1trace6(8)                            IPv6                            trace6(8)
2
3
4

NAME

6       trace6
7
8

SYNOPSIS

10       trace6 [-abdtu] [-s src6] interface targetaddress [port]
11
12

OPTIONS

14         -a       insert a hop-by-hop header with router alert option.
15         -D       insert a destination extension header
16         -E       insert a destination extension header with an invalid option
17         -F       insert a one-shot fragmentation header
18         -b       instead of an ICMP6 Ping, use TooBig (you will not see the target)
19         -B       instead of an ICMP6 Ping, use PingReply (you will not see the target)
20         -d       resolves the IPv6 addresses to DNS.
21         -t       enables tunnel detection
22         -u       use UDP instead of TCP if a port is supplied
23         -r       raw mode (for adapters networks that have no ethernet)
24         -s src6  specifies the source IPv6 address
25       Maximum hop reach: 31
26
27       A basic but very fast traceroute6 program.
28       If no port is specified, ICMP6 Ping requests are used, otherwise TCP SYN
29       packets to the specified port. Options D, E and F can be use multiple times.
30

AUTHOR

32       thc-ipv6 was written by van Hauser <vh@thc.org> / THC
33
34       The homepage for this toolkit is: https://github.com/vanhauser-thc/thc-
35       ipv6
36
37

39       trace6   3.8   (c)   2020   by   van   Hauser   /   THC    <vh@thc.org>
40       www.github.com/vanhauser-thc/thc-ipv6
41
42
43
44THC                               2022-06-18                         trace6(8)
Impressum