keystone_selinux(8)

1keystone_selinux(8)         SELinux Policy keystone        keystone_selinux(8)
2
3
4

NAME

6       keystone_selinux - Security Enhanced Linux Policy for the keystone pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures the  keystone  processes  via  flexible
11       mandatory access control.
12
13       The  keystone  processes  execute with the keystone_t SELinux type. You
14       can check if you have these processes running by executing the ps  com‐
15       mand with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep keystone_t
20
21
22

ENTRYPOINTS

24       The keystone_t SELinux type can be entered via the keystone_exec_t file
25       type.
26
27       The default entrypoint paths for the keystone_t domain are the  follow‐
28       ing:
29
30       /usr/bin/keystone-all
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       keystone policy is very flexible allowing users to setup their keystone
40       processes in as secure a method as possible.
41
42       The following process types are defined for keystone:
43
44       keystone_t, keystone_cgi_script_t
45
46       Note: semanage permissive -a keystone_t can be used to make the process
47       type  keystone_t permissive. SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux  policy  is  customizable based on least access required.  key‐
54       stone policy is extremely flexible and has several booleans that  allow
55       you  to manipulate the policy and run keystone with the tightest access
56       possible.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66
67       If  you  want  to allow confined applications to run with kerberos, you
68       must turn on the kerberos_enabled boolean. Enabled by default.
69
70       setsebool -P kerberos_enabled 1
71
72
73
74       If you want to allow system to run with  NIS,  you  must  turn  on  the
75       nis_enabled boolean. Disabled by default.
76
77       setsebool -P nis_enabled 1
78
79
80

PORT TYPES

82       SELinux defines port types to represent TCP and UDP ports.
83
84       You  can  see  the  types associated with a port by using the following
85       command:
86
87       semanage port -l
88
89
90       Policy governs the access  confined  processes  have  to  these  ports.
91       SELinux  keystone policy is very flexible allowing users to setup their
92       keystone processes in as secure a method as possible.
93
94       The following port types are defined for keystone:
95
96
97       keystone_port_t
98
99
100
101       Default Defined Ports:
102                 tcp 35357
103                 udp 35357
104

MANAGED FILES

106       The SELinux process type keystone_t can manage files labeled  with  the
107       following file types.  The paths listed are the default paths for these
108       file types.  Note the processes UID still need to have DAC permissions.
109
110       cluster_conf_t
111
112            /etc/cluster(/.*)?
113
114       cluster_var_lib_t
115
116            /var/lib/pcsd(/.*)?
117            /var/lib/cluster(/.*)?
118            /var/lib/openais(/.*)?
119            /var/lib/pengine(/.*)?
120            /var/lib/corosync(/.*)?
121            /usr/lib/heartbeat(/.*)?
122            /var/lib/heartbeat(/.*)?
123            /var/lib/pacemaker(/.*)?
124
125       cluster_var_run_t
126
127            /var/run/crm(/.*)?
128            /var/run/cman_.*
129            /var/run/rsctmp(/.*)?
130            /var/run/aisexec.*
131            /var/run/heartbeat(/.*)?
132            /var/run/pcsd-ruby.socket
133            /var/run/corosync-qnetd(/.*)?
134            /var/run/corosync-qdevice(/.*)?
135            /var/run/corosync.pid
136            /var/run/cpglockd.pid
137            /var/run/rgmanager.pid
138            /var/run/cluster/rgmanager.sk
139
140       faillog_t
141
142            /var/log/btmp.*
143            /var/log/faillog.*
144            /var/log/tallylog.*
145            /var/run/faillock(/.*)?
146
147       keystone_tmp_t
148
149
150       keystone_var_lib_t
151
152            /var/lib/keystone(/.*)?
153
154       keystone_var_run_t
155
156            /var/run/keystone(/.*)?
157
158       krb5_host_rcache_t
159
160            /var/tmp/krb5_0.rcache2
161            /var/cache/krb5rcache(/.*)?
162            /var/tmp/nfs_0
163            /var/tmp/DNS_25
164            /var/tmp/host_0
165            /var/tmp/imap_0
166            /var/tmp/HTTP_23
167            /var/tmp/HTTP_48
168            /var/tmp/ldap_55
169            /var/tmp/ldap_487
170            /var/tmp/ldapmap1_0
171
172       lastlog_t
173
174            /var/log/lastlog.*
175
176       root_t
177
178            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
179            /
180            /initrd
181
182       security_t
183
184            /selinux
185
186

