1sinfo(1) Slurm Commands sinfo(1)
2
6 sinfo - View information about Slurm nodes and partitions.
7
10 sinfo [OPTIONS...]
11
13 sinfo is used to view partition and node information for a system run‐
14 ning Slurm.
15
18 -a, --all
19 Display information about all partitions. This causes informa‐
20 tion to be displayed about partitions that are configured as
21 hidden and partitions that are unavailable to the user's group.
22 -M, --clusters=<string>
24 Clusters to issue commands to. Multiple cluster names may be
25 comma separated. A value of 'all' will query all clusters. Note
26 that the SlurmDBD must be up for this option to work properly.
27 This option implicitly sets the --local option.
28 -d, --dead
30 If set, only report state information for non-responding (dead)
31 nodes.
32 -e, --exact
34 If set, do not group node information on multiple nodes unless
35 their configurations to be reported are identical. Otherwise cpu
36 count, memory size, and disk space for nodes will be listed with
37 the minimum value followed by a "+" for nodes with the same par‐
38 tition and state (e.g. "250+").
39 --federation
41 Show all partitions from the federation if a member of one.
42 -o, --format=<output_format>
44 Specify the information to be displayed using an sinfo format
45 string. If the command is executed in a federated cluster envi‐
46 ronment and information about more than one cluster is to be
47 displayed and the -h, --noheader option is used, then the clus‐
48 ter name will be displayed before the default output formats
49 shown below. Format strings transparently used by sinfo when
50 running with various options are:
51 default "%#P %.5a %.10l %.6D %.6t %N"
53 --summarize "%#P %.5a %.10l %.16F %N"
55 --long "%#P %.5a %.10l %.10s %.4r %.8h %.10g %.6D %.11T
57 %N"
58 --Node "%#N %.6D %#P %6t"
60 --long --Node "%#N %.6D %#P %.11T %.4c %.8z %.6m %.8d %.6w %.8f
62 %20E"
63 --list-reasons "%20E %9u %19H %N"
65 --long --list-reasons
67 "%20E %12U %19H %6t %N"
68 In the above format strings, the use of "#" represents the maxi‐
70 mum length of any partition name or node list to be printed. A
71 pass is made over the records to be printed to establish the
72 size in order to align the sinfo output, then a second pass is
73 made over the records to print them. Note that the literal
74 character "#" itself is not a valid field length specification,
75 but is only used to document this behaviour.
76 The format of each field is "%[[.]size]type[suffix]"
78 size Minimum field size. If no size is specified, whatever
80 is needed to print the information will be used.
81 . Indicates the output should be right justified and
83 size must be specified. By default output is left
84 justified.
85 suffix Arbitrary string to append to the end of the field.
87 Valid type specifications include:
89 %all Print all fields available for this data type with a ver‐
91 tical bar separating each field.
92 %a State/availability of a partition.
94 %A Number of nodes by state in the format "allocated/idle".
96 Do not use this with a node state option ("%t" or "%T") or
97 the different node states will be placed on separate
98 lines.
99 %b Features currently active on the nodes, also see %f.
101 %B The max number of CPUs per node available to jobs in the
103 partition.
104 %c Number of CPUs per node.
106 %C Number of CPUs by state in the format "allo‐
108 cated/idle/other/total". Do not use this with a node state
109 option ("%t" or "%T") or the different node states will be
110 placed on separate lines.
111 %d Size of temporary disk space per node in megabytes.
113 %D Number of nodes.
115 %e Free memory of a node.
117 %E The reason a node is unavailable (down, drained, or drain‐
119 ing states).
120 %f Features available the nodes, also see %b.
122 %F Number of nodes by state in the format "allo‐
124 cated/idle/other/total". Note the use of this format op‐
125 tion with a node state format option ("%t" or "%T") will
126 result in the different node states being be reported on
127 separate lines.
128 %g Groups which may use the nodes.
130 %G Generic resources (gres) associated with the nodes.
132 %h Print the OverSubscribe setting for the partition.
134 %H Print the timestamp of the reason a node is unavailable.
136 %I Partition job priority weighting factor.
138 %l Maximum time for any job in the format "days-hours:min‐
140 utes:seconds"
141 %L Default time for any job in the format "days-hours:min‐
143 utes:seconds"
144 %m Size of memory per node in megabytes.
146 %M PreemptionMode.
