounts.conf must be restric‐
42 tive and only allow reading by the file owner (0600). Set this op‐
43 tion to true to ignore this permission check. Use this with care as
44 it may expose your credentials.
45 Default: false
47 UI OPTIONS
49 These options are configured in the [ui] section of aerc.conf.
50 index-format
52 Describes the format for each row in a mailbox view. This field is
53 compatible with mutt's printf-like syntax.
54 Default: %D %-17.17n %s
56 ┌─────────────────┬────────────────────────────┐
58 │Format specifier │ Description │
59 ├─────────────────┼────────────────────────────┤
60 │ %% │ literal % │
61 ├─────────────────┼────────────────────────────┤
62 │ %a │ sender address │
63 ├─────────────────┼────────────────────────────┤
64 │ %A │ reply-to address, or │
65 │ │ sender address if none │
66 ├─────────────────┼────────────────────────────┤
67 │ %C │ message number │
68 ├─────────────────┼────────────────────────────┤
69 │ %d │ formatted message time‐ │
70 │ │ stamp │
71 ├─────────────────┼────────────────────────────┤
72 │ %D │ formatted message time‐ │
73 │ │ stamp converted to local │
74 │ │ timezone │
75 ├─────────────────┼────────────────────────────┤
76 │ %f │ sender name and address │
77 ├─────────────────┼────────────────────────────┤
78 │ %F │ author name, or recipient │
79 │ │ name if the message is │
80 │ │ from you. The address is │
81 │ │ shown if no name part. │
82 ├─────────────────┼────────────────────────────┤
83 │ %g │ message labels (for exam‐ │
84 │ │ ple notmuch tags) │
85 ├─────────────────┼────────────────────────────┤
86 │ %i │ message id │
87 ├─────────────────┼────────────────────────────┤
88 │ %n │ sender name, or sender ad‐ │
89 │ │ dress if none │
90 ├─────────────────┼────────────────────────────┤
91 │ %r │ comma-separated list of │
92 │ │ formatted recipient names │
93 │ │ and addresses │
94 ├─────────────────┼────────────────────────────┤
95 │ %R │ comma-separated list of │
96 │ │ formatted CC names and ad‐ │
97 │ │ dresses │
98 ├─────────────────┼────────────────────────────┤
99 │ %s │ subject │
100 ├─────────────────┼────────────────────────────┤
101 │ %t │ the (first) address the │
102 │ │ new email was sent to │
103 ├─────────────────┼────────────────────────────┤
104 │ %T │ the account name which re‐ │
105 │ │ ceived the email │
106 ├─────────────────┼────────────────────────────┤
107 │ %u │ sender mailbox name (e.g. │
108 │ │ "smith" in "smith@exam‐ │
109 │ │ ple.net") │
110 ├─────────────────┼────────────────────────────┤
111 │ %v │ sender first name (e.g. │
112 │ │ "Alex" in "Alex Smith │
113 │ │ <smith@example.net>") │
114 ├─────────────────┼────────────────────────────┤
115 │ %Z │ flags (O=old, N=new, r=an‐ │
116 │ │ swered, D=deleted, │
117 │ │ !=flagged, *=marked) │
118 └─────────────────┴────────────────────────────┘
119 timestamp-format
120 See time.Time#Format at https://godoc.org/time#Time.Format
121 Default: "2006-01-02 03:04 PM" (ISO 8601 + 12 hour time)
123 this-day-time-format
125 Index-only time format for messages that were received/sent today.
126 If this is not specified, timestamp-format is used instead.
127 Default: "03:04 PM" (12 hour time)
129 this-week-time-format
131 Index-only time format for messages that were received/sent within
132 the last 7 days. If this is not specified, timestamp-format is used
133 instead.
134 Default: "Monday 03:04 PM" (Week day + 12 hour time)
136 this-year-time-format
138 Index-only time format for messages that were received/sent this
139 year. If this is not specified, timestamp-format is used instead.
140 Default: "January 02" (Month + month day)
142 sidebar-width
144 Width of the sidebar, including the border. Set to zero to disable
145 the sidebar.
