1nut_upsd_selinux(8) SELinux Policy nut_upsd nut_upsd_selinux(8)
2
3
4
6 nut_upsd_selinux - Security Enhanced Linux Policy for the nut_upsd pro‐
7 cesses
8
10 Security-Enhanced Linux secures the nut_upsd processes via flexible
11 mandatory access control.
12
13 The nut_upsd processes execute with the nut_upsd_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep nut_upsd_t
20
21
22
24 The nut_upsd_t SELinux type can be entered via the nut_upsd_exec_t file
25 type.
26
27 The default entrypoint paths for the nut_upsd_t domain are the follow‐
28 ing:
29
30 /usr/sbin/upsd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 nut_upsd policy is very flexible allowing users to setup their nut_upsd
40 processes in as secure a method as possible.
41
42 The following process types are defined for nut_upsd:
43
44 nut_upsd_t, nut_upsdrvctl_t
45
46 Note: semanage permissive -a nut_upsd_t can be used to make the process
47 type nut_upsd_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
51
53 SELinux policy is customizable based on least access required.
54 nut_upsd policy is extremely flexible and has several booleans that al‐
55 low you to manipulate the policy and run nut_upsd with the tightest ac‐
56 cess possible.
57
58
59
60 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62
63 setsebool -P fips_mode 1
64
65
66
68 The SELinux process type nut_upsd_t can manage files labeled with the
69 following file types. The paths listed are the default paths for these
70 file types. Note the processes UID still need to have DAC permissions.
71
72 cluster_conf_t
73
74 /etc/cluster(/.*)?
75
76 cluster_var_lib_t
77
78 /var/lib/pcsd(/.*)?
79 /var/lib/cluster(/.*)?
80 /var/lib/openais(/.*)?
81 /var/lib/pengine(/.*)?
82 /var/lib/corosync(/.*)?
83 /usr/lib/heartbeat(/.*)?
84 /var/lib/heartbeat(/.*)?
85 /var/lib/pacemaker(/.*)?
86
87 cluster_var_run_t
88
89 /var/run/crm(/.*)?
90 /var/run/cman_.*
91 /var/run/rsctmp(/.*)?
92 /var/run/aisexec.*
93 /var/run/heartbeat(/.*)?
94 /var/run/pcsd-ruby.socket
95 /var/run/corosync-qnetd(/.*)?
96 /var/run/corosync-qdevice(/.*)?
97 /var/run/corosync.pid
98 /var/run/cpglockd.pid
99 /var/run/rgmanager.pid
100 /var/run/cluster/rgmanager.sk
101
102 krb5_host_rcache_t
103
104 /var/tmp/krb5_0.rcache2
105 /var/cache/krb5rcache(/.*)?
106 /var/tmp/nfs_0
107 /var/tmp/DNS_25
108 /var/tmp/host_0
109 /var/tmp/imap_0
110 /var/tmp/HTTP_23
111 /var/tmp/HTTP_48
112 /var/tmp/ldap_55
113 /var/tmp/ldap_487
114 /var/tmp/ldapmap1_0
115
116 nut_upsd_tmp_t
117
118
119 nut_var_run_t
120
121 /var/run/nut(/.*)?
122
123 root_t
124
125 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
126 /
127 /initrd
128
129
131 SELinux requires files to have an extended attribute to define the file
132 type.
133
134 You can see the context of a file using the -Z option to ls
135
136 Policy governs the access confined processes have to these files.
137 SELinux nut_upsd policy is very flexible allowing users to setup their
138 nut_upsd processes in as secure a method as possible.
139
140 STANDARD FILE CONTEXT
141
142 SELinux defines the file context types for the nut_upsd, if you wanted
143 to store files with these types in a diffent paths, you need to execute
144 the semanage command to specify alternate labeling and then use re‐
145 storecon to put the labels on disk.
146
147 semanage fcontext -a -t nut_upsdrvctl_tmp_t '/srv/mynut_upsd_con‐
148 tent(/.*)?'
149 restorecon -R -v /srv/mynut_upsd_content
150
151 Note: SELinux often uses regular expressions to specify labels that
152 match multiple files.
153
154 The following file types are defined for nut_upsd:
155
156
157
158 nut_upsd_exec_t
159
160 - Set files with the nut_upsd_exec_t type, if you want to transition an
161 executable to the nut_upsd_t domain.
162
163
164
165 nut_upsd_tmp_t
166
167 - Set files with the nut_upsd_tmp_t type, if you want to store nut upsd
168 temporary files in the /tmp directories.
169
170
171
172 nut_upsdrvctl_exec_t
173
174 - Set files with the nut_upsdrvctl_exec_t type, if you want to transi‐
175 tion an executable to the nut_upsdrvctl_t domain.
176
177
178 Paths:
179 /sbin/upsdrvctl, /usr/sbin/upsdrvctl, /usr/sbin/blazer_usb
180
181
182 nut_upsdrvctl_tmp_t
183
184 - Set files with the nut_upsdrvctl_tmp_t type, if you want to store nut
185 upsdrvctl temporary files in the /tmp directories.
186
187
188
189 Note: File context can be temporarily modified with the chcon command.
190 If you want to permanently change the file context you need to use the
191 semanage fcontext command. This will modify the SELinux labeling data‐
192 base. You will need to use restorecon to apply the labels.
193
194
196 semanage fcontext can also be used to manipulate default file context
197 mappings.
198
199 semanage permissive can also be used to manipulate whether or not a
200 process type is permissive.
201
202 semanage module can also be used to enable/disable/install/remove pol‐
203 icy modules.
204
205 semanage boolean can also be used to manipulate the booleans
206
207
208 system-config-selinux is a GUI tool available to customize SELinux pol‐
209 icy settings.
210
211
213 This manual page was auto-generated using sepolicy manpage .
214
215
217 selinux(8), nut_upsd(8), semanage(8), restorecon(8), chcon(1), sepol‐
218 icy(8), setsebool(8)
219
220
221
222nut_upsd 22-05-27 nut_upsd_selinux(8)