148 %n List of node hostnames.
150 %N List of node names.
152 %o List of node communication addresses.
154 %O CPU load of a node.
156 %p Partition scheduling tier priority.
158 %P Partition name followed by "*" for the default partition,
160 also see %R.
161 %r Only user root may initiate jobs, "yes" or "no".
163 %R Partition name, also see %P.
165 %s Maximum job size in nodes.
167 %S Allowed allocating nodes.
169 %t State of nodes, compact form.
171 %T State of nodes, extended form.
173 %u Print the user name of who set the reason a node is un‐
175 available.
176 %U Print the user name and uid of who set the reason a node
178 is unavailable.
179 %v Print the version of the running slurmd daemon.
181 %V Print the cluster name if running in a federation.
183 %w Scheduling weight of the nodes.
185 %X Number of sockets per node.
187 %Y Number of cores per socket.
189 %Z Number of threads per core.
191 %z Extended processor information: number of sockets, cores,
193 threads (S:C:T) per node.
194 -O, --Format=<output_format>
196 Specify the information to be displayed. Also see the -o <out‐
197 put_format>, --format=<output_format> option (which supports
198 greater flexibility in formatting, but does not support access
199 to all fields because we ran out of letters). Requests a comma
200 separated list of job information to be displayed.
201 The format of each field is "type[:[.][size][suffix]]"
203 size The minimum field size. If no size is specified, 20
205 characters will be allocated to print the information.
206 . Indicates the output should be right justified and
208 size must be specified. By default, output is left
209 justified.
210 suffix Arbitrary string to append to the end of the field.
212 Valid type specifications include:
214 All Print all fields available in the -o format for this data
216 type with a vertical bar separating each field.
217 AllocMem
219 Prints the amount of allocated memory on a node.
220 AllocNodes
222 Allowed allocating nodes.
223 Available
225 State/availability of a partition.
226 Cluster
228 Print the cluster name if running in a federation.
229 Comment
231 Comment. (Arbitrary descriptive string)
232 Cores Number of cores per socket.
234 CPUs Number of CPUs per node.
236 CPUsLoad
238 CPU load of a node.
239 CPUsState
241 Number of CPUs by state in the format "allo‐
242 cated/idle/other/total". Do not use this with a node
243 state option ("%t" or "%T") or the different node states
244 will be placed on separate lines.
245 DefaultTime
247 Default time for any job in the format "days-hours:min‐
248 utes:seconds".
249 Disk Size of temporary disk space per node in megabytes.
251 Extra Arbitrary string on the node.
253 Features
255 Features available on the nodes. Also see features_act.
256 features_act
258 Features currently active on the nodes. Also see fea‐
259 tures.
260 FreeMem
262 Free memory of a node.
263 Gres Generic resources (gres) associated with the nodes.
265 GresUsed
267 Generic resources (gres) currently in use on the nodes.
268 Groups Groups which may use the nodes.
270 MaxCPUsPerNode
272 The max number of CPUs per node available to jobs in the
273 partition.
274 Memory Size of memory per node in megabytes.
276 NodeAddr
278 List of node communication addresses.
279 NodeAI Number of nodes by state in the format "allocated/idle".
281 Do not use this with a node state option ("%t" or "%T")
282 or the different node states will be placed on separate
283 lines.
284 NodeAIOT
286 Number of nodes by state in the format "allo‐
287 cated/idle/other/total". Do not use this with a node
288 state option ("%t" or "%T") or the different node states
289 will be placed on separate lines.
290 NodeHost
292 List of node hostnames.
293 NodeList
295 List of node names.
296 Nodes Number of nodes.
298 OverSubscribe
300 Whether jobs may oversubscribe compute resources (e.g.
301 CPUs).
302 Partition
304 Partition name followed by "*" for the default partition,
305 also see %R.
306 PartitionName
308 Partition name, also see %P.
309 Port Node TCP port.
311 PreemptMode
313 Preemption mode.
314 PriorityJobFactor
316 Partition factor used by priority/multifactor plugin in
317 calculating job priority.
318 PriorityTier or Priority
320 Partition scheduling tier priority.
321 Reason The reason a node is unavailable (down, drained, or
323 draining states).
324 Root Only user root may initiate jobs, "yes" or "no".
326 Size Maximum job size in nodes.
328 SocketCoreThread
330 Extended processor information: number of sockets, cores,
331 threads (S:C:T) per node.