146 Default: 20
148 empty-message
150 Message to display when viewing an empty folder.
151 Default: (no messages)
153 empty-dirlist
155 Message to display when no folders exists or are all filtered.
156 Default: (no folders)
158 mouse-enabled
160 Enable mouse events in the ui, e.g. clicking and scrolling with the
161 mousewheel
162 Default: false
164 new-message-bell
166 Ring the bell when a new message is received.
167 Default: true
169 pinned-tab-marker
171 Marker to show before a pinned tab's name.
172 Default: `
174 spinner
176 Animation shown while loading, split by spinner-delimiter (below)
177 Examples:
179 • spinner = "-_-,_-_"
180 • spinner = '. , .'
181 • spinner = ",|,/,-"
182 Default: "[..] , [..] , [..] , [..] , [..], [..] ,
185 [..] , [..] "
186 spinner-delimiter
188 Spinner delimiter to split string into an animation
189 Default: ","
191 sort
193 List of space-separated criteria to sort the messages by, see sort
194 command in aerc(1) for reference. Prefixing a criterion with "-r "
195 reverses that criterion.
196 Example: "from -r date"
198 Default: ""
200 dirlist-format
202 Describes the format string to use for the directory list
203 Default: %n %>r
205 ┌─────────────────┬───────────────────────────┐
207 │Format specifier │ Description │
208 ├─────────────────┼───────────────────────────┤
209 │ %% │ literal % │
210 ├─────────────────┼───────────────────────────┤
211 │ %n │ directory name │
212 ├─────────────────┼───────────────────────────┤
213 │ %N │ compacted directory name │
214 ├─────────────────┼───────────────────────────┤
215 │ %r │ recent/unseen/total mes‐ │
216 │ │ sage count │
217 ├─────────────────┼───────────────────────────┤
218 │ %>X │ make format specifier 'X' │
219 │ │ be right justified │
220 └─────────────────┴───────────────────────────┘
221 dirlist-delay
222 Delay after which the messages are actually listed when entering a
223 directory. This avoids loading messages when skipping over folders
224 and makes the UI more responsive. If you do not want that, set it
225 to 0s.
226 Default: 200ms
228 dirlist-tree
230 Display the directory list as a foldable tree that allows to col‐
231 lapse and expand the folders.
232 Default: false
234 next-message-on-delete
236 Moves to next message when the current message is deleted
237 Default: true
239 completion-popovers
241 Shows potential auto-completions for text inputs in popovers.
242 Default: true
244 completion-delay
246 How long to wait after the last input before auto-completion is
247 triggered.
248 Default: 250ms
250 border-char-vertical border-char-horizontal
252 Set stylable characters (via the 'border' element) for vertical and
253 horizontal borders.
254 Default: spaces
256 stylesets-dirs
258 The directories where the stylesets are stored. The config takes a
259 colon-separated list of dirs. If this is unset or if a styleset
260 cannot be found, the following paths will be used as a fallback in
261 that order:
262 ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
264 ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
265 /usr/local/share/aerc/stylesets
266 /usr/share/aerc/stylesets
267 Default: ""
269 styleset-name
271 The name of the styleset to be used to style the ui elements. The
272 stylesets are stored in the 'stylesets' directory in the config di‐
273 rectory.
274 Default: default
276 Have a look at aerc-stylesets(7) as to how a styleset looks like.
278 fuzzy-complete
280 When typing a command or option, the popover will now show not only
281 the items /starting/ with the string input by the user, but it will
282 also show instances of items /containing/ the string, starting at
283 any position and need not be consecutive characters in the command
284 or option.
285 threading-enabled
287 Enable a threaded viewing of messages, works with IMAP (when
288 there's server support) and NotMuch backends.
289 This option should only be set to true for specific accounts ac‐
291 cordingly. See Contextual UI Configuration below.
292 If this is not supported by the server, you can enable it on the
294 fly by issuing the :toggle-threads command. The threading will be
295 done client side instead of on the server.
296 Default: false
298 Contextual UI Configuration
300 The UI configuration can be specialized for accounts, specific mail di‐
301 rectories and message subjects. The specializations are added using
302 contextual config sections based on the context.
303 The contextual UI configuration is merged to the base UiConfig in the
305 following order: Base UIConfig > Account Context > Folder Context >
306 Subject Context.
307 [ui:account=<AccountName>]
309 Adds account specific configuration with the account name.
310 [ui:folder=<FolderName>]
312 Add folder specific configuration with the folder name.
313 [ui:folder~<Regex>]
315 Add folder specific configuration for folders whose names match the
316 regular expression.
