1lpadmin(8)                       OpenPrinting                       lpadmin(8)
2
3
4

NAME

6       lpadmin - configure cups printers and classes
7

SYNOPSIS

9       lpadmin [ -E ] [ -U username ] [ -h server[:port] ] -d destination
10       lpadmin [ -E ] [ -U username ] [ -h server[:port] ] -p destination [ -R
11       name-default ] option(s)
12       lpadmin [ -E ] [ -U username ] [ -h server[:port] ] -x destination
13

DESCRIPTION

15       lpadmin configures printer and class queues provided by CUPS.   It  can
16       also be used to set the server default printer or class.
17
18       When  specified  before the -d, -p, or -x options, the -E option forces
19       encryption when connecting to the server.
20
21       The first form of the command (-d) sets the default printer or class to
22       destination.   Subsequent  print jobs submitted via the lp(1) or lpr(1)
23       commands will use this destination unless the user specifies  otherwise
24       with the lpoptions(1) command.
25
26       The  second  form  of  the command (-p) configures the named printer or
27       class.  The additional options are described below.
28
29       The third form of the command (-x) deletes the printer or class  desti‐
30       nation.   Any jobs that are pending for the destination will be removed
31       and any job that is currently printed will be aborted.
32

OPTIONS

34       The following options are recognized when configuring a printer queue:
35
36       -c class
37            Adds the named printer to class.  If class does not  exist  it  is
38            created automatically.
39
40       -m model
41            Sets  a standard PPD file for the printer from the model directory
42            or using one of the driver interfaces.  Use the -m option with the
43            lpinfo(8)  command  to  get a list of supported models.  The model
44            "raw" clears any existing PPD  file  and  the  model  "everywhere"
45            queries  the  printer referred to by the specified IPP device-uri.
46            Note: Models other than "everywhere" are deprecated and  will  not
47            be supported in a future version of CUPS.
48
49       -o cupsIPPSupplies=true
50
51       -o cupsIPPSupplies=false
52            Specifies whether IPP supply level values should be reported.
53
54       -o cupsSNMPSupplies=true
55
56       -o cupsSNMPSupplies=false
57            Specifies  whether  SNMP  supply level (RFC 3805) values should be
58            reported.
59
60       -o job-k-limit=value
61            Sets the kilobyte limit for per-user quotas.  The value is an  in‐
62            teger number of kilobytes; one kilobyte is 1024 bytes.
63
64       -o job-page-limit=value
65            Sets the page limit for per-user quotas.  The value is the integer
66            number of pages  that  can  be  printed;  double-sided  pages  are
67            counted as two pages.
68
69       -o job-quota-period=value
70            Sets  the  accounting period for per-user quotas.  The value is an
71            integer number of seconds; 86,400 seconds are in one day.
72
73       -o job-sheets-default=banner
74
75       -o job-sheets-default=banner,banner
76            Sets the default banner page(s) to use for print jobs.
77
78       -o name=value
79            Sets a PPD option for the printer.  PPD options can be listed  us‐
80            ing the -l option with the lpoptions(1) command.
81
82       -o name-default=value
83            Sets a default server-side option for the destination.  Any print-
84            time option can be defaulted, e.g.,  "-o  number-up-default=2"  to
85            set the default "number-up" option value to 2.
86
87       -o port-monitor=name
88            Sets  the  binary  communications  program  to  use when printing,
89            "none", "bcp", or "tbcp".  The default  program  is  "none".   The
90            specified port monitor must be listed in the printer's PPD file.
91
92       -o printer-error-policy=name
93            Sets  the  policy for errors such as printers that cannot be found
94            or accessed, don't support the format being printed,  fail  during
95            submission  of  the  print  data,  or cause one or more filters to
96            crash.  The name must be one of "abort-job" (abort the job on  er‐
97            ror),  "retry-job"  (retry  the job at a future time), "retry-cur‐
98            rent-job" (retry the current job immediately),  or  "stop-printer"
99            (stop  the  printer on error).  The default error policy is "stop-
100            printer" for printers and "retry-current-job" for classes.
101
102       -o printer-is-shared=true
103
104       -o printer-is-shared=false
105            Sets the destination to shared/published or  unshared/unpublished.
106            Shared/published destinations are publicly announced by the server
107            on the LAN based on  the  browsing  configuration  in  cupsd.conf,
108            while  unshared/unpublished  destinations  are not announced.  The
109            default value is "true".
110
111       -o printer-op-policy=name
112            Sets the IPP operation policy  associated  with  the  destination.
113            The  name  must  be defined in the cupsd.conf in a Policy section.
114            The default operation policy is "default".
115
116       -R name-default
117            Deletes the named option from printer.
118
119       -r class
120            Removes the named printer from class.  If the resulting class  be‐
121            comes empty it is removed.
122
123       -u allow:{user|@group}{,user|,@group}*
124
125       -u deny:{user|@group}{,user|,@group}*
126
127       -u allow:all
128
129       -u deny:none
130            Sets  user-level  access control on a destination.  Names starting
131            with "@" are interpreted as UNIX groups.   The  latter  two  forms
132            turn  user-level access control off.  Note: The user 'root' is not
133            granted special access - using "-u allow:foo,bar" will allow users
134            'foo' and 'bar' to access the printer but NOT 'root'.
135
136       -v "device-uri"
137            Sets  the  device-uri  attribute of the printer queue.  Use the -v
138            option with the lpinfo(8) command to get a list of  supported  de‐
139            vice URIs and schemes.
140
141       -D "info"
142            Provides a textual description of the destination.
143
144       -E   When specified before the -d, -p, or -x options, forces the use of
145            TLS encryption on the connection to the scheduler.  Otherwise, en‐
146            ables  the  destination and accepts jobs; this is the same as run‐
147            ning the cupsaccept(8) and cupsenable(8) programs on the  destina‐
148            tion.
149
150       -L "location"
151            Provides a textual location of the destination.
152