332 Sockets
334 Number of sockets per node.
335 StateCompact
337 State of nodes, compact form.
338 StateLong
340 State of nodes, extended form.
341 StateComplete
343 State of nodes, including all node state flags. eg.
344 "idle+cloud+power"
345 Threads
347 Number of threads per core.
348 Time Maximum time for any job in the format "days-hours:min‐
350 utes:seconds".
351 TimeStamp
353 Print the timestamp of the reason a node is unavailable.
354 User Print the user name of who set the reason a node is un‐
356 available.
357 UserLong
359 Print the user name and uid of who set the reason a node
360 is unavailable.
361 Version
363 Print the version of the running slurmd daemon.
364 Weight Scheduling weight of the nodes.
366 --help Print a message describing all sinfo options.
368 --hide Do not display information about hidden partitions. Partitions
370 that are configured as hidden or are not available to the user's
371 group will not be displayed. This is the default behavior.
372 -i, --iterate=<seconds>
374 Print the state on a periodic basis. Sleep for the indicated
375 number of seconds between reports. By default prints a time
376 stamp with the header.
377 --json Dump node information as JSON. All other formatting and filter‐
379 ing arguments will be ignored.
380 -R, --list-reasons
382 List reasons nodes are in the down, drained, fail or failing
383 state. When nodes are in these states Slurm supports the inclu‐
384 sion of a "reason" string by an administrator. This option will
385 display the first 20 characters of the reason field and list of
386 nodes with that reason for all nodes that are, by default, down,
387 drained, draining or failing. This option may be used with
388 other node filtering options (e.g. -r, -d, -t, -n), however,
389 combinations of these options that result in a list of nodes
390 that are not down or drained or failing will not produce any
391 output. When used with -l the output additionally includes the
392 current node state.
393 --local
395 Show only jobs local to this cluster. Ignore other clusters in
396 this federation (if any). Overrides --federation.
397 -l, --long
399 Print more detailed information. This is ignored if the --for‐
400 mat option is specified.
401 --noconvert
403 Don't convert units from their original type (e.g. 2048M won't
404 be converted to 2G).
405 -N, --Node
407 Print information in a node-oriented format with one line per
408 node and partition. That is, if a node belongs to more than one
409 partition, then one line for each node-partition pair will be
410 shown. If --partition is also specified, then only one line per
411 node in this partition is shown. The default is to print infor‐
412 mation in a partition-oriented format. This is ignored if the
413 --format option is specified.
414 -n, --nodes=<nodes>
416 Print information about the specified node(s). Multiple nodes
417 may be comma separated or expressed using a node range expres‐
418 sion (e.g. "linux[00-17]") Limiting the query to just the rele‐
419 vant nodes can measurably improve the performance of the command
420 for large clusters.
421 -h, --noheader
423 Do not print a header on the output.
424 -p, --partition=<partition>
426 Print information only about the specified partition(s). Multi‐
427 ple partitions are separated by commas.
428 -T, --reservation
430 Only display information about Slurm reservations.
431 NOTE: This option causes sinfo to ignore most other options,
433 which are focused on partition and node information.
434 -r, --responding
436 If set only report state information for responding nodes.
437 -S, --sort=<sort_list>
439 Specification of the order in which records should be reported.
440 This uses the same field specification as the <output_format>.
441 Multiple sorts may be performed by listing multiple sort fields
442 separated by commas. The field specifications may be preceded
443 by "+" or "-" for ascending (default) and descending order re‐
444 spectively. The partition field specification, "P", may be pre‐
445 ceded by a "#" to report partitions in the same order that they
446 appear in Slurm's configuration file, slurm.conf. For example,
447 a sort value of "+P,-m" requests that records be printed in or‐
448 der of increasing partition name and within a partition by de‐
449 creasing memory size. The default value of sort is "#P,-t"
450 (partitions ordered as configured then decreasing node state).
451 If the --Node option is selected, the default sort value is "N"
452 (increasing node name).
