1sosreport_selinux(8) SELinux Policy sosreport sosreport_selinux(8)
2
6 sosreport_selinux - Security Enhanced Linux Policy for the sosreport
7 processes
8
10 Security-Enhanced Linux secures the sosreport processes via flexible
11 mandatory access control.
12 The sosreport processes execute with the sosreport_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16 For example:
18 ps -eZ | grep sosreport_t
20
24 The sosreport_t SELinux type can be entered via the sosreport_exec_t
25 file type.
26 The default entrypoint paths for the sosreport_t domain are the follow‐
28 ing:
29 /usr/sbin/sosreport
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 sosreport policy is very flexible allowing users to setup their sosre‐
40 port processes in as secure a method as possible.
41 The following process types are defined for sosreport:
43 sosreport_t
45 Note: semanage permissive -a sosreport_t can be used to make the
47 process type sosreport_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. sosre‐
54 port policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run sosreport with the tightest access
56 possible.
57 If you want to deny user domains applications to map a memory region as
61 both executable and writable, this is dangerous and the executable
62 should be reported in bugzilla, you must turn on the deny_execmem bool‐
63 ean. Enabled by default.
64 setsebool -P deny_execmem 1
66 If you want to control the ability to mmap a low area of the address
70 space, as configured by /proc/sys/vm/mmap_min_addr, you must turn on
71 the mmap_low_allowed boolean. Disabled by default.
72 setsebool -P mmap_low_allowed 1
74 If you want to disable kernel module loading, you must turn on the se‐
78 cure_mode_insmod boolean. Enabled by default.
79 setsebool -P secure_mode_insmod 1
81 If you want to allow unconfined executables to make their heap memory
85 executable. Doing this is a really bad idea. Probably indicates a
86 badly coded executable, but could indicate an attack. This executable
87 should be reported in bugzilla, you must turn on the selinuxuser_ex‐
88 echeap boolean. Disabled by default.
89 setsebool -P selinuxuser_execheap 1
91 If you want to allow unconfined executables to make their stack exe‐
95 cutable. This should never, ever be necessary. Probably indicates a
96 badly coded executable, but could indicate an attack. This executable
97 should be reported in bugzilla, you must turn on the selinuxuser_exec‐
98 stack boolean. Enabled by default.
99 setsebool -P selinuxuser_execstack 1
101
105 The SELinux process type sosreport_t can manage files labeled with the
106 following file types. The paths listed are the default paths for these
107 file types. Note the processes UID still need to have DAC permissions.
108 file_type
110 all files on the system
112
115 SELinux requires files to have an extended attribute to define the file
116 type.
117 You can see the context of a file using the -Z option to ls
119 Policy governs the access confined processes have to these files.
121 SELinux sosreport policy is very flexible allowing users to setup their
122 sosreport processes in as secure a method as possible.
123 STANDARD FILE CONTEXT
125 SELinux defines the file context types for the sosreport, if you wanted
127 to store files with these types in a diffent paths, you need to execute
128 the semanage command to specify alternate labeling and then use re‐
129 storecon to put the labels on disk.
130 semanage fcontext -a -t sosreport_var_run_t '/srv/mysosreport_con‐
132 tent(/.*)?'
133 restorecon -R -v /srv/mysosreport_content
134 Note: SELinux often uses regular expressions to specify labels that
136 match multiple files.
137 The following file types are defined for sosreport:
139 sosreport_exec_t
143 - Set files with the sosreport_exec_t type, if you want to transition
145 an executable to the sosreport_t domain.
146 sosreport_tmp_t
150 - Set files with the sosreport_tmp_t type, if you want to store sosre‐
152 port temporary files in the /tmp directories.
153 sosreport_tmpfs_t
157 - Set files with the sosreport_tmpfs_t type, if you want to store sos‐
159 report files on a tmpfs file system.
160 sosreport_var_run_t
164 - Set files with the sosreport_var_run_t type, if you want to store the
166 sosreport files under the /run or /var/run directory.
167 Note: File context can be temporarily modified with the chcon command.
171 If you want to permanently change the file context you need to use the
172 semanage fcontext command. This will modify the SELinux labeling data‐
173 base. You will need to use restorecon to apply the labels.
174
177 semanage fcontext can also be used to manipulate default file context
178 mappings.
179 semanage permissive can also be used to manipulate whether or not a
181 process type is permissive.
182 semanage module can also be used to enable/disable/install/remove pol‐
184 icy modules.
185 semanage boolean can also be used to manipulate the booleans
187 system-config-selinux is a GUI tool available to customize SELinux pol‐
190 icy settings.
191
194 This manual page was auto-generated using sepolicy manpage .
195
198 selinux(8), sosreport(8), semanage(8), restorecon(8), chcon(1), sepol‐
199 icy(8), setsebool(8)
200sosreport 22-05-27 sosreport_selinux(8)