DEPRECATED OPTIONS

154       The following lpadmin options are deprecated:
155
156       -i filename
157            This  option historically has been used to provide either a System
158            V interface script or (as an  implementation  side-effect)  a  PPD
159            file.   Note:  Interface  scripts  are not supported by CUPS.  PPD
160            files and printer drivers are deprecated and will not be supported
161            in a future version of CUPS.
162
163       -P ppd-file
164            Specifies  a PostScript Printer Description (PPD) file to use with
165            the printer.  Note: PPD files and printer drivers  are  deprecated
166            and will not be supported in a future version of CUPS.
167

CONFORMING TO

169       Unlike  the System V printing system, CUPS allows printer names to con‐
170       tain any printable character except SPACE, TAB,  "/",  or  "#".   Also,
171       printer and class names are not case-sensitive.
172
173       Finally,  the  CUPS  version  of lpadmin may ask the user for an access
174       password depending on the printing system configuration.  This  differs
175       from  the System V version which requires the root user to execute this
176       command.
177

NOTES

179       CUPS printer drivers and backends are deprecated and will no longer  be
180       supported  in  a  future feature release of CUPS.  Printers that do not
181       support   IPP   can   be   supported   using   applications   such   as
182       ippeveprinter(1).
183
184       The CUPS version of lpadmin does not support all of the System V or So‐
185       laris printing system configuration options.
186
187       Interface scripts are not supported for security reasons.
188
189       The double meaning of the -E option is an unfortunate  historical  odd‐
190       ity.
191
192       The  lpadmin  command  communicates  with the scheduler (cupsd) to make
193       changes to the printing system configuration.  This  configuration  in‐
194       formation  is  stored  in  several  files  including  printers.conf and
195       classes.conf.  These files should not be edited directly and are an im‐
196       plementation detail of CUPS that is subject to change at any time.
197

EXAMPLE

199       Create an IPP Everywhere print queue:
200
201           lpadmin -p myprinter -E -v ipp://myprinter.local/ipp/print -m everywhere
202
203

SEE ALSO

205       cupsaccept(8), cupsenable(8), lpinfo(8), lpoptions(1), CUPS Online Help
206       (http://localhost:631/help)
207
209       Copyright © 2021-2022 by OpenPrinting.
210
211
212
2132021-02-28                           CUPS                           lpadmin(8)
Impressum