453 -t, --states=<states>
455 List nodes only having the given state(s). Multiple states may
456 be comma separated and the comparison is case insensitive. If
457 the states are separated by '&', then the nodes must be in all
458 states. Possible values include (case insensitive): ALLOC, AL‐
459 LOCATED, CLOUD, COMP, COMPLETING, DOWN, DRAIN (for node in
460 DRAINING or DRAINED states), DRAINED, DRAINING, FAIL, FUTURE,
461 FUTR, IDLE, MAINT, MIX, MIXED, NO_RESPOND, NPC, PERFCTRS,
462 PLANNED, POWER_DOWN, POWERING_DOWN, POWERED_DOWN, POWERING_UP,
463 REBOOT_ISSUED, REBOOT_REQUESTED, RESV, RESERVED, UNK, and UN‐
464 KNOWN. By default nodes in the specified state are reported
465 whether they are responding or not. The --dead and --responding
466 options may be used to filter nodes by the corresponding flag.
467 -s, --summarize
469 List only a partition state summary with no node state details.
470 This is ignored if the --format option is specified.
471 --usage
473 Print a brief message listing the sinfo options.
474 -v, --verbose
476 Provide detailed event logging through program execution.
477 -V, --version
479 Print version information and exit.
480 --yaml Dump node information as YAML. All other formatting and filter‐
482 ing arguments will be ignored.
483
485 AVAIL Partition state. Can be either up, down, drain, or inact (for
486 INACTIVE). See the partition definition's State parameter in the
487 slurm.conf(5) man page for more information.
488 CPUS Count of CPUs (processors) on these nodes.
490 S:C:T Count of sockets (S), cores (C), and threads (T) on these nodes.
492 SOCKETS
494 Count of sockets on these nodes.
495 CORES Count of cores on these nodes.
497 THREADS
499 Count of threads on these nodes.
500 GROUPS Resource allocations in this partition are restricted to the
502 named groups. all indicates that all groups may use this parti‐
503 tion.
504 JOB_SIZE
506 Minimum and maximum node count that can be allocated to any user
507 job. A single number indicates the minimum and maximum node
508 count are the same. infinite is used to identify partitions
509 without a maximum node count.
510 TIMELIMIT
512 Maximum time limit for any user job in days-hours:minutes:sec‐
513 onds. infinite is used to identify partitions without a job
514 time limit.
515 MEMORY Size of real memory in megabytes on these nodes.
517 NODELIST
519 Names of nodes associated with this particular configuration.
520 NODES Count of nodes with this particular configuration.
522 NODES(A/I)
524 Count of nodes with this particular configuration by node state
525 in the form "allocated/idle".
526 NODES(A/I/O/T)
528 Count of nodes with this particular configuration by node state
529 in the form "allocated/idle/other/total".
530 PARTITION
532 Name of a partition. Note that the suffix "*" identifies the
533 default partition.
534 PORT Local TCP port used by slurmd on the node.
536 ROOT Is the ability to allocate resources in this partition re‐
538 stricted to user root, yes or no.
539 OVERSUBSCRIBE
541 Whether jobs allocated resources in this partition can/will
542 oversubscribe those compute resources (e.g. CPUs). NO indicates
543 resources are never oversubscribed. EXCLUSIVE indicates whole
544 nodes are dedicated to jobs (equivalent to srun --exclusive op‐
545 tion, may be used even with select/cons_res managing individual
546 processors). FORCE indicates resources are always available to
547 be oversubscribed. YES indicates resource may be oversub‐
548 scribed, if requested by the job's resource allocation.
549 NOTE: If OverSubscribe is set to FORCE or YES, the OversubScribe
551 value will be appended to the output.
552 STATE State of the nodes. Possible states include: allocated, com‐
554 pleting, down, drained, draining, fail, failing, future, idle,
555 maint, mixed, perfctrs, planned, power_down, power_up, reserved,
556 and unknown. Their abbreviated forms are: alloc, comp, down,
557 drain, drng, fail, failg, futr, idle, maint, mix, npc, plnd,
558 pow_dn, pow_up, resv, and unk respectively.
559 NOTE: The suffix "*" identifies nodes that are presently not re‐
561 sponding.
562 TMP_DISK
564 Size of temporary disk space in megabytes on these nodes.
565
567 Node state codes are shortened as required for the field size. These
568 node states may be followed by a special character to identify state
569 flags associated with the node. The following node suffixes and states
570 are used:
571 * The node is presently not responding and will not be allocated any
574 new work. If the node remains non-responsive, it will be placed in
575 the DOWN state (except in the case of COMPLETING, DRAINED, DRAIN‐
576 ING, FAIL, FAILING nodes).
577 ~ The node is presently in powered off.
