1pptp_selinux(8) SELinux Policy pptp pptp_selinux(8)
2
3
4
6 pptp_selinux - Security Enhanced Linux Policy for the pptp processes
7
9 Security-Enhanced Linux secures the pptp processes via flexible manda‐
10 tory access control.
11
12 The pptp processes execute with the pptp_t SELinux type. You can check
13 if you have these processes running by executing the ps command with
14 the -Z qualifier.
15
16 For example:
17
18 ps -eZ | grep pptp_t
19
20
21
23 The pptp_t SELinux type can be entered via the pptp_exec_t file type.
24
25 The default entrypoint paths for the pptp_t domain are the following:
26
27 /usr/sbin/pptp
28
30 SELinux defines process types (domains) for each process running on the
31 system
32
33 You can see the context of a process using the -Z option to ps
34
35 Policy governs the access confined processes have to files. SELinux
36 pptp policy is very flexible allowing users to setup their pptp pro‐
37 cesses in as secure a method as possible.
38
39 The following process types are defined for pptp:
40
41 pptp_t
42
43 Note: semanage permissive -a pptp_t can be used to make the process
44 type pptp_t permissive. SELinux does not deny access to permissive
45 process types, but the AVC (SELinux denials) messages are still gener‐
46 ated.
47
48
50 SELinux policy is customizable based on least access required. pptp
51 policy is extremely flexible and has several booleans that allow you to
52 manipulate the policy and run pptp with the tightest access possible.
53
54
55
56 If you want to allow all domains to execute in fips_mode, you must turn
57 on the fips_mode boolean. Enabled by default.
58
59 setsebool -P fips_mode 1
60
61
62
63 If you want to allow system to run with NIS, you must turn on the
64 nis_enabled boolean. Disabled by default.
65
66 setsebool -P nis_enabled 1
67
68
69
71 SELinux defines port types to represent TCP and UDP ports.
72
73 You can see the types associated with a port by using the following
74 command:
75
76 semanage port -l
77
78
79 Policy governs the access confined processes have to these ports.
80 SELinux pptp policy is very flexible allowing users to setup their pptp
81 processes in as secure a method as possible.
82
83 The following port types are defined for pptp:
84
85
86 pptp_port_t
87
88
89
90 Default Defined Ports:
91 tcp 1723
92 udp 1723
93
95 The SELinux process type pptp_t can manage files labeled with the fol‐
96 lowing file types. The paths listed are the default paths for these
97 file types. Note the processes UID still need to have DAC permissions.
98
99 cluster_conf_t
100
101 /etc/cluster(/.*)?
102
103 cluster_var_lib_t
104
105 /var/lib/pcsd(/.*)?
106 /var/lib/cluster(/.*)?
107 /var/lib/openais(/.*)?
108 /var/lib/pengine(/.*)?
109 /var/lib/corosync(/.*)?
110 /usr/lib/heartbeat(/.*)?
111 /var/lib/heartbeat(/.*)?
112 /var/lib/pacemaker(/.*)?
113
114 cluster_var_run_t
115
116 /var/run/crm(/.*)?
117 /var/run/cman_.*
118 /var/run/rsctmp(/.*)?
119 /var/run/aisexec.*
120 /var/run/heartbeat(/.*)?
121 /var/run/pcsd-ruby.socket
122 /var/run/corosync-qnetd(/.*)?
123 /var/run/corosync-qdevice(/.*)?
124 /var/run/corosync.pid
125 /var/run/cpglockd.pid
126 /var/run/rgmanager.pid
127 /var/run/cluster/rgmanager.sk
128
129 krb5_host_rcache_t
130
131 /var/tmp/krb5_0.rcache2
132 /var/cache/krb5rcache(/.*)?
133 /var/tmp/nfs_0
134 /var/tmp/DNS_25
135 /var/tmp/host_0
136 /var/tmp/imap_0
137 /var/tmp/HTTP_23
138 /var/tmp/HTTP_48
139 /var/tmp/ldap_55
140 /var/tmp/ldap_487
141 /var/tmp/ldapmap1_0
142
143 pptp_log_t
144
145
146 pptp_var_run_t
147
148 /var/run/pptp(/.*)?
149
150 root_t
151
152 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
153 /
154 /initrd
155
156
158 SELinux requires files to have an extended attribute to define the file
159 type.
160
161 You can see the context of a file using the -Z option to ls
162
163 Policy governs the access confined processes have to these files.
164 SELinux pptp policy is very flexible allowing users to setup their pptp
165 processes in as secure a method as possible.
166
167 STANDARD FILE CONTEXT
168
169 SELinux defines the file context types for the pptp, if you wanted to
170 store files with these types in a diffent paths, you need to execute
171 the semanage command to specify alternate labeling and then use re‐
172 storecon to put the labels on disk.
173
174 semanage fcontext -a -t pptp_var_run_t '/srv/mypptp_content(/.*)?'
175 restorecon -R -v /srv/mypptp_content
176
177 Note: SELinux often uses regular expressions to specify labels that
178 match multiple files.
179
180 The following file types are defined for pptp:
181
182
183
184 pptp_exec_t
185
186 - Set files with the pptp_exec_t type, if you want to transition an ex‐
187 ecutable to the pptp_t domain.
188
189
190
191 pptp_log_t
192
193 - Set files with the pptp_log_t type, if you want to treat the data as
194 pptp log data, usually stored under the /var/log directory.
195
196
197
198 pptp_var_run_t
199
200 - Set files with the pptp_var_run_t type, if you want to store the pptp
201 files under the /run or /var/run directory.
202
203
204
205 Note: File context can be temporarily modified with the chcon command.
206 If you want to permanently change the file context you need to use the
207 semanage fcontext command. This will modify the SELinux labeling data‐
208 base. You will need to use restorecon to apply the labels.
209
210
212 semanage fcontext can also be used to manipulate default file context
213 mappings.
214
215 semanage permissive can also be used to manipulate whether or not a
216 process type is permissive.
217
218 semanage module can also be used to enable/disable/install/remove pol‐
219 icy modules.
220
221 semanage port can also be used to manipulate the port definitions
222
223 semanage boolean can also be used to manipulate the booleans
224
225
226 system-config-selinux is a GUI tool available to customize SELinux pol‐
227 icy settings.
228
229
231 This manual page was auto-generated using sepolicy manpage .
232
233
235 selinux(8), pptp(8), semanage(8), restorecon(8), chcon(1), sepolicy(8),
236 setsebool(8)
237
238
239
240pptp 23-02-03 pptp_selinux(8)