1stalld_selinux(8) SELinux Policy stalld stalld_selinux(8)
2
3
4
6 stalld_selinux - Security Enhanced Linux Policy for the stalld pro‐
7 cesses
8
10 Security-Enhanced Linux secures the stalld processes via flexible
11 mandatory access control.
12
13 The stalld processes execute with the stalld_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep stalld_t
20
21
22
24 The stalld_t SELinux type can be entered via the stalld_exec_t file
25 type.
26
27 The default entrypoint paths for the stalld_t domain are the following:
28
29 /usr/bin/stalld
30
32 SELinux defines process types (domains) for each process running on the
33 system
34
35 You can see the context of a process using the -Z option to ps
36
37 Policy governs the access confined processes have to files. SELinux
38 stalld policy is very flexible allowing users to setup their stalld
39 processes in as secure a method as possible.
40
41 The following process types are defined for stalld:
42
43 stalld_t
44
45 Note: semanage permissive -a stalld_t can be used to make the process
46 type stalld_t permissive. SELinux does not deny access to permissive
47 process types, but the AVC (SELinux denials) messages are still gener‐
48 ated.
49
50
52 SELinux policy is customizable based on least access required. stalld
53 policy is extremely flexible and has several booleans that allow you to
54 manipulate the policy and run stalld with the tightest access possible.
55
56
57
58 If you want to allow all domains to execute in fips_mode, you must turn
59 on the fips_mode boolean. Enabled by default.
60
61 setsebool -P fips_mode 1
62
63
64
66 The SELinux process type stalld_t can manage files labeled with the
67 following file types. The paths listed are the default paths for these
68 file types. Note the processes UID still need to have DAC permissions.
69
70 cluster_conf_t
71
72 /etc/cluster(/.*)?
73
74 cluster_var_lib_t
75
76 /var/lib/pcsd(/.*)?
77 /var/lib/cluster(/.*)?
78 /var/lib/openais(/.*)?
79 /var/lib/pengine(/.*)?
80 /var/lib/corosync(/.*)?
81 /usr/lib/heartbeat(/.*)?
82 /var/lib/heartbeat(/.*)?
83 /var/lib/pacemaker(/.*)?
84
85 cluster_var_run_t
86
87 /var/run/crm(/.*)?
88 /var/run/cman_.*
89 /var/run/rsctmp(/.*)?
90 /var/run/aisexec.*
91 /var/run/heartbeat(/.*)?
92 /var/run/pcsd-ruby.socket
93 /var/run/corosync-qnetd(/.*)?
94 /var/run/corosync-qdevice(/.*)?
95 /var/run/corosync.pid
96 /var/run/cpglockd.pid
97 /var/run/rgmanager.pid
98 /var/run/cluster/rgmanager.sk
99
100 debugfs_t
101
102 /sys/kernel/debug
103
104 root_t
105
106 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
107 /
108 /initrd
109
110 stalld_var_run_t
111
112 /var/run/stalld.pid
113
114
116 SELinux requires files to have an extended attribute to define the file
117 type.
118
119 You can see the context of a file using the -Z option to ls
120
121 Policy governs the access confined processes have to these files.
122 SELinux stalld policy is very flexible allowing users to setup their
123 stalld processes in as secure a method as possible.
124
125 STANDARD FILE CONTEXT
126
127 SELinux defines the file context types for the stalld, if you wanted to
128 store files with these types in a diffent paths, you need to execute
129 the semanage command to specify alternate labeling and then use re‐
130 storecon to put the labels on disk.
131
132 semanage fcontext -a -t stalld_var_run_t '/srv/mystalld_content(/.*)?'
133 restorecon -R -v /srv/mystalld_content
134
135 Note: SELinux often uses regular expressions to specify labels that
136 match multiple files.
137
138 The following file types are defined for stalld:
139
140
141
142 stalld_exec_t
143
144 - Set files with the stalld_exec_t type, if you want to transition an
145 executable to the stalld_t domain.
146
147
148
149 stalld_unit_file_t
150
151 - Set files with the stalld_unit_file_t type, if you want to treat the
152 files as stalld unit content.
153
154
155
156 stalld_var_run_t
157
158 - Set files with the stalld_var_run_t type, if you want to store the
159 stalld files under the /run or /var/run directory.
160
161
162
163 Note: File context can be temporarily modified with the chcon command.
164 If you want to permanently change the file context you need to use the
165 semanage fcontext command. This will modify the SELinux labeling data‐
166 base. You will need to use restorecon to apply the labels.
167
168
170 semanage fcontext can also be used to manipulate default file context
171 mappings.
172
173 semanage permissive can also be used to manipulate whether or not a
174 process type is permissive.
175
176 semanage module can also be used to enable/disable/install/remove pol‐
177 icy modules.
178
179 semanage boolean can also be used to manipulate the booleans
180
181
182 system-config-selinux is a GUI tool available to customize SELinux pol‐
183 icy settings.
184
185
187 This manual page was auto-generated using sepolicy manpage .
188
189
191 selinux(8), stalld(8), semanage(8), restorecon(8), chcon(1), sepol‐
192 icy(8), setsebool(8)
193
194
195
196stalld 22-05-27 stalld_selinux(8)