1groupd_selinux(8) SELinux Policy groupd groupd_selinux(8)
2
6 groupd_selinux - Security Enhanced Linux Policy for the groupd pro‐
7 cesses
8
10 Security-Enhanced Linux secures the groupd processes via flexible
11 mandatory access control.
12 The groupd processes execute with the groupd_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16 For example:
18 ps -eZ | grep groupd_t
20
24 The groupd_t SELinux type can be entered via the groupd_exec_t file
25 type.
26 The default entrypoint paths for the groupd_t domain are the following:
28 /usr/sbin/groupd
30
32 SELinux defines process types (domains) for each process running on the
33 system
34 You can see the context of a process using the -Z option to ps
36 Policy governs the access confined processes have to files. SELinux
38 groupd policy is very flexible allowing users to setup their groupd
39 processes in as secure a method as possible.
40 The following process types are defined for groupd:
42 groupd_t
44 Note: semanage permissive -a groupd_t can be used to make the process
46 type groupd_t permissive. SELinux does not deny access to permissive
47 process types, but the AVC (SELinux denials) messages are still gener‐
48 ated.
49
52 SELinux policy is customizable based on least access required. groupd
53 policy is extremely flexible and has several booleans that allow you to
54 manipulate the policy and run groupd with the tightest access possible.
55 If you want to allow cluster administrative cluster domains memcheck-
59 amd64- to use executable memory, you must turn on the cluster_use_ex‐
60 ecmem boolean. Disabled by default.
61 setsebool -P cluster_use_execmem 1
63 If you want to allow all domains to execute in fips_mode, you must turn
67 on the fips_mode boolean. Enabled by default.
68 setsebool -P fips_mode 1
70 If you want to allow system to run with NIS, you must turn on the
74 nis_enabled boolean. Disabled by default.
75 setsebool -P nis_enabled 1
77
81 The SELinux process type groupd_t can manage files labeled with the
82 following file types. The paths listed are the default paths for these
83 file types. Note the processes UID still need to have DAC permissions.
84 cluster_conf_t
86 /etc/cluster(/.*)?
88 cluster_log
90 cluster_var_lib_t
93 /var/lib/pcsd(/.*)?
95 /var/lib/cluster(/.*)?
96 /var/lib/openais(/.*)?
97 /var/lib/pengine(/.*)?
98 /var/lib/corosync(/.*)?
99 /usr/lib/heartbeat(/.*)?
100 /var/lib/heartbeat(/.*)?
101 /var/lib/pacemaker(/.*)?
102 cluster_var_run_t
104 /var/run/crm(/.*)?
106 /var/run/cman_.*
107 /var/run/rsctmp(/.*)?
108 /var/run/aisexec.*
109 /var/run/heartbeat(/.*)?
110 /var/run/pcsd-ruby.socket
111 /var/run/corosync-qnetd(/.*)?
112 /var/run/corosync-qdevice(/.*)?
113 /var/run/corosync.pid
114 /var/run/cpglockd.pid
115 /var/run/rgmanager.pid
116 /var/run/cluster/rgmanager.sk
117 groupd_tmpfs_t
119 groupd_var_run_t
122 /var/run/groupd.pid
124 krb5_host_rcache_t
126 /var/tmp/krb5_0.rcache2
128 /var/cache/krb5rcache(/.*)?
129 /var/tmp/nfs_0
130 /var/tmp/DNS_25
131 /var/tmp/host_0
132 /var/tmp/imap_0
133 /var/tmp/HTTP_23
134 /var/tmp/HTTP_48
135 /var/tmp/ldap_55
136 /var/tmp/ldap_487
137 /var/tmp/ldapmap1_0
138 root_t
140 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
142 /
143 /initrd
144
147 SELinux requires files to have an extended attribute to define the file
148 type.
149 You can see the context of a file using the -Z option to ls
151 Policy governs the access confined processes have to these files.
153 SELinux groupd policy is very flexible allowing users to setup their
154 groupd processes in as secure a method as possible.
155 STANDARD FILE CONTEXT
157 SELinux defines the file context types for the groupd, if you wanted to
159 store files with these types in a diffent paths, you need to execute
160 the semanage command to specify alternate labeling and then use re‐
161 storecon to put the labels on disk.
162 semanage fcontext -a -t groupd_var_run_t '/srv/mygroupd_content(/.*)?'
164 restorecon -R -v /srv/mygroupd_content
165 Note: SELinux often uses regular expressions to specify labels that
167 match multiple files.
168 The following file types are defined for groupd:
170 groupd_exec_t
174 - Set files with the groupd_exec_t type, if you want to transition an
176 executable to the groupd_t domain.
177 groupd_tmpfs_t
181 - Set files with the groupd_tmpfs_t type, if you want to store groupd
183 files on a tmpfs file system.
184 groupd_var_log_t
188 - Set files with the groupd_var_log_t type, if you want to treat the
190 data as groupd var log data, usually stored under the /var/log direc‐
191 tory.
192 groupd_var_run_t
196 - Set files with the groupd_var_run_t type, if you want to store the
198 groupd files under the /run or /var/run directory.
199 Note: File context can be temporarily modified with the chcon command.
203 If you want to permanently change the file context you need to use the
204 semanage fcontext command. This will modify the SELinux labeling data‐
205 base. You will need to use restorecon to apply the labels.
206
209 semanage fcontext can also be used to manipulate default file context
210 mappings.
211 semanage permissive can also be used to manipulate whether or not a
213 process type is permissive.
214 semanage module can also be used to enable/disable/install/remove pol‐
216 icy modules.
217 semanage boolean can also be used to manipulate the booleans
219 system-config-selinux is a GUI tool available to customize SELinux pol‐
222 icy settings.
223
226 This manual page was auto-generated using sepolicy manpage .
227
230 selinux(8), groupd(8), semanage(8), restorecon(8), chcon(1), sepol‐
231 icy(8), setsebool(8)
232groupd 23-02-03 groupd_selinux(8)