579 # The node is presently being powered up or configured.
581 ! The node is pending power down.
583 % The node is presently being powered down.
585 $ The node is currently in a reservation with a flag value of "main‐
587 tenance".
588 @ The node is pending reboot.
590 ^ The node reboot was issued.
592 - The node is planned by the backfill scheduler for a higher priority
594 job.
595 ALLOCATED The node has been allocated to one or more jobs.
597 ALLOCATED+ The node is allocated to one or more active jobs plus one
599 or more jobs are in the process of COMPLETING.
600 COMPLETING All jobs associated with this node are in the process of
602 COMPLETING. This node state will be removed when all of
603 the job's processes have terminated and the Slurm epilog
604 program (if any) has terminated. See the Epilog parameter
605 description in the slurm.conf(5) man page for more informa‐
606 tion.
607 DOWN The node is unavailable for use. Slurm can automatically
609 place nodes in this state if some failure occurs. System
610 administrators may also explicitly place nodes in this
611 state. If a node resumes normal operation, Slurm can auto‐
612 matically return it to service. See the ReturnToService and
613 SlurmdTimeout parameter descriptions in the slurm.conf(5)
614 man page for more information.
615 DRAINED The node is unavailable for use per system administrator
617 request. See the update node command in the scontrol(1)
618 man page or the slurm.conf(5) man page for more informa‐
619 tion.
620 DRAINING The node is currently executing a job, but will not be al‐
622 located additional jobs. The node state will be changed to
623 state DRAINED when the last job on it completes. Nodes en‐
624 ter this state per system administrator request. See the
625 update node command in the scontrol(1) man page or the
626 slurm.conf(5) man page for more information.
627 FAIL The node is expected to fail soon and is unavailable for
629 use per system administrator request. See the update node
630 command in the scontrol(1) man page or the slurm.conf(5)
631 man page for more information.
632 FAILING The node is currently executing a job, but is expected to
634 fail soon and is unavailable for use per system administra‐
635 tor request. See the update node command in the scon‐
636 trol(1) man page or the slurm.conf(5) man page for more in‐
637 formation.
638 FUTURE The node is currently not fully configured, but expected to
640 be available at some point in the indefinite future for
641 use.
642 IDLE The node is not allocated to any jobs and is available for
644 use.
645 INVAL The node did not register correctly with the controller.
647 This happens when a node registers with less resources than
648 configured in the slurm.conf file. The node will clear
649 from this state with a valid registration (i.e. a slurmd
650 restart is required).
651 MAINT The node is currently in a reservation with a flag value of
653 "maintenance".
654 REBOOT_ISSUED
656 A reboot request has been sent to the agent configured to
657 handle this request.
658 REBOOT_REQUESTED
660 A request to reboot this node has been made, but hasn't
661 been handled yet.
662 MIXED The node has some of its CPUs ALLOCATED while others are
664 IDLE.
665 PERFCTRS (NPC)
667 Network Performance Counters associated with this node are
668 in use, rendering this node as not usable for any other
669 jobs
670 PLANNED The node is planned by the backfill scheduler for a higher
672 priority job.
673 POWER_DOWN The node is pending power down.
675 POWERED_DOWN
677 The node is currently powered down and not capable of run‐
678 ning any jobs.
679 POWERING_DOWN
681 The node is in the process of powering down and not capable
682 of running any jobs.
683 POWERING_UP The node is in the process of being powered up.
685 RESERVED The node is in an advanced reservation and not generally
687 available.
688 UNKNOWN The Slurm controller has just started and the node's state
690 has not yet been determined.
691
693 Executing sinfo sends a remote procedure call to slurmctld. If enough
694 calls from sinfo or other Slurm client commands that send remote proce‐
695 dure calls to the slurmctld daemon come in at once, it can result in a
696 degradation of performance of the slurmctld daemon, possibly resulting
697 in a denial of service.
698 Do not run sinfo or other Slurm client commands that send remote proce‐
700 dure calls to slurmctld from loops in shell scripts or other programs.
701 Ensure that programs limit calls to sinfo to the minimum necessary for
702 the information you are trying to gather.
703
706 Some sinfo options may be set via environment variables. These environ‐
707 ment variables, along with their corresponding options, are listed be‐
708 low. NOTE: Command line options will always override these settings.
