1rwho_selinux(8) SELinux Policy rwho rwho_selinux(8)
2
6 rwho_selinux - Security Enhanced Linux Policy for the rwho processes
7
9 Security-Enhanced Linux secures the rwho processes via flexible manda‐
10 tory access control.
11 The rwho processes execute with the rwho_t SELinux type. You can check
13 if you have these processes running by executing the ps command with
14 the -Z qualifier.
15 For example:
17 ps -eZ | grep rwho_t
19
23 The rwho_t SELinux type can be entered via the rwho_exec_t file type.
24 The default entrypoint paths for the rwho_t domain are the following:
26 /usr/sbin/rwhod
28
30 SELinux defines process types (domains) for each process running on the
31 system
32 You can see the context of a process using the -Z option to ps
34 Policy governs the access confined processes have to files. SELinux
36 rwho policy is very flexible allowing users to setup their rwho pro‐
37 cesses in as secure a method as possible.
38 The following process types are defined for rwho:
40 rwho_t
42 Note: semanage permissive -a rwho_t can be used to make the process
44 type rwho_t permissive. SELinux does not deny access to permissive
45 process types, but the AVC (SELinux denials) messages are still gener‐
46 ated.
47
50 SELinux policy is customizable based on least access required. rwho
51 policy is extremely flexible and has several booleans that allow you to
52 manipulate the policy and run rwho with the tightest access possible.
53 If you want to allow all domains to execute in fips_mode, you must turn
57 on the fips_mode boolean. Enabled by default.
58 setsebool -P fips_mode 1
60 If you want to allow system to run with NIS, you must turn on the
64 nis_enabled boolean. Disabled by default.
65 setsebool -P nis_enabled 1
67
71 SELinux defines port types to represent TCP and UDP ports.
72 You can see the types associated with a port by using the following
74 command:
75 semanage port -l
77 Policy governs the access confined processes have to these ports.
80 SELinux rwho policy is very flexible allowing users to setup their rwho
81 processes in as secure a method as possible.
82 The following port types are defined for rwho:
84 rwho_port_t
87 Default Defined Ports:
91 udp 513
92
94 The SELinux process type rwho_t can manage files labeled with the fol‐
95 lowing file types. The paths listed are the default paths for these
96 file types. Note the processes UID still need to have DAC permissions.
97 cluster_conf_t
99 /etc/cluster(/.*)?
101 cluster_var_lib_t
103 /var/lib/pcsd(/.*)?
105 /var/lib/cluster(/.*)?
106 /var/lib/openais(/.*)?
107 /var/lib/pengine(/.*)?
108 /var/lib/corosync(/.*)?
109 /usr/lib/heartbeat(/.*)?
110 /var/lib/heartbeat(/.*)?
111 /var/lib/pacemaker(/.*)?
112 cluster_var_run_t
114 /var/run/crm(/.*)?
116 /var/run/cman_.*
117 /var/run/rsctmp(/.*)?
118 /var/run/aisexec.*
119 /var/run/heartbeat(/.*)?
120 /var/run/pcsd-ruby.socket
121 /var/run/corosync-qnetd(/.*)?
122 /var/run/corosync-qdevice(/.*)?
123 /var/run/corosync.pid
124 /var/run/cpglockd.pid
125 /var/run/rgmanager.pid
126 /var/run/cluster/rgmanager.sk
127 krb5_host_rcache_t
129 /var/tmp/krb5_0.rcache2
131 /var/cache/krb5rcache(/.*)?
132 /var/tmp/nfs_0
133 /var/tmp/DNS_25
134 /var/tmp/host_0
135 /var/tmp/imap_0
136 /var/tmp/HTTP_23
137 /var/tmp/HTTP_48
138 /var/tmp/ldap_55
139 /var/tmp/ldap_487
140 /var/tmp/ldapmap1_0
141 root_t
143 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
145 /
146 /initrd
147 rwho_spool_t
149 /var/spool/rwho(/.*)?
151
154 SELinux requires files to have an extended attribute to define the file
155 type.
156 You can see the context of a file using the -Z option to ls
158 Policy governs the access confined processes have to these files.
160 SELinux rwho policy is very flexible allowing users to setup their rwho
161 processes in as secure a method as possible.
162 STANDARD FILE CONTEXT
164 SELinux defines the file context types for the rwho, if you wanted to
166 store files with these types in a diffent paths, you need to execute
167 the semanage command to specify alternate labeling and then use re‐
168 storecon to put the labels on disk.
169 semanage fcontext -a -t rwho_spool_t '/srv/myrwho_content(/.*)?'
171 restorecon -R -v /srv/myrwho_content
172 Note: SELinux often uses regular expressions to specify labels that
174 match multiple files.
175 The following file types are defined for rwho:
177 rwho_exec_t
181 - Set files with the rwho_exec_t type, if you want to transition an ex‐
183 ecutable to the rwho_t domain.
184 rwho_initrc_exec_t
188 - Set files with the rwho_initrc_exec_t type, if you want to transition
190 an executable to the rwho_initrc_t domain.
191 rwho_log_t
195 - Set files with the rwho_log_t type, if you want to treat the data as
197 rwho log data, usually stored under the /var/log directory.
198 rwho_spool_t
202 - Set files with the rwho_spool_t type, if you want to store the rwho
204 files under the /var/spool directory.
205 Note: File context can be temporarily modified with the chcon command.
209 If you want to permanently change the file context you need to use the
210 semanage fcontext command. This will modify the SELinux labeling data‐
211 base. You will need to use restorecon to apply the labels.
212
215 semanage fcontext can also be used to manipulate default file context
216 mappings.
217 semanage permissive can also be used to manipulate whether or not a
219 process type is permissive.
220 semanage module can also be used to enable/disable/install/remove pol‐
222 icy modules.
223 semanage port can also be used to manipulate the port definitions
225 semanage boolean can also be used to manipulate the booleans
227 system-config-selinux is a GUI tool available to customize SELinux pol‐
230 icy settings.
231
234 This manual page was auto-generated using sepolicy manpage .
235
238 selinux(8), rwho(8), semanage(8), restorecon(8), chcon(1), sepolicy(8),
239 setsebool(8)
240rwho 22-05-27 rwho_selinux(8)