1cgconfig_selinux(8) SELinux Policy cgconfig cgconfig_selinux(8)
2
6 cgconfig_selinux - Security Enhanced Linux Policy for the cgconfig pro‐
7 cesses
8
10 Security-Enhanced Linux secures the cgconfig processes via flexible
11 mandatory access control.
12 The cgconfig processes execute with the cgconfig_t SELinux type. You
14 can check if you have these processes running by executing the ps com‐
15 mand with the -Z qualifier.
16 For example:
18 ps -eZ | grep cgconfig_t
20
24 The cgconfig_t SELinux type can be entered via the cgconfig_exec_t file
25 type.
26 The default entrypoint paths for the cgconfig_t domain are the follow‐
28 ing:
29 /sbin/cgconfigparser, /usr/sbin/cgconfigparser
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 cgconfig policy is very flexible allowing users to setup their cgconfig
40 processes in as secure a method as possible.
41 The following process types are defined for cgconfig:
43 cgconfig_t
45 Note: semanage permissive -a cgconfig_t can be used to make the process
47 type cgconfig_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
53 SELinux policy is customizable based on least access required. cgcon‐
54 fig policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run cgconfig with the tightest access
56 possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to allow system to run with NIS, you must turn on the
68 nis_enabled boolean. Disabled by default.
69 setsebool -P nis_enabled 1
71
75 The SELinux process type cgconfig_t can manage files labeled with the
76 following file types. The paths listed are the default paths for these
77 file types. Note the processes UID still need to have DAC permissions.
78 cluster_conf_t
80 /etc/cluster(/.*)?
82 cluster_var_lib_t
84 /var/lib/pcsd(/.*)?
86 /var/lib/cluster(/.*)?
87 /var/lib/openais(/.*)?
88 /var/lib/pengine(/.*)?
89 /var/lib/corosync(/.*)?
90 /usr/lib/heartbeat(/.*)?
91 /var/lib/heartbeat(/.*)?
92 /var/lib/pacemaker(/.*)?
93 cluster_var_run_t
95 /var/run/crm(/.*)?
97 /var/run/cman_.*
98 /var/run/rsctmp(/.*)?
99 /var/run/aisexec.*
100 /var/run/heartbeat(/.*)?
101 /var/run/pcsd-ruby.socket
102 /var/run/corosync-qnetd(/.*)?
103 /var/run/corosync-qdevice(/.*)?
104 /var/run/corosync.pid
105 /var/run/cpglockd.pid
106 /var/run/rgmanager.pid
107 /var/run/cluster/rgmanager.sk
108 krb5_host_rcache_t
110 /var/tmp/krb5_0.rcache2
112 /var/cache/krb5rcache(/.*)?
113 /var/tmp/nfs_0
114 /var/tmp/DNS_25
115 /var/tmp/host_0
116 /var/tmp/imap_0
117 /var/tmp/HTTP_23
118 /var/tmp/HTTP_48
119 /var/tmp/ldap_55
120 /var/tmp/ldap_487
121 /var/tmp/ldapmap1_0
122 root_t
124 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
126 /
127 /initrd
128
131 SELinux requires files to have an extended attribute to define the file
132 type.
133 You can see the context of a file using the -Z option to ls
135 Policy governs the access confined processes have to these files.
137 SELinux cgconfig policy is very flexible allowing users to setup their
138 cgconfig processes in as secure a method as possible.
139 STANDARD FILE CONTEXT
141 SELinux defines the file context types for the cgconfig, if you wanted
143 to store files with these types in a diffent paths, you need to execute
144 the semanage command to specify alternate labeling and then use re‐
145 storecon to put the labels on disk.
146 semanage fcontext -a -t cgconfig_etc_t '/srv/mycgconfig_content(/.*)?'
148 restorecon -R -v /srv/mycgconfig_content
149 Note: SELinux often uses regular expressions to specify labels that
151 match multiple files.
152 The following file types are defined for cgconfig:
154 cgconfig_etc_t
158 - Set files with the cgconfig_etc_t type, if you want to store cgconfig
160 files in the /etc directories.
161 Paths:
164 /etc/cgconfig.conf, /etc/sysconfig/cgconfig
165 cgconfig_exec_t
168 - Set files with the cgconfig_exec_t type, if you want to transition an
170 executable to the cgconfig_t domain.
171 Paths:
174 /sbin/cgconfigparser, /usr/sbin/cgconfigparser
175 cgconfig_initrc_exec_t
178 - Set files with the cgconfig_initrc_exec_t type, if you want to tran‐
180 sition an executable to the cgconfig_initrc_t domain.
181 Note: File context can be temporarily modified with the chcon command.
185 If you want to permanently change the file context you need to use the
186 semanage fcontext command. This will modify the SELinux labeling data‐
187 base. You will need to use restorecon to apply the labels.
188
191 semanage fcontext can also be used to manipulate default file context
192 mappings.
193 semanage permissive can also be used to manipulate whether or not a
195 process type is permissive.
196 semanage module can also be used to enable/disable/install/remove pol‐
198 icy modules.
199 semanage boolean can also be used to manipulate the booleans
201 system-config-selinux is a GUI tool available to customize SELinux pol‐
204 icy settings.
205
208 This manual page was auto-generated using sepolicy manpage .
209
212 selinux(8), cgconfig(8), semanage(8), restorecon(8), chcon(1), sepol‐
213 icy(8), setsebool(8)
214cgconfig 23-02-03 cgconfig_selinux(8)