1ksmtuned_selinux(8)         SELinux Policy ksmtuned        ksmtuned_selinux(8)
2
3
4

NAME

6       ksmtuned_selinux - Security Enhanced Linux Policy for the ksmtuned pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures the  ksmtuned  processes  via  flexible
11       mandatory access control.
12
13       The  ksmtuned  processes  execute with the ksmtuned_t SELinux type. You
14       can check if you have these processes running by executing the ps  com‐
15       mand with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep ksmtuned_t
20
21
22

ENTRYPOINTS

24       The ksmtuned_t SELinux type can be entered via the ksmtuned_exec_t file
25       type.
26
27       The default entrypoint paths for the ksmtuned_t domain are the  follow‐
28       ing:
29
30       /usr/sbin/ksmtuned
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       ksmtuned policy is very flexible allowing users to setup their ksmtuned
40       processes in as secure a method as possible.
41
42       The following process types are defined for ksmtuned:
43
44       ksmtuned_t
45
46       Note: semanage permissive -a ksmtuned_t can be used to make the process
47       type  ksmtuned_t permissive. SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux  policy  is  customizable based on least access required.  ksm‐
54       tuned policy is extremely flexible and has several booleans that  allow
55       you  to manipulate the policy and run ksmtuned with the tightest access
56       possible.
57
58
59
60       If you want to allow ksmtuned to use cifs/Samba file systems, you  must
61       turn on the ksmtuned_use_cifs boolean. Disabled by default.
62
63       setsebool -P ksmtuned_use_cifs 1
64
65
66
67       If you want to allow ksmtuned to use nfs file systems, you must turn on
68       the ksmtuned_use_nfs boolean. Disabled by default.
69
70       setsebool -P ksmtuned_use_nfs 1
71
72
73
74       If you want to allow all domains to execute in fips_mode, you must turn
75       on the fips_mode boolean. Enabled by default.
76
77       setsebool -P fips_mode 1
78
79
80
81       If  you  want  to  allow  system  to run with NIS, you must turn on the
82       nis_enabled boolean. Disabled by default.
83
84       setsebool -P nis_enabled 1
85
86
87

MANAGED FILES

89       The SELinux process type ksmtuned_t can manage files labeled  with  the
90       following file types.  The paths listed are the default paths for these
91       file types.  Note the processes UID still need to have DAC permissions.
92
93       cluster_conf_t
94
95            /etc/cluster(/.*)?
96
97       cluster_var_lib_t
98
99            /var/lib/pcsd(/.*)?
100            /var/lib/cluster(/.*)?
101            /var/lib/openais(/.*)?
102            /var/lib/pengine(/.*)?
103            /var/lib/corosync(/.*)?
104            /usr/lib/heartbeat(/.*)?
105            /var/lib/heartbeat(/.*)?
106            /var/lib/pacemaker(/.*)?
107
108       cluster_var_run_t
109
110            /var/run/crm(/.*)?
111            /var/run/cman_.*
112            /var/run/rsctmp(/.*)?
113            /var/run/aisexec.*
114            /var/run/heartbeat(/.*)?
115            /var/run/pcsd-ruby.socket
116            /var/run/corosync-qnetd(/.*)?
117            /var/run/corosync-qdevice(/.*)?
118            /var/run/corosync.pid
119            /var/run/cpglockd.pid
120            /var/run/rgmanager.pid
121            /var/run/cluster/rgmanager.sk
122
123       krb5_host_rcache_t
124
125            /var/tmp/krb5_0.rcache2
126            /var/cache/krb5rcache(/.*)?
127            /var/tmp/nfs_0
128            /var/tmp/DNS_25
129            /var/tmp/host_0
130            /var/tmp/imap_0
131            /var/tmp/HTTP_23
132            /var/tmp/HTTP_48
133            /var/tmp/ldap_55
134            /var/tmp/ldap_487
135            /var/tmp/ldapmap1_0
136
137       ksmtuned_var_run_t
138
139            /var/run/ksmtune.pid
140
141       root_t
142
143            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
144            /
145            /initrd
146
147       sysfs_t
148
149            /sys(/.*)?
150
151

FILE CONTEXTS

153       SELinux requires files to have an extended attribute to define the file
154       type.
155
156       You can see the context of a file using the -Z option to ls
157
158       Policy  governs  the  access  confined  processes  have to these files.
159       SELinux ksmtuned policy is very flexible allowing users to setup  their
160       ksmtuned processes in as secure a method as possible.
161
162       STANDARD FILE CONTEXT
163
164       SELinux  defines the file context types for the ksmtuned, if you wanted
165       to store files with these types in a diffent paths, you need to execute
166       the  semanage  command  to  specify alternate labeling and then use re‐
167       storecon to put the labels on disk.
168
169       semanage  fcontext  -a  -t   ksmtuned_var_run_t   '/srv/myksmtuned_con‐
170       tent(/.*)?'
171       restorecon -R -v /srv/myksmtuned_content
172
173       Note:  SELinux  often  uses  regular expressions to specify labels that
174       match multiple files.
175
176       The following file types are defined for ksmtuned:
177
178
179
180       ksmtuned_exec_t
181
182       - Set files with the ksmtuned_exec_t type, if you want to transition an
183       executable to the ksmtuned_t domain.
184
185
186
187       ksmtuned_initrc_exec_t
188
189       -  Set files with the ksmtuned_initrc_exec_t type, if you want to tran‐
190       sition an executable to the ksmtuned_initrc_t domain.
191
192
193
194       ksmtuned_log_t
195
196       - Set files with the ksmtuned_log_t type, if you want to treat the data
197       as ksmtuned log data, usually stored under the /var/log directory.
198
199
200
201       ksmtuned_unit_file_t
202
203       -  Set  files  with the ksmtuned_unit_file_t type, if you want to treat
204       the files as ksmtuned unit content.
205
206
207
208       ksmtuned_var_run_t
209
210       - Set files with the ksmtuned_var_run_t type, if you want to store  the
211       ksmtuned files under the /run or /var/run directory.
212
213
214
215       Note:  File context can be temporarily modified with the chcon command.
216       If you want to permanently change the file context you need to use  the
217       semanage fcontext command.  This will modify the SELinux labeling data‐
218       base.  You will need to use restorecon to apply the labels.
219
220

COMMANDS

222       semanage fcontext can also be used to manipulate default  file  context
223       mappings.
224
225       semanage  permissive  can  also  be used to manipulate whether or not a
226       process type is permissive.
227
228       semanage module can also be used to enable/disable/install/remove  pol‐
229       icy modules.
230
231       semanage boolean can also be used to manipulate the booleans
232
233
234       system-config-selinux is a GUI tool available to customize SELinux pol‐
235       icy settings.
236
237

AUTHOR

239       This manual page was auto-generated using sepolicy manpage .
240
241

SEE ALSO

243       selinux(8), ksmtuned(8), semanage(8), restorecon(8),  chcon(1),  sepol‐
244       icy(8), setsebool(8)
245
246
247
248ksmtuned                           22-05-27                ksmtuned_selinux(8)
Impressum