1zarafa_spooler_selinux(8)SELinux Policy zarafa_spoolerzarafa_spooler_selinux(8)
2
6 zarafa_spooler_selinux - Security Enhanced Linux Policy for the
7 zarafa_spooler processes
8
10 Security-Enhanced Linux secures the zarafa_spooler processes via flexi‐
11 ble mandatory access control.
12 The zarafa_spooler processes execute with the zarafa_spooler_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep zarafa_spooler_t
20
24 The zarafa_spooler_t SELinux type can be entered via the
25 zarafa_spooler_exec_t file type.
26 The default entrypoint paths for the zarafa_spooler_t domain are the
28 following:
29 /usr/bin/zarafa-spooler
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 zarafa_spooler policy is very flexible allowing users to setup their
40 zarafa_spooler processes in as secure a method as possible.
41 The following process types are defined for zarafa_spooler:
43 zarafa_spooler_t
45 Note: semanage permissive -a zarafa_spooler_t can be used to make the
47 process type zarafa_spooler_t permissive. SELinux does not deny access
48 to permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required.
54 zarafa_spooler policy is extremely flexible and has several booleans
55 that allow you to manipulate the policy and run zarafa_spooler with the
56 tightest access possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow zarafa domains to setrlimit/sys_resource, you must
68 turn on the zarafa_setrlimit boolean. Disabled by default.
69 setsebool -P zarafa_setrlimit 1
71
75 The SELinux process type zarafa_spooler_t can manage files labeled with
76 the following file types. The paths listed are the default paths for
77 these file types. Note the processes UID still need to have DAC per‐
78 missions.
79 cluster_conf_t
81 /etc/cluster(/.*)?
83 cluster_var_lib_t
85 /var/lib/pcsd(/.*)?
87 /var/lib/cluster(/.*)?
88 /var/lib/openais(/.*)?
89 /var/lib/pengine(/.*)?
90 /var/lib/corosync(/.*)?
91 /usr/lib/heartbeat(/.*)?
92 /var/lib/heartbeat(/.*)?
93 /var/lib/pacemaker(/.*)?
94 cluster_var_run_t
96 /var/run/crm(/.*)?
98 /var/run/cman_.*
99 /var/run/rsctmp(/.*)?
100 /var/run/aisexec.*
101 /var/run/heartbeat(/.*)?
102 /var/run/pcsd-ruby.socket
103 /var/run/corosync-qnetd(/.*)?
104 /var/run/corosync-qdevice(/.*)?
105 /var/run/corosync.pid
106 /var/run/cpglockd.pid
107 /var/run/rgmanager.pid
108 /var/run/cluster/rgmanager.sk
109 krb5_host_rcache_t
111 /var/tmp/krb5_0.rcache2
113 /var/cache/krb5rcache(/.*)?
114 /var/tmp/nfs_0
115 /var/tmp/DNS_25
116 /var/tmp/host_0
117 /var/tmp/imap_0
118 /var/tmp/HTTP_23
119 /var/tmp/HTTP_48
120 /var/tmp/ldap_55
121 /var/tmp/ldap_487
122 /var/tmp/ldapmap1_0
123 root_t
125 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
127 /
128 /initrd
129 zarafa_spooler_log_t
131 /var/log/zarafa/spooler.log.*
133 zarafa_spooler_var_run_t
135 /var/run/zarafa-spooler.pid
137
140 SELinux requires files to have an extended attribute to define the file
141 type.
142 You can see the context of a file using the -Z option to ls
144 Policy governs the access confined processes have to these files.
146 SELinux zarafa_spooler policy is very flexible allowing users to setup
147 their zarafa_spooler processes in as secure a method as possible.
148 STANDARD FILE CONTEXT
150 SELinux defines the file context types for the zarafa_spooler, if you
152 wanted to store files with these types in a diffent paths, you need to
153 execute the semanage command to specify alternate labeling and then use
154 restorecon to put the labels on disk.
155 semanage fcontext -a -t zarafa_spooler_var_run_t
157 '/srv/myzarafa_spooler_content(/.*)?'
158 restorecon -R -v /srv/myzarafa_spooler_content
159 Note: SELinux often uses regular expressions to specify labels that
161 match multiple files.
162 The following file types are defined for zarafa_spooler:
164 zarafa_spooler_exec_t
168 - Set files with the zarafa_spooler_exec_t type, if you want to transi‐
170 tion an executable to the zarafa_spooler_t domain.
171 zarafa_spooler_log_t
175 - Set files with the zarafa_spooler_log_t type, if you want to treat
177 the data as zarafa spooler log data, usually stored under the /var/log
178 directory.
179 zarafa_spooler_var_run_t
183 - Set files with the zarafa_spooler_var_run_t type, if you want to
185 store the zarafa spooler files under the /run or /var/run directory.
186 Note: File context can be temporarily modified with the chcon command.
190 If you want to permanently change the file context you need to use the
191 semanage fcontext command. This will modify the SELinux labeling data‐
192 base. You will need to use restorecon to apply the labels.
193
196 semanage fcontext can also be used to manipulate default file context
197 mappings.
198 semanage permissive can also be used to manipulate whether or not a
200 process type is permissive.
201 semanage module can also be used to enable/disable/install/remove pol‐
203 icy modules.
204 semanage boolean can also be used to manipulate the booleans
206 system-config-selinux is a GUI tool available to customize SELinux pol‐
209 icy settings.
210
213 This manual page was auto-generated using sepolicy manpage .
214
217 selinux(8), zarafa_spooler(8), semanage(8), restorecon(8), chcon(1),
218 sepolicy(8), setsebool(8)
219zarafa_spooler 22-05-27 zarafa_spooler_selinux(8)