317 [ui:subject~<Regex>]
319 Add specialized ui configuration for messages that match a given
320 regular expression.
321 Example:
323 [ui:account=Work]
324 sidebar-width=...
325 [ui:folder=Sent]
327 index-format=...
328 [ui:folder~Archive/d+/.*]
330 index-format=...
331 [ui:subject~^[PATCH]
333 index-format=...
334 STATUSLINE
336 These options are configured in the [statusline] section of aerc.conf.
337 render-format
339 Describes the format string for the statusline format.
340 For a minimal statusline that only shows the current account and
342 the connection information, use [%a] %c.
343 To completely mute the statusline (except for push notficiations),
345 use %m only.
346 Default: [%a] %S %>%T
348 ┌─────────────────┬────────────────────────────┐
350 │Format specifier │ Description │
351 ├─────────────────┼────────────────────────────┤
352 │ %% │ literal % │
353 ├─────────────────┼────────────────────────────┤
354 │ %a │ active account name │
355 ├─────────────────┼────────────────────────────┤
356 │ %d │ active directory name │
357 ├─────────────────┼────────────────────────────┤
358 │ %c │ connection state │
359 ├─────────────────┼────────────────────────────┤
360 │ %m │ mute statusline and show │
361 │ │ only push notifications │
362 ├─────────────────┼────────────────────────────┤
363 │ %S │ general status information │
364 │ │ (e.g. connection state, │
365 │ │ filter, search) │
366 ├─────────────────┼────────────────────────────┤
367 │ %T │ general on/off information │
368 │ │ (e.g. passthrough, thread‐ │
369 │ │ ing, sorting) │
370 ├─────────────────┼────────────────────────────┤
371 │ %> │ does not print anything │
372 │ │ but all format specifier │
373 │ │ that follow will be right │
374 │ │ justified. │
375 └─────────────────┴────────────────────────────┘
376 separator
377 Specifies the separator between grouped statusline elements (e.g.
378 for the %S and %T specifiers in render-format).
379 Default: " | "
381 display-mode
383 Defines the mode for displaying the status elements. Options: text,
384 icon
385 Default: text
387 VIEWER
389 These options are configured in the [viewer] section of aerc.conf.
390 pager
392 Specifies the pager to use when displaying emails. Note that some
393 filters may add ANSI escape sequences to add color to rendered
394 emails, so you may want to use a pager which supports ANSI.
395 Default: less -R
397 alternatives
399 If an email offers several versions (multipart), you can configure
400 which mimetype to prefer. For example, this can be used to prefer
401 plaintext over HTML emails.
402 Default: text/plain,text/html
404 header-layout
406 Defines the default headers to display when viewing a message. To
407 display multiple headers in the same row, separate them with a
408 pipe, e.g. "From|To". Rows will be hidden if none of their speci‐
409 fied headers are present in the message.
410 Default: From|To,Cc|Bcc,Date,Subject
412 show-headers
414 Default setting to determine whether to show full headers or only
415 parsed ones in message viewer.
416 Default: false
418 always-show-mime
420 Whether to always show the mimetype of an email, even when it is
421 just a single part.
422 Default: false
424 COMPOSE
426 These options are configured in the [compose] section of aerc.conf.
427 editor
429 Specifies the command to run the editor with. It will be shown in
430 an embedded terminal, though it may also launch a graphical window
431 if the environment supports it. Defaults to $EDITOR, or vi(1).
432 header-layout
434 Defines the default headers to display when composing a message. To
435 display multiple headers in the same row, separate them with a
436 pipe, e.g. "To|From".
437 Default: To|From,Subject
439 address-book-cmd
441 Specifies the command to be used to tab-complete email addresses.
442 Any occurrence of "%s" in the address-book-cmd will be replaced
443 with anything the user has typed after the last comma.
444 The command must output the completions to standard output, one
446 completion per line. Each line must be tab-delimited, with an email
447 address occurring as the first field. Only the email address field
448 is required. The second field, if present, will be treated as the
449 contact name. Additional fields are ignored.
