1openwsman_selinux(8) SELinux Policy openwsman openwsman_selinux(8)
2
6 openwsman_selinux - Security Enhanced Linux Policy for the openwsman
7 processes
8
10 Security-Enhanced Linux secures the openwsman processes via flexible
11 mandatory access control.
12 The openwsman processes execute with the openwsman_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16 For example:
18 ps -eZ | grep openwsman_t
20
24 The openwsman_t SELinux type can be entered via the openwsman_exec_t
25 file type.
26 The default entrypoint paths for the openwsman_t domain are the follow‐
28 ing:
29 /usr/sbin/openwsmand
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 openwsman policy is very flexible allowing users to setup their openws‐
40 man processes in as secure a method as possible.
41 The following process types are defined for openwsman:
43 openwsman_t
45 Note: semanage permissive -a openwsman_t can be used to make the
47 process type openwsman_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. openws‐
54 man policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run openwsman with the tightest access
56 possible.
57 If you want to deny user domains applications to map a memory region as
61 both executable and writable, this is dangerous and the executable
62 should be reported in bugzilla, you must turn on the deny_execmem bool‐
63 ean. Enabled by default.
64 setsebool -P deny_execmem 1
66 If you want to control the ability to mmap a low area of the address
70 space, as configured by /proc/sys/vm/mmap_min_addr, you must turn on
71 the mmap_low_allowed boolean. Disabled by default.
72 setsebool -P mmap_low_allowed 1
74 If you want to disable kernel module loading, you must turn on the se‐
78 cure_mode_insmod boolean. Enabled by default.
79 setsebool -P secure_mode_insmod 1
81 If you want to allow unconfined executables to make their heap memory
85 executable. Doing this is a really bad idea. Probably indicates a
86 badly coded executable, but could indicate an attack. This executable
87 should be reported in bugzilla, you must turn on the selinuxuser_ex‐
88 echeap boolean. Disabled by default.
89 setsebool -P selinuxuser_execheap 1
91 If you want to allow unconfined executables to make their stack exe‐
95 cutable. This should never, ever be necessary. Probably indicates a
96 badly coded executable, but could indicate an attack. This executable
97 should be reported in bugzilla, you must turn on the selinuxuser_exec‐
98 stack boolean. Enabled by default.
99 setsebool -P selinuxuser_execstack 1
101
105 The SELinux process type openwsman_t can manage files labeled with the
106 following file types. The paths listed are the default paths for these
107 file types. Note the processes UID still need to have DAC permissions.
108 file_type
110 all files on the system
112
115 SELinux requires files to have an extended attribute to define the file
116 type.
117 You can see the context of a file using the -Z option to ls
119 Policy governs the access confined processes have to these files.
121 SELinux openwsman policy is very flexible allowing users to setup their
122 openwsman processes in as secure a method as possible.
123 STANDARD FILE CONTEXT
125 SELinux defines the file context types for the openwsman, if you wanted
127 to store files with these types in a diffent paths, you need to execute
128 the semanage command to specify alternate labeling and then use re‐
129 storecon to put the labels on disk.
130 semanage fcontext -a -t openwsman_unit_file_t '/srv/myopenwsman_con‐
132 tent(/.*)?'
133 restorecon -R -v /srv/myopenwsman_content
134 Note: SELinux often uses regular expressions to specify labels that
136 match multiple files.
137 The following file types are defined for openwsman:
139 openwsman_exec_t
143 - Set files with the openwsman_exec_t type, if you want to transition
145 an executable to the openwsman_t domain.
146 openwsman_log_t
150 - Set files with the openwsman_log_t type, if you want to treat the
152 data as openwsman log data, usually stored under the /var/log direc‐
153 tory.
154 openwsman_run_t
158 - Set files with the openwsman_run_t type, if you want to treat the
160 files as openwsman run data.
161 openwsman_tmp_t
165 - Set files with the openwsman_tmp_t type, if you want to store openws‐
167 man temporary files in the /tmp directories.
168 openwsman_tmpfs_t
172 - Set files with the openwsman_tmpfs_t type, if you want to store open‐
174 wsman files on a tmpfs file system.
175 openwsman_unit_file_t
179 - Set files with the openwsman_unit_file_t type, if you want to treat
181 the files as openwsman unit content.
182 Note: File context can be temporarily modified with the chcon command.
186 If you want to permanently change the file context you need to use the
187 semanage fcontext command. This will modify the SELinux labeling data‐
188 base. You will need to use restorecon to apply the labels.
189
192 semanage fcontext can also be used to manipulate default file context
193 mappings.
194 semanage permissive can also be used to manipulate whether or not a
196 process type is permissive.
197 semanage module can also be used to enable/disable/install/remove pol‐
199 icy modules.
200 semanage boolean can also be used to manipulate the booleans
202 system-config-selinux is a GUI tool available to customize SELinux pol‐
205 icy settings.
206
209 This manual page was auto-generated using sepolicy manpage .
210
213 selinux(8), openwsman(8), semanage(8), restorecon(8), chcon(1), sepol‐
214 icy(8), setsebool(8)
215openwsman 22-05-27 openwsman_selinux(8)