1nslcd_selinux(8) SELinux Policy nslcd nslcd_selinux(8)
2
6 nslcd_selinux - Security Enhanced Linux Policy for the nslcd processes
7
9 Security-Enhanced Linux secures the nslcd processes via flexible manda‐
10 tory access control.
11 The nslcd processes execute with the nslcd_t SELinux type. You can
13 check if you have these processes running by executing the ps command
14 with the -Z qualifier.
15 For example:
17 ps -eZ | grep nslcd_t
19
23 The nslcd_t SELinux type can be entered via the nslcd_exec_t file type.
24 The default entrypoint paths for the nslcd_t domain are the following:
26 /usr/sbin/nslcd
28
30 SELinux defines process types (domains) for each process running on the
31 system
32 You can see the context of a process using the -Z option to ps
34 Policy governs the access confined processes have to files. SELinux
36 nslcd policy is very flexible allowing users to setup their nslcd pro‐
37 cesses in as secure a method as possible.
38 The following process types are defined for nslcd:
40 nslcd_t
42 Note: semanage permissive -a nslcd_t can be used to make the process
44 type nslcd_t permissive. SELinux does not deny access to permissive
45 process types, but the AVC (SELinux denials) messages are still gener‐
46 ated.
47
50 SELinux policy is customizable based on least access required. nslcd
51 policy is extremely flexible and has several booleans that allow you to
52 manipulate the policy and run nslcd with the tightest access possible.
53 If you want to allow all domains to execute in fips_mode, you must turn
57 on the fips_mode boolean. Enabled by default.
58 setsebool -P fips_mode 1
60 If you want to allow system to run with NIS, you must turn on the
64 nis_enabled boolean. Disabled by default.
65 setsebool -P nis_enabled 1
67
71 The SELinux process type nslcd_t can manage files labeled with the fol‐
72 lowing file types. The paths listed are the default paths for these
73 file types. Note the processes UID still need to have DAC permissions.
74 cluster_conf_t
76 /etc/cluster(/.*)?
78 cluster_var_lib_t
80 /var/lib/pcsd(/.*)?
82 /var/lib/cluster(/.*)?
83 /var/lib/openais(/.*)?
84 /var/lib/pengine(/.*)?
85 /var/lib/corosync(/.*)?
86 /usr/lib/heartbeat(/.*)?
87 /var/lib/heartbeat(/.*)?
88 /var/lib/pacemaker(/.*)?
89 cluster_var_run_t
91 /var/run/crm(/.*)?
93 /var/run/cman_.*
94 /var/run/rsctmp(/.*)?
95 /var/run/aisexec.*
96 /var/run/heartbeat(/.*)?
97 /var/run/pcsd-ruby.socket
98 /var/run/corosync-qnetd(/.*)?
99 /var/run/corosync-qdevice(/.*)?
100 /var/run/corosync.pid
101 /var/run/cpglockd.pid
102 /var/run/rgmanager.pid
103 /var/run/cluster/rgmanager.sk
104 krb5_host_rcache_t
106 /var/tmp/krb5_0.rcache2
108 /var/cache/krb5rcache(/.*)?
109 /var/tmp/nfs_0
110 /var/tmp/DNS_25
111 /var/tmp/host_0
112 /var/tmp/imap_0
113 /var/tmp/HTTP_23
114 /var/tmp/HTTP_48
115 /var/tmp/ldap_55
116 /var/tmp/ldap_487
117 /var/tmp/ldapmap1_0
118 nslcd_var_run_t
120 /var/run/nslcd(/.*)?
122 root_t
124 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
126 /
127 /initrd
128
131 SELinux requires files to have an extended attribute to define the file
132 type.
133 You can see the context of a file using the -Z option to ls
135 Policy governs the access confined processes have to these files.
137 SELinux nslcd policy is very flexible allowing users to setup their
138 nslcd processes in as secure a method as possible.
139 STANDARD FILE CONTEXT
141 SELinux defines the file context types for the nslcd, if you wanted to
143 store files with these types in a diffent paths, you need to execute
144 the semanage command to specify alternate labeling and then use re‐
145 storecon to put the labels on disk.
146 semanage fcontext -a -t nslcd_conf_t '/srv/mynslcd_content(/.*)?'
148 restorecon -R -v /srv/mynslcd_content
149 Note: SELinux often uses regular expressions to specify labels that
151 match multiple files.
152 The following file types are defined for nslcd:
154 nslcd_conf_t
158 - Set files with the nslcd_conf_t type, if you want to treat the files
160 as nslcd configuration data, usually stored under the /etc directory.
161 nslcd_exec_t
165 - Set files with the nslcd_exec_t type, if you want to transition an
167 executable to the nslcd_t domain.
168 nslcd_initrc_exec_t
172 - Set files with the nslcd_initrc_exec_t type, if you want to transi‐
174 tion an executable to the nslcd_initrc_t domain.
175 nslcd_var_run_t
179 - Set files with the nslcd_var_run_t type, if you want to store the
181 nslcd files under the /run or /var/run directory.
182 Note: File context can be temporarily modified with the chcon command.
186 If you want to permanently change the file context you need to use the
187 semanage fcontext command. This will modify the SELinux labeling data‐
188 base. You will need to use restorecon to apply the labels.
189
192 semanage fcontext can also be used to manipulate default file context
193 mappings.
194 semanage permissive can also be used to manipulate whether or not a
196 process type is permissive.
197 semanage module can also be used to enable/disable/install/remove pol‐
199 icy modules.
200 semanage boolean can also be used to manipulate the booleans
202 system-config-selinux is a GUI tool available to customize SELinux pol‐
205 icy settings.
206
209 This manual page was auto-generated using sepolicy manpage .
210
213 selinux(8), nslcd(8), semanage(8), restorecon(8), chcon(1), sepol‐
214 icy(8), setsebool(8)
215nslcd 22-05-27 nslcd_selinux(8)