709 SINFO_ALL Same as -a, --all
712 SINFO_FEDERATION Same as --federation
714 SINFO_FORMAT Same as -o <output_format>, --format=<output_for‐
716 mat>
717 SINFO_LOCAL Same as --local
719 SINFO_PARTITION Same as -p <partition>, --partition=<partition>
721 SINFO_SORT Same as -S <sort>, --sort=<sort>
723 SLURM_CLUSTERS Same as --clusters
725 SLURM_CONF The location of the Slurm configuration file.
727 SLURM_TIME_FORMAT Specify the format used to report time stamps. A
729 value of standard, the default value, generates
730 output in the form
731 "year-month-dateThour:minute:second". A value of
732 relative returns only "hour:minute:second" if the
733 current day. For other dates in the current year
734 it prints the "hour:minute" preceded by "Tomorr"
735 (tomorrow), "Ystday" (yesterday), the name of the
736 day for the coming week (e.g. "Mon", "Tue", etc.),
737 otherwise the date (e.g. "25 Apr"). For other
738 years it returns a date month and year without a
739 time (e.g. "6 Jun 2012"). All of the time stamps
740 use a 24 hour format.
741 A valid strftime() format can also be specified.
743 For example, a value of "%a %T" will report the day
744 of the week and a time stamp (e.g. "Mon 12:34:56").
745
747 Report basic node and partition configurations:
748 $ sinfo
750 PARTITION AVAIL TIMELIMIT NODES STATE NODELIST
751 batch up infinite 2 alloc adev[8-9]
752 batch up infinite 6 idle adev[10-15]
753 debug* up 30:00 8 idle adev[0-7]
754 Report partition summary information:
757 $ sinfo -s
759 PARTITION AVAIL TIMELIMIT NODES(A/I/O/T) NODELIST
760 batch up infinite 2/6/0/8 adev[8-15]
761 debug* up 30:00 0/8/0/8 adev[0-7]
762 Report more complete information about the partition debug:
765 $ sinfo --long --partition=debug
767 PARTITION AVAIL TIMELIMIT JOB_SIZE ROOT OVERSUBS GROUPS NODES STATE NODELIST
768 debug* up 30:00 8 no no all 8 idle dev[0-7]
769 Report only those nodes that are in state DRAINED:
772 $ sinfo --states=drained
774 PARTITION AVAIL NODES TIMELIMIT STATE NODELIST
775 debug* up 2 30:00 drain adev[6-7]
776 Report node-oriented information with details and exact matches:
779 $ sinfo -Nel
781 NODELIST NODES PARTITION STATE CPUS MEMORY TMP_DISK WEIGHT FEATURES REASON
782 adev[0-1] 2 debug* idle 2 3448 38536 16 (null) (null)
783 adev[2,4-7] 5 debug* idle 2 3384 38536 16 (null) (null)
784 adev3 1 debug* idle 2 3394 38536 16 (null) (null)
785 adev[8-9] 2 batch allocated 2 246 82306 16 (null) (null)
786 adev[10-15] 6 batch idle 2 246 82306 16 (null) (null)
787 Report only down, drained and draining nodes and their reason field:
790 $ sinfo -R
792 REASON NODELIST
793 Memory errors dev[0,5]
794 Not Responding dev8
795
798 Copyright (C) 2002-2007 The Regents of the University of California.
799 Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
800 Copyright (C) 2008-2009 Lawrence Livermore National Security.
801 Copyright (C) 2010-2022 SchedMD LLC.
802 This file is part of Slurm, a resource management program. For de‐
804 tails, see <https://slurm.schedmd.com/>.
805 Slurm is free software; you can redistribute it and/or modify it under
807 the terms of the GNU General Public License as published by the Free
808 Software Foundation; either version 2 of the License, or (at your op‐
809 tion) any later version.
810 Slurm is distributed in the hope that it will be useful, but WITHOUT
812 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
813 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
814 for more details.
815
818 scontrol(1), squeue(1), slurm_load_ctl_conf (3), slurm_load_jobs (3),
819 slurm_load_node (3), slurm_load_partitions (3), slurm_reconfigure [22m(3),
820 slurm_shutdown [22m(3), slurm_update_job [22m(3), slurm_update_node [22m(3),
821 slurm_update_partition (3), slurm.conf(5)
822March 2022 Slurm Commands sinfo(1)