FILE CONTEXTS

188       SELinux requires files to have an extended attribute to define the file
189       type.
190
191       You can see the context of a file using the -Z option to ls
192
193       Policy  governs  the  access  confined  processes  have to these files.
194       SELinux keystone policy is very flexible allowing users to setup  their
195       keystone processes in as secure a method as possible.
196
197       STANDARD FILE CONTEXT
198
199       SELinux  defines the file context types for the keystone, if you wanted
200       to store files with these types in a diffent paths, you need to execute
201       the  semanage  command  to  specify alternate labeling and then use re‐
202       storecon to put the labels on disk.
203
204       semanage fcontext -a -t keystone_cgi_ra_content_t '/srv/mykeystone_con‐
205       tent(/.*)?'
206       restorecon -R -v /srv/mykeystone_content
207
208       Note:  SELinux  often  uses  regular expressions to specify labels that
209       match multiple files.
210
211       The following file types are defined for keystone:
212
213
214
215       keystone_cgi_content_t
216
217       - Set files with the keystone_cgi_content_t type, if you want to  treat
218       the files as keystone cgi content.
219
220
221
222       keystone_cgi_htaccess_t
223
224       - Set files with the keystone_cgi_htaccess_t type, if you want to treat
225       the file as a keystone cgi access file.
226
227
228
229       keystone_cgi_ra_content_t
230
231       - Set files with the keystone_cgi_ra_content_t type,  if  you  want  to
232       treat the files as keystone cgi read/append content.
233
234
235
236       keystone_cgi_rw_content_t
237
238       -  Set  files  with  the keystone_cgi_rw_content_t type, if you want to
239       treat the files as keystone cgi read/write content.
240
241
242
243       keystone_cgi_script_exec_t
244
245       - Set files with the keystone_cgi_script_exec_t type, if  you  want  to
246       transition an executable to the keystone_cgi_script_t domain.
247
248
249
250       keystone_exec_t
251
252       - Set files with the keystone_exec_t type, if you want to transition an
253       executable to the keystone_t domain.
254
255
256
257       keystone_initrc_exec_t
258
259       - Set files with the keystone_initrc_exec_t type, if you want to  tran‐
260       sition an executable to the keystone_initrc_t domain.
261
262
263
264       keystone_log_t
265
266       - Set files with the keystone_log_t type, if you want to treat the data
267       as keystone log data, usually stored under the /var/log directory.
268
269
270
271       keystone_tmp_t
272
273       - Set files with the keystone_tmp_t type, if you want to store keystone
274       temporary files in the /tmp directories.
275
276
277
278       keystone_unit_file_t
279
280       -  Set  files  with the keystone_unit_file_t type, if you want to treat
281       the files as keystone unit content.
282
283
284
285       keystone_var_lib_t
286
287       - Set files with the keystone_var_lib_t type, if you want to store  the
288       keystone files under the /var/lib directory.
289
290
291
292       keystone_var_run_t
293
294       -  Set files with the keystone_var_run_t type, if you want to store the
295       keystone files under the /run or /var/run directory.
296
297
298
299       Note: File context can be temporarily modified with the chcon  command.
300       If  you want to permanently change the file context you need to use the
301       semanage fcontext command.  This will modify the SELinux labeling data‐
302       base.  You will need to use restorecon to apply the labels.
303
304

COMMANDS

306       semanage  fcontext  can also be used to manipulate default file context
307       mappings.
308
309       semanage permissive can also be used to manipulate  whether  or  not  a
310       process type is permissive.
311
312       semanage  module can also be used to enable/disable/install/remove pol‐
313       icy modules.
314
315       semanage port can also be used to manipulate the port definitions
316
317       semanage boolean can also be used to manipulate the booleans
318
319
320       system-config-selinux is a GUI tool available to customize SELinux pol‐
321       icy settings.
322
323

AUTHOR

325       This manual page was auto-generated using sepolicy manpage .
326
327