1apcupsd_selinux(8)          SELinux Policy apcupsd          apcupsd_selinux(8)
2
3
4

NAME

6       apcupsd_selinux  -  Security Enhanced Linux Policy for the apcupsd pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures  the  apcupsd  processes  via  flexible
11       mandatory access control.
12
13       The  apcupsd processes execute with the apcupsd_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep apcupsd_t
20
21
22

ENTRYPOINTS

24       The  apcupsd_t  SELinux type can be entered via the apcupsd_exec_t file
25       type.
26
27       The default entrypoint paths for the apcupsd_t domain are  the  follow‐
28       ing:
29
30       /sbin/apcupsd, /usr/sbin/apcupsd
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       apcupsd  policy  is very flexible allowing users to setup their apcupsd
40       processes in as secure a method as possible.
41
42       The following process types are defined for apcupsd:
43
44       apcupsd_t, apcupsd_cgi_script_t
45
46       Note: semanage permissive -a apcupsd_t can be used to make the  process
47       type  apcupsd_t  permissive. SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux policy is customizable based on least access required.  apcupsd
54       policy is extremely flexible and has several booleans that allow you to
55       manipulate  the  policy and run apcupsd with the tightest access possi‐
56       ble.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66

PORT TYPES

68       SELinux defines port types to represent TCP and UDP ports.
69
70       You  can  see  the  types associated with a port by using the following
71       command:
72
73       semanage port -l
74
75
76       Policy governs the access  confined  processes  have  to  these  ports.
77       SELinux  apcupsd  policy is very flexible allowing users to setup their
78       apcupsd processes in as secure a method as possible.
79
80       The following port types are defined for apcupsd:
81
82
83       apcupsd_port_t
84
85
86
87       Default Defined Ports:
88                 tcp 3551
89                 udp 3551
90

MANAGED FILES

92       The SELinux process type apcupsd_t can manage files  labeled  with  the
93       following file types.  The paths listed are the default paths for these
94       file types.  Note the processes UID still need to have DAC permissions.
95
96       apcupsd_lock_t
97
98            /var/lock/LCK..
99            /var/lock/subsys/apcupsd
100
101       apcupsd_log_t
102
103            /var/log/apcupsd.events.*
104            /var/log/apcupsd.status.*
105
106       apcupsd_power_t
107
108            /etc/apcupsd/powerfail
109
110       apcupsd_tmp_t
111
112
113       apcupsd_var_run_t
114
115            /var/run/apcupsd.pid
116
117       cluster_conf_t
118
119            /etc/cluster(/.*)?
120
121       cluster_var_lib_t
122
123            /var/lib/pcsd(/.*)?
124            /var/lib/cluster(/.*)?
125            /var/lib/openais(/.*)?
126            /var/lib/pengine(/.*)?
127            /var/lib/corosync(/.*)?
128            /usr/lib/heartbeat(/.*)?
129            /var/lib/heartbeat(/.*)?
130            /var/lib/pacemaker(/.*)?
131
132       cluster_var_run_t
133
134            /var/run/crm(/.*)?
135            /var/run/cman_.*
136            /var/run/rsctmp(/.*)?
137            /var/run/aisexec.*
138            /var/run/heartbeat(/.*)?
139            /var/run/pcsd-ruby.socket
140            /var/run/corosync-qnetd(/.*)?
141            /var/run/corosync-qdevice(/.*)?
142            /var/run/corosync.pid
143            /var/run/cpglockd.pid
144            /var/run/rgmanager.pid
145            /var/run/cluster/rgmanager.sk
146
147       initrc_var_run_t
148
149            /var/run/utmp
150            /var/run/random-seed
151            /var/run/runlevel.dir
152            /var/run/setmixer_flag
153
154       krb5_host_rcache_t
155
156            /var/tmp/krb5_0.rcache2
157            /var/cache/krb5rcache(/.*)?
158            /var/tmp/nfs_0
159            /var/tmp/DNS_25
160            /var/tmp/host_0
161            /var/tmp/imap_0
162            /var/tmp/HTTP_23
163            /var/tmp/HTTP_48
164            /var/tmp/ldap_55
165            /var/tmp/ldap_487
166            /var/tmp/ldapmap1_0
167
168       root_t
169
170            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
171            /
172            /initrd
173
174       systemd_passwd_var_run_t
175
176            /var/run/systemd/ask-password(/.*)?
177            /var/run/systemd/ask-password-block(/.*)?
178
179

