1dccifd_selinux(8)            SELinux Policy dccifd           dccifd_selinux(8)
2
3
4

NAME

6       dccifd_selinux  -  Security  Enhanced  Linux Policy for the dccifd pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux  secures  the  dccifd  processes  via  flexible
11       mandatory access control.
12
13       The  dccifd  processes  execute with the dccifd_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep dccifd_t
20
21
22

ENTRYPOINTS

24       The  dccifd_t  SELinux  type  can be entered via the dccifd_exec_t file
25       type.
26
27       The default entrypoint paths for the dccifd_t domain are the following:
28
29       /usr/sbin/dccifd,  /usr/libexec/dcc/dccifd,  /usr/libexec/dcc/start-dc‐
30       cifd
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       dccifd  policy  is  very  flexible allowing users to setup their dccifd
40       processes in as secure a method as possible.
41
42       The following process types are defined for dccifd:
43
44       dccifd_t
45
46       Note: semanage permissive -a dccifd_t can be used to make  the  process
47       type  dccifd_t  permissive.  SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux  policy is customizable based on least access required.  dccifd
54       policy is extremely flexible and has several booleans that allow you to
55       manipulate the policy and run dccifd with the tightest access possible.
56
57
58
59       If you want to allow all domains to execute in fips_mode, you must turn
60       on the fips_mode boolean. Enabled by default.
61
62       setsebool -P fips_mode 1
63
64
65
66       If you want to allow system to run with  NIS,  you  must  turn  on  the
67       nis_enabled boolean. Disabled by default.
68
69       setsebool -P nis_enabled 1
70
71
72

MANAGED FILES

74       The  SELinux  process  type  dccifd_t can manage files labeled with the
75       following file types.  The paths listed are the default paths for these
76       file types.  Note the processes UID still need to have DAC permissions.
77
78       cluster_conf_t
79
80            /etc/cluster(/.*)?
81
82       cluster_var_lib_t
83
84            /var/lib/pcsd(/.*)?
85            /var/lib/cluster(/.*)?
86            /var/lib/openais(/.*)?
87            /var/lib/pengine(/.*)?
88            /var/lib/corosync(/.*)?
89            /usr/lib/heartbeat(/.*)?
90            /var/lib/heartbeat(/.*)?
91            /var/lib/pacemaker(/.*)?
92
93       cluster_var_run_t
94
95            /var/run/crm(/.*)?
96            /var/run/cman_.*
97            /var/run/rsctmp(/.*)?
98            /var/run/aisexec.*
99            /var/run/heartbeat(/.*)?
100            /var/run/pcsd-ruby.socket
101            /var/run/corosync-qnetd(/.*)?
102            /var/run/corosync-qdevice(/.*)?
103            /var/run/corosync.pid
104            /var/run/cpglockd.pid
105            /var/run/rgmanager.pid
106            /var/run/cluster/rgmanager.sk
107
108       dcc_client_map_t
109
110            /etc/dcc/map
111            /var/dcc/map
112            /var/lib/dcc/map
113            /var/run/dcc/map
114
115       dcc_var_t
116
117            /etc/dcc(/.*)?
118            /var/dcc(/.*)?
119            /var/lib/dcc(/.*)?
120
121       dccifd_tmp_t
122
123
124       dccifd_var_run_t
125
126            /etc/dcc/dccifd
127            /var/run/dcc/dccifd
128
129       krb5_host_rcache_t
130
131            /var/tmp/krb5_0.rcache2
132            /var/cache/krb5rcache(/.*)?
133            /var/tmp/nfs_0
134            /var/tmp/DNS_25
135            /var/tmp/host_0
136            /var/tmp/imap_0
137            /var/tmp/HTTP_23
138            /var/tmp/HTTP_48
139            /var/tmp/ldap_55
140            /var/tmp/ldap_487
141            /var/tmp/ldapmap1_0
142
143       root_t
144
145            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
146            /
147            /initrd
148
149

FILE CONTEXTS

151       SELinux requires files to have an extended attribute to define the file
152       type.
153
154       You can see the context of a file using the -Z option to ls
155
156       Policy governs the access  confined  processes  have  to  these  files.
157       SELinux  dccifd  policy  is very flexible allowing users to setup their
158       dccifd processes in as secure a method as possible.
159
160       STANDARD FILE CONTEXT
161
162       SELinux defines the file context types for the dccifd, if you wanted to
163       store  files  with  these types in a diffent paths, you need to execute
164       the semanage command to specify alternate labeling  and  then  use  re‐
165       storecon to put the labels on disk.
166
167       semanage fcontext -a -t dccifd_var_run_t '/srv/mydccifd_content(/.*)?'
168       restorecon -R -v /srv/mydccifd_content
169
170       Note:  SELinux  often  uses  regular expressions to specify labels that
171       match multiple files.
172
173       The following file types are defined for dccifd:
174
175
176
177       dccifd_exec_t
178
179       - Set files with the dccifd_exec_t type, if you want to  transition  an
180       executable to the dccifd_t domain.
181
182
183       Paths:
184            /usr/sbin/dccifd, /usr/libexec/dcc/dccifd, /usr/libexec/dcc/start-
185            dccifd
186
187
188       dccifd_tmp_t
189
190       - Set files with the dccifd_tmp_t type, if you  want  to  store  dccifd
191       temporary files in the /tmp directories.
192
193
194
195       dccifd_var_run_t
196
197       -  Set  files  with the dccifd_var_run_t type, if you want to store the
198       dccifd files under the /run or /var/run directory.
199
200
201       Paths:
202            /etc/dcc/dccifd, /var/run/dcc/dccifd
203
204
205       Note: File context can be temporarily modified with the chcon  command.
206       If  you want to permanently change the file context you need to use the
207       semanage fcontext command.  This will modify the SELinux labeling data‐
208       base.  You will need to use restorecon to apply the labels.
209
210

COMMANDS

212       semanage  fcontext  can also be used to manipulate default file context
213       mappings.
214
215       semanage permissive can also be used to manipulate  whether  or  not  a
216       process type is permissive.
217
218       semanage  module can also be used to enable/disable/install/remove pol‐
219       icy modules.
220
221       semanage boolean can also be used to manipulate the booleans
222
223
224       system-config-selinux is a GUI tool available to customize SELinux pol‐
225       icy settings.
226
227

AUTHOR

229       This manual page was auto-generated using sepolicy manpage .
230
231

SEE ALSO

233       selinux(8),  dccifd(8),  semanage(8),  restorecon(8),  chcon(1), sepol‐
234       icy(8), setsebool(8)
235
236
237
238dccifd                             23-02-03                  dccifd_selinux(8)
Impressum