450 Example:
452 khard email --remove-first-line --parsable '%s'
453 Default: none
455 reply-to-self
457 Allow to include your own address. Otherwise, if set to false, do
458 not mail yourself when replying (e.g., if replying to emails previ‐
459 ously sent by yourself, address your replies to the original To:
460 and Cc:).
461 Default: true
463 FILTERS
465 Filters allow you to pipe an email body through a shell command to ren‐
466 der certain emails differently, e.g. highlighting them with ANSI escape
467 codes. They are configured in the [filters] section of aerc.conf.
468 The first filter which matches the email's mimetype will be used, so
470 order them from most to least specific.
471 You can also match on non-mimetypes, by prefixing with the header to
473 match against (non-case-sensitive) and a comma, e.g. subject,text will
474 match a subject which contains "text". Use header,~regex to match
475 against a regex.
476 aerc ships with some default filters installed in the share directory
478 (usually /usr/share/aerc/filters). Note that these may have additional
479 dependencies that aerc does not have alone.
480 TRIGGERS
482 Triggers specify commands to execute when certain events occur.
483 They are configured in the [triggers] section of aerc.conf.
485 new-email
487 Executed when a new email arrives in the selected folder.
488 e.g. new-email=exec notify-send "New email from %n" "%s"
490 Default: ""
492 Format specifiers from index-format are expanded with respect to
494 the new message.
495 TEMPLATES
497 Templates are used to populate the body of an email. The compose, reply
498 and forward commands can be called with the -T flag with the name of
499 the template name.
500 aerc ships with some default templates installed in the share directory
502 (usually /usr/share/aerc/templates).
503 These options are configured in the [templates] section of aerc.conf.
505 template-dirs
507 The directory where the templates are stored. The config takes a
508 colon-separated list of dirs. If this is unset or if a template
509 cannot be found, the following paths will be used as a fallback in
510 that order:
511 ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
513 ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
514 /usr/local/share/aerc/templates
515 /usr/share/aerc/templates
516 Default: ""
518 new-message
520 The default template to be used for new messages.
521 Default: "new_message"
523 quoted-reply
525 The default template to be used for quoted replies.
526 Default: "quoted_reply"
528 forwards
530 The default template to be used for forward as body.
531 Default: "forward_as_body"
533
535 This file is used for configuring each mail account used for aerc. Each
536 section is the name of an account you want to configure, and the keys &
537 values in that section specify details of that account's configuration.
538 In addition to the options documented here, specific transports for in‐
539 coming and outgoing emails may have additional configuration parame‐
540 ters, documented on their respective man pages.
541 Note that many of these configuration options are written for you, such
543 as source and outgoing, when you run the account configuration wizard
544 (:new-account).
545 archive
547 Specifies a folder to use as the destination of the :archive com‐
548 mand.
549 Default: Archive
551 copy-to
553 Specifies a folder to copy sent mails to, usually "Sent".
554 Default: none
556 default
558 Specifies the default folder to open in the message list when aerc
559 configures this account.
560 Default: INBOX
562 folders
564 Specifies the comma separated list of folders to display in the
565 sidebar. Names prefixed with ~ are interpreted as regular expres‐
566 sions.
567 Default: all folders
569 folders-exclude
571 Specifies the comma separated list of folders to exclude from the
572 sidebar. Names prefixed with ~ are interpreted as regular expres‐
573 sions. Note that this overrides anything from folders.
574 Default: no folders
576 enable-folders-sort
578 If true, folders are sorted, first by specified folders (see fold‐
579 ers-sort), then alphabetically.
580 Default: true
582 folders-sort
584 Specifies a comma separated list of folders to be shown at the top
585 of the list in the provided order. Remaining folders will be sorted
586 alphabetically.
587 Default: none
589 from
591 The default value to use for the From header in new emails. This
592 should be an RFC 5322-compatible string, such as "Your Name
593 <you@example.org>".
594 Default: none
596 aliases
598 All aliases of the current account. These will be used to fill in
599 the From: field. Make sure that your email server accepts this
600 value, or for example use aerc-sendmail(5) in combination with
601 msmtp and --read-envelope-from.