FILE CONTEXTS

181       SELinux requires files to have an extended attribute to define the file
182       type.
183
184       You can see the context of a file using the -Z option to ls
185
186       Policy  governs  the  access  confined  processes  have to these files.
187       SELinux apcupsd policy is very flexible allowing users to  setup  their
188       apcupsd processes in as secure a method as possible.
189
190       STANDARD FILE CONTEXT
191
192       SELinux  defines  the file context types for the apcupsd, if you wanted
193       to store files with these types in a diffent paths, you need to execute
194       the  semanage  command  to  specify alternate labeling and then use re‐
195       storecon to put the labels on disk.
196
197       semanage fcontext -a -t  apcupsd_cgi_ra_content_t  '/srv/myapcupsd_con‐
198       tent(/.*)?'
199       restorecon -R -v /srv/myapcupsd_content
200
201       Note:  SELinux  often  uses  regular expressions to specify labels that
202       match multiple files.
203
204       The following file types are defined for apcupsd:
205
206
207
208       apcupsd_cgi_content_t
209
210       - Set files with the apcupsd_cgi_content_t type, if you want  to  treat
211       the files as apcupsd cgi content.
212
213
214
215       apcupsd_cgi_htaccess_t
216
217       -  Set files with the apcupsd_cgi_htaccess_t type, if you want to treat
218       the file as a apcupsd cgi access file.
219
220
221
222       apcupsd_cgi_ra_content_t
223
224       - Set files with the apcupsd_cgi_ra_content_t  type,  if  you  want  to
225       treat the files as apcupsd cgi read/append content.
226
227
228
229       apcupsd_cgi_rw_content_t
230
231       -  Set  files  with  the  apcupsd_cgi_rw_content_t type, if you want to
232       treat the files as apcupsd cgi read/write content.
233
234
235
236       apcupsd_cgi_script_exec_t
237
238       - Set files with the apcupsd_cgi_script_exec_t type,  if  you  want  to
239       transition an executable to the apcupsd_cgi_script_t domain.
240
241
242       Paths:
243            /var/www/cgi-bin/apcgui(/.*)?,      /var/www/apcupsd/multimon.cgi,
244            /var/www/apcupsd/upsimage.cgi,      /var/www/apcupsd/upsstats.cgi,
245            /var/www/apcupsd/upsfstats.cgi
246
247
248       apcupsd_exec_t
249
250       -  Set files with the apcupsd_exec_t type, if you want to transition an
251       executable to the apcupsd_t domain.
252
253
254       Paths:
255            /sbin/apcupsd, /usr/sbin/apcupsd
256
257
258       apcupsd_initrc_exec_t
259
260       - Set files with the apcupsd_initrc_exec_t type, if you want to transi‐
261       tion an executable to the apcupsd_initrc_t domain.
262
263
264
265       apcupsd_lock_t
266
267       -  Set  files  with  the  apcupsd_lock_t type, if you want to treat the
268       files as apcupsd lock data, stored under the /var/lock directory
269
270
271       Paths:
272            /var/lock/LCK.., /var/lock/subsys/apcupsd
273
274
275       apcupsd_log_t
276
277       - Set files with the apcupsd_log_t type, if you want to treat the  data
278       as apcupsd log data, usually stored under the /var/log directory.
279
280
281       Paths:
282            /var/log/apcupsd.events.*, /var/log/apcupsd.status.*
283
284
285       apcupsd_power_t
286
287       -  Set  files  with  the apcupsd_power_t type, if you want to treat the
288       files as apcupsd power data.
289
290
291
292       apcupsd_tmp_t
293
294       - Set files with the apcupsd_tmp_t type, if you want to  store  apcupsd
295       temporary files in the /tmp directories.
296
297
298
299       apcupsd_unit_file_t
300
301       - Set files with the apcupsd_unit_file_t type, if you want to treat the
302       files as apcupsd unit content.
303
304
305
306       apcupsd_var_run_t
307
308       - Set files with the apcupsd_var_run_t type, if you want to  store  the
309       apcupsd files under the /run or /var/run directory.
310
311
312
313       Note:  File context can be temporarily modified with the chcon command.
314       If you want to permanently change the file context you need to use  the
315       semanage fcontext command.  This will modify the SELinux labeling data‐
316       base.  You will need to use restorecon to apply the labels.
317
318

COMMANDS

320       semanage fcontext can also be used to manipulate default  file  context
321       mappings.
322
323       semanage  permissive  can  also  be used to manipulate whether or not a
324       process type is permissive.
325
326       semanage module can also be used to enable/disable/install/remove  pol‐
327       icy modules.
328
329       semanage port can also be used to manipulate the port definitions
330
331       semanage boolean can also be used to manipulate the booleans
332
333
334       system-config-selinux is a GUI tool available to customize SELinux pol‐
335       icy settings.
336
337

AUTHOR

339       This manual page was auto-generated using sepolicy manpage .
340
341

SEE ALSO

343       selinux(8), apcupsd(8), semanage(8),  restorecon(8),  chcon(1),  sepol‐
344       icy(8), setsebool(8), apcupsd_cgi_script_selinux(8)
345
346
347
348apcupsd                            22-05-27                 apcupsd_selinux(8)
Impressum