1varnishlog_selinux(8) SELinux Policy varnishlog varnishlog_selinux(8)
2
6 varnishlog_selinux - Security Enhanced Linux Policy for the varnishlog
7 processes
8
10 Security-Enhanced Linux secures the varnishlog processes via flexible
11 mandatory access control.
12 The varnishlog processes execute with the varnishlog_t SELinux type.
14 You can check if you have these processes running by executing the ps
15 command with the -Z qualifier.
16 For example:
18 ps -eZ | grep varnishlog_t
20
24 The varnishlog_t SELinux type can be entered via the varnishlog_exec_t
25 file type.
26 The default entrypoint paths for the varnishlog_t domain are the fol‐
28 lowing:
29 /usr/bin/varnishlog, /usr/bin/varnishncsa
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 varnishlog policy is very flexible allowing users to setup their var‐
40 nishlog processes in as secure a method as possible.
41 The following process types are defined for varnishlog:
43 varnishlog_t
45 Note: semanage permissive -a varnishlog_t can be used to make the
47 process type varnishlog_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. var‐
54 nishlog policy is extremely flexible and has several booleans that al‐
55 low you to manipulate the policy and run varnishlog with the tightest
56 access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64
68 The SELinux process type varnishlog_t can manage files labeled with the
69 following file types. The paths listed are the default paths for these
70 file types. Note the processes UID still need to have DAC permissions.
71 cluster_conf_t
73 /etc/cluster(/.*)?
75 cluster_var_lib_t
77 /var/lib/pcsd(/.*)?
79 /var/lib/cluster(/.*)?
80 /var/lib/openais(/.*)?
81 /var/lib/pengine(/.*)?
82 /var/lib/corosync(/.*)?
83 /usr/lib/heartbeat(/.*)?
84 /var/lib/heartbeat(/.*)?
85 /var/lib/pacemaker(/.*)?
86 cluster_var_run_t
88 /var/run/crm(/.*)?
90 /var/run/cman_.*
91 /var/run/rsctmp(/.*)?
92 /var/run/aisexec.*
93 /var/run/heartbeat(/.*)?
94 /var/run/pcsd-ruby.socket
95 /var/run/corosync-qnetd(/.*)?
96 /var/run/corosync-qdevice(/.*)?
97 /var/run/corosync.pid
98 /var/run/cpglockd.pid
99 /var/run/rgmanager.pid
100 /var/run/cluster/rgmanager.sk
101 root_t
103 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
105 /
106 /initrd
107 varnishlog_var_run_t
109 /var/run/varnishlog.pid
111 /var/run/varnishncsa.pid
112
115 SELinux requires files to have an extended attribute to define the file
116 type.
117 You can see the context of a file using the -Z option to ls
119 Policy governs the access confined processes have to these files.
121 SELinux varnishlog policy is very flexible allowing users to setup
122 their varnishlog processes in as secure a method as possible.
123 STANDARD FILE CONTEXT
125 SELinux defines the file context types for the varnishlog, if you
127 wanted to store files with these types in a diffent paths, you need to
128 execute the semanage command to specify alternate labeling and then use
129 restorecon to put the labels on disk.
130 semanage fcontext -a -t varnishlog_log_t '/srv/myvarnishlog_con‐
132 tent(/.*)?'
133 restorecon -R -v /srv/myvarnishlog_content
134 Note: SELinux often uses regular expressions to specify labels that
136 match multiple files.
137 The following file types are defined for varnishlog:
139 varnishlog_exec_t
143 - Set files with the varnishlog_exec_t type, if you want to transition
145 an executable to the varnishlog_t domain.
146 Paths:
149 /usr/bin/varnishlog, /usr/bin/varnishncsa
150 varnishlog_initrc_exec_t
153 - Set files with the varnishlog_initrc_exec_t type, if you want to
155 transition an executable to the varnishlog_initrc_t domain.
156 Paths:
159 /etc/rc.d/init.d/varnishlog, /etc/rc.d/init.d/varnishncsa
160 varnishlog_log_t
163 - Set files with the varnishlog_log_t type, if you want to treat the
165 data as varnishlog log data, usually stored under the /var/log direc‐
166 tory.
167 varnishlog_var_run_t
171 - Set files with the varnishlog_var_run_t type, if you want to store
173 the varnishlog files under the /run or /var/run directory.
174 Paths:
177 /var/run/varnishlog.pid, /var/run/varnishncsa.pid
178 Note: File context can be temporarily modified with the chcon command.
181 If you want to permanently change the file context you need to use the
182 semanage fcontext command. This will modify the SELinux labeling data‐
183 base. You will need to use restorecon to apply the labels.
184
187 semanage fcontext can also be used to manipulate default file context
188 mappings.
189 semanage permissive can also be used to manipulate whether or not a
191 process type is permissive.
192 semanage module can also be used to enable/disable/install/remove pol‐
194 icy modules.
195 semanage boolean can also be used to manipulate the booleans
197 system-config-selinux is a GUI tool available to customize SELinux pol‐
200 icy settings.
201
204 This manual page was auto-generated using sepolicy manpage .
205
208 selinux(8), varnishlog(8), semanage(8), restorecon(8), chcon(1), sepol‐
209 icy(8), setsebool(8)
210varnishlog 22-05-27 varnishlog_selinux(8)