602 Default: none
604 outgoing
606 Specifies the transport for sending outgoing emails on this ac‐
607 count. It should be a connection string, and the specific meaning
608 of each component varies depending on the protocol in use. See
609 each protocol's man page for more details:
610 • aerc-smtp(5)
612 outgoing-cred-cmd
615 Specifies an optional command that is run to get the outgoing ac‐
616 count's password. See each protocol's man page for more details.
617 Default: none
619 pgp-auto-sign
621 If true, all outgoing emails from this account will be signed (if a
622 signing key is available)
623 Default: false
625 pgp-key-id
627 Specify the key id to use when signing a message. Can be either
628 short or long key id. If unset, aerc will look up the key by email
629 pgp-opportunistic-encrypt
631 If true, any outgoing email from this account will be encrypted
632 when all recipients (including "cc" and "bcc" field) have a public
633 key available in the keyring
634 Default: false
636 postpone
638 Specifies the folder to save postponed messages to.
639 Default: Drafts
641 source
643 Specifies the source for reading incoming emails on this account.
644 This key is required for all accounts. It should be a connection
645 string, and the specific meaning of each component varies depending
646 on the protocol in use. See each protocol's man page for more de‐
647 tails:
648 • aerc-imap(5)
650 • aerc-maildir(5)
651 • aerc-notmuch(5)
652 Default: none
655 source-cred-cmd
657 Specifies an optional command that is run to get the source ac‐
658 count's password. See each protocol's man page for more details.
659 signature-file
661 Specifies the file to read in order to obtain the signature to be
662 added to emails sent from this account.
663 signature-cmd
665 Specifies the command to execute in sh in order to obtain the sig‐
666 nature to be added to emails sent from this account. If the command
667 fails then signature-file is used instead.
668
670 This file is used for configuring keybindings used in the aerc interac‐
671 tive client. You may configure different keybindings for different con‐
672 texts by writing them into different [sections] of the ini file. The
673 available contexts are:
674 [messages]
676 keybindings for the message list
677 [view]
679 keybindings for the message viewer
680 [view::passthrough]
682 keybindings for the viewer, when in key passthrough mode (toggled
683 with :toggle-key-passthrough)
684 [compose]
686 keybindings for the message composer
687 [compose::editor]
689 keybindings for the composer, when the editor is focused
690 [compose::review]
692 keybindings for the composer, when reviewing the email before it's
693 sent
694 [terminal]
696 keybindings for terminal tabs
697 You may also configure account specific key bindings for each context:
699 [context:account=<AccountName>]
701 keybindings for this context and account, where <AccountName>
702 matches the account name you provided in accounts.conf.
703 Example:
705 [messages:account=Mailbox]
706 c = :cf path:mailbox/** and<space>
707 [compose::editor:account=Mailbox2]
709 ...
710 You may also configure global keybindings by placing them at the begin‐
712 ning of the file, before specifying any context-specific sections. For
713 each key=value option specified, the key is the keystrokes pressed (in
714 order) to invoke this keybinding, and value specifies keystrokes that
715 aerc will simulate when the keybinding is invoked. Generally this is
716 used to execute commands, for example:
717 rq = :reply -q<Enter>
719 Pressing r, then q, will simulate typing in ":reply -q<Enter>", and ex‐
721 ecute :reply -q accordingly. It is also possible to invoke keybindings
722 recursively in a similar fashion. Additionally, the following special
723 options are available in each binding context:
724 $noinherit
726 If set to "true", global keybindings will not be effective in this
727 context.
728 Default: false
730 $ex
732 This can be set to a keystroke which will bring up the command in‐
733 put in this context.
