1radvd_selinux(8)             SELinux Policy radvd             radvd_selinux(8)
2
3
4

NAME

6       radvd_selinux - Security Enhanced Linux Policy for the radvd processes
7

DESCRIPTION

9       Security-Enhanced Linux secures the radvd processes via flexible manda‐
10       tory access control.
11
12       The radvd processes execute with the  radvd_t  SELinux  type.  You  can
13       check  if  you have these processes running by executing the ps command
14       with the -Z qualifier.
15
16       For example:
17
18       ps -eZ | grep radvd_t
19
20
21

ENTRYPOINTS

23       The radvd_t SELinux type can be entered via the radvd_exec_t file type.
24
25       The default entrypoint paths for the radvd_t domain are the following:
26
27       /usr/sbin/radvd
28

PROCESS TYPES

30       SELinux defines process types (domains) for each process running on the
31       system
32
33       You can see the context of a process using the -Z option to ps
34
35       Policy  governs  the  access confined processes have to files.  SELinux
36       radvd policy is very flexible allowing users to setup their radvd  pro‐
37       cesses in as secure a method as possible.
38
39       The following process types are defined for radvd:
40
41       radvd_t
42
43       Note:  semanage  permissive  -a radvd_t can be used to make the process
44       type radvd_t permissive. SELinux does not  deny  access  to  permissive
45       process  types, but the AVC (SELinux denials) messages are still gener‐
46       ated.
47
48

BOOLEANS

50       SELinux policy is customizable based on least access  required.   radvd
51       policy is extremely flexible and has several booleans that allow you to
52       manipulate the policy and run radvd with the tightest access possible.
53
54
55
56       If you want to allow all domains to execute in fips_mode, you must turn
57       on the fips_mode boolean. Enabled by default.
58
59       setsebool -P fips_mode 1
60
61
62

MANAGED FILES

64       The SELinux process type radvd_t can manage files labeled with the fol‐
65       lowing file types.  The paths listed are the default  paths  for  these
66       file types.  Note the processes UID still need to have DAC permissions.
67
68       cluster_conf_t
69
70            /etc/cluster(/.*)?
71
72       cluster_var_lib_t
73
74            /var/lib/pcsd(/.*)?
75            /var/lib/cluster(/.*)?
76            /var/lib/openais(/.*)?
77            /var/lib/pengine(/.*)?
78            /var/lib/corosync(/.*)?
79            /usr/lib/heartbeat(/.*)?
80            /var/lib/heartbeat(/.*)?
81            /var/lib/pacemaker(/.*)?
82
83       cluster_var_run_t
84
85            /var/run/crm(/.*)?
86            /var/run/cman_.*
87            /var/run/rsctmp(/.*)?
88            /var/run/aisexec.*
89            /var/run/heartbeat(/.*)?
90            /var/run/pcsd-ruby.socket
91            /var/run/corosync-qnetd(/.*)?
92            /var/run/corosync-qdevice(/.*)?
93            /var/run/corosync.pid
94            /var/run/cpglockd.pid
95            /var/run/rgmanager.pid
96            /var/run/cluster/rgmanager.sk
97
98       krb5_host_rcache_t
99
100            /var/tmp/krb5_0.rcache2
101            /var/cache/krb5rcache(/.*)?
102            /var/tmp/nfs_0
103            /var/tmp/DNS_25
104            /var/tmp/host_0
105            /var/tmp/imap_0
106            /var/tmp/HTTP_23
107            /var/tmp/HTTP_48
108            /var/tmp/ldap_55
109            /var/tmp/ldap_487
110            /var/tmp/ldapmap1_0
111
112       radvd_var_run_t
113
114            /var/run/radvd(/.*)?
115            /var/run/radvd.pid
116
117       root_t
118
119            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
120            /
121            /initrd
122
123

FILE CONTEXTS

125       SELinux requires files to have an extended attribute to define the file
126       type.
127
128       You can see the context of a file using the -Z option to ls
129
130       Policy governs the access  confined  processes  have  to  these  files.
131       SELinux  radvd  policy  is  very flexible allowing users to setup their
132       radvd processes in as secure a method as possible.
133
134       EQUIVALENCE DIRECTORIES
135
136
137       radvd policy stores data with multiple different file context types un‐
138       der  the /var/run/radvd directory.  If you would like to store the data
139       in a different directory you can use the semanage command to create  an
140       equivalence  mapping.   If you wanted to store this data under the /srv
141       directory you would execute the following command:
142
143       semanage fcontext -a -e /var/run/radvd /srv/radvd
144       restorecon -R -v /srv/radvd
145
146       STANDARD FILE CONTEXT
147
148       SELinux defines the file context types for the radvd, if you wanted  to
149       store  files  with  these types in a diffent paths, you need to execute
150       the semanage command to specify alternate labeling  and  then  use  re‐
151       storecon to put the labels on disk.
152
153       semanage fcontext -a -t radvd_var_run_t '/srv/myradvd_content(/.*)?'
154       restorecon -R -v /srv/myradvd_content
155
156       Note:  SELinux  often  uses  regular expressions to specify labels that
157       match multiple files.
158
159       The following file types are defined for radvd:
160
161
162
163       radvd_etc_t
164
165       - Set files with the radvd_etc_t type, if you want to store radvd files
166       in the /etc directories.
167
168
169
170       radvd_exec_t
171
172       -  Set  files  with the radvd_exec_t type, if you want to transition an
173       executable to the radvd_t domain.
174
175
176
177       radvd_initrc_exec_t
178
179       - Set files with the radvd_initrc_exec_t type, if you want  to  transi‐
180       tion an executable to the radvd_initrc_t domain.
181
182
183
184       radvd_var_run_t
185
186       -  Set  files  with  the radvd_var_run_t type, if you want to store the
187       radvd files under the /run or /var/run directory.
188
189
190       Paths:
191            /var/run/radvd(/.*)?, /var/run/radvd.pid
192
193
194       Note: File context can be temporarily modified with the chcon  command.
195       If  you want to permanently change the file context you need to use the
196       semanage fcontext command.  This will modify the SELinux labeling data‐
197       base.  You will need to use restorecon to apply the labels.
198
199

COMMANDS

201       semanage  fcontext  can also be used to manipulate default file context
202       mappings.
203
204       semanage permissive can also be used to manipulate  whether  or  not  a
205       process type is permissive.
206
207       semanage  module can also be used to enable/disable/install/remove pol‐
208       icy modules.
209
210       semanage boolean can also be used to manipulate the booleans
211
212
213       system-config-selinux is a GUI tool available to customize SELinux pol‐
214       icy settings.
215
216

AUTHOR

218       This manual page was auto-generated using sepolicy manpage .
219
220

SEE ALSO

222       selinux(8),  radvd(8),  semanage(8),  restorecon(8),  chcon(1),  sepol‐
223       icy(8), setsebool(8)
224
225
226
227radvd                              23-02-03                   radvd_selinux(8)
Impressum