734 Default: <semicolon>
736 In addition to letters, special keys may be specified in <angle brack‐
738 ets>. The following special keys are supported:
739 ┌──────────┬─────────────┐
741 │Name │ Description │
742 ├──────────┼─────────────┤
743 │space │ " " │
744 ├──────────┼─────────────┤
745 │semicolon │ ; │
746 ├──────────┼─────────────┤
747 │tab │ │
748 ├──────────┼─────────────┤
749 │enter │ │
750 ├──────────┼─────────────┤
751 │up │ │
752 ├──────────┼─────────────┤
753 │c-up │ Ctrl+Up │
754 ├──────────┼─────────────┤
755 │down │ │
756 ├──────────┼─────────────┤
757 │c-down │ Ctrl+Down │
758 ├──────────┼─────────────┤
759 │right │ │
760 ├──────────┼─────────────┤
761 │c-right │ Ctrl+Right │
762 ├──────────┼─────────────┤
763 │left │ │
764 ├──────────┼─────────────┤
765 │c-left │ Ctrl+Left │
766 ├──────────┼─────────────┤
767 │pgup │ │
768 ├──────────┼─────────────┤
769 │c-pgup │ Ctrl+PageUp │
770 ├──────────┼─────────────┤
771 │pgdn │ │
772 ├──────────┼─────────────┤
773 │c-pgdn │ Ctrl+PageUp │
774 ├──────────┼─────────────┤
775 │home │ │
776 ├──────────┼─────────────┤
777 │end │ │
778 ├──────────┼─────────────┤
779 │insert │ │
780 ├──────────┼─────────────┤
781 │delete │ │
782 ├──────────┼─────────────┤
783 │exit │ │
784 ├──────────┼─────────────┤
785 │cancel │ │
786 ├──────────┼─────────────┤
787 │print │ │
788 ├──────────┼─────────────┤
789 │pause │ │
790 ├──────────┼─────────────┤
791 │backtab │ │
792 ├──────────┼─────────────┤
793 │c-space │ Ctrl+Space │
794 ├──────────┼─────────────┤
795 │c-a │ Ctrl+a │
796 ├──────────┼─────────────┤
797 │c-b │ Ctrl+b │
798 ├──────────┼─────────────┤
799 │c-c │ Ctrl+c │
800 ├──────────┼─────────────┤
801 │c-d │ Ctrl+d │
802 ├──────────┼─────────────┤
803 │c-e │ Ctrl+e │
804 ├──────────┼─────────────┤
805 │c-f │ Ctrl+f │
806 ├──────────┼─────────────┤
807 │c-g │ Ctrl+g │
808 ├──────────┼─────────────┤
809 │c-h │ Ctrl+h │
810 ├──────────┼─────────────┤
811 │c-i │ Ctrl+i │
812 ├──────────┼─────────────┤
813 │c-j │ Ctrl+j │
814 ├──────────┼─────────────┤
815 │c-k │ Ctrl+k │
816 ├──────────┼─────────────┤
817 │c-l │ Ctrl+l │
818 ├──────────┼─────────────┤
819 │c-m │ Ctrl+m │
820 ├──────────┼─────────────┤
821 │c-n │ Ctrl+n │
822 ├──────────┼─────────────┤
823 │c-o │ Ctrl+o │
824 ├──────────┼─────────────┤
825 │c-p │ Ctrl+p │
826 ├──────────┼─────────────┤
827 │c-q │ Ctrl+q │
828 ├──────────┼─────────────┤
829 │c-r │ Ctrl+r │
830 ├──────────┼─────────────┤
831 │c-s │ Ctrl+s │
832 ├──────────┼─────────────┤
833 │c-t │ Ctrl+t │
834 ├──────────┼─────────────┤
835 │c-u │ Ctrl+u │
836 ├──────────┼─────────────┤
837 │c-v │ Ctrl+v │
838 ├──────────┼─────────────┤
839 │c-w │ Ctrl+w │
840 ├──────────┼─────────────┤
841 │c-x │ Ctrl+x │
842 ├──────────┼─────────────┤
843 │c-y │ Ctrl+y │
844 ├──────────┼─────────────┤
845 │c-z │ Ctrl+z │
846 ├──────────┼─────────────┤
847 │c-] │ Ctrl+] │
848 ├──────────┼─────────────┤
849 │c-[ │ Ctrl+[ │
850 ├──────────┼─────────────┤
851 │c-^ │ Ctrl+^ │
852 ├──────────┼─────────────┤
853 │c-_ │ Ctrl+_ │
854 └──────────┴─────────────┘
855
857 aerc(1) aerc-imap(5) aerc-smtp(5) aerc-maildir(5) aerc-sendmail(5)
858 aerc-notmuch(5) aerc-stylesets(7)
859
861 Originally created by Drew DeVault <sir@cmpwn.com> and maintained by
862 Robin Jarry <robin@jarry.cc> who is assisted by other open source con‐
863 tributors. For more information about aerc development, see
864 https://sr.ht/~rjarry/aerc/.
865 2022-06-18 aerc-config(5)