1rpcbind_selinux(8)          SELinux Policy rpcbind          rpcbind_selinux(8)
2
3
4

NAME

6       rpcbind_selinux  -  Security Enhanced Linux Policy for the rpcbind pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux secures  the  rpcbind  processes  via  flexible
11       mandatory access control.
12
13       The  rpcbind processes execute with the rpcbind_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep rpcbind_t
20
21
22

ENTRYPOINTS

24       The  rpcbind_t  SELinux type can be entered via the rpcbind_exec_t file
25       type.
26
27       The default entrypoint paths for the rpcbind_t domain are  the  follow‐
28       ing:
29
30       /bin/rpcbind, /sbin/rpcbind, /usr/bin/rpcbind, /usr/sbin/rpcbind
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       rpcbind  policy  is very flexible allowing users to setup their rpcbind
40       processes in as secure a method as possible.
41
42       The following process types are defined for rpcbind:
43
44       rpcbind_t
45
46       Note: semanage permissive -a rpcbind_t can be used to make the  process
47       type  rpcbind_t  permissive. SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux policy is customizable based on least access required.  rpcbind
54       policy is extremely flexible and has several booleans that allow you to
55       manipulate  the  policy and run rpcbind with the tightest access possi‐
56       ble.
57
58
59
60       If you want to allow all domains to execute in fips_mode, you must turn
61       on the fips_mode boolean. Enabled by default.
62
63       setsebool -P fips_mode 1
64
65
66

MANAGED FILES

68       The  SELinux  process  type rpcbind_t can manage files labeled with the
69       following file types.  The paths listed are the default paths for these
70       file types.  Note the processes UID still need to have DAC permissions.
71
72       cluster_conf_t
73
74            /etc/cluster(/.*)?
75
76       cluster_var_lib_t
77
78            /var/lib/pcsd(/.*)?
79            /var/lib/cluster(/.*)?
80            /var/lib/openais(/.*)?
81            /var/lib/pengine(/.*)?
82            /var/lib/corosync(/.*)?
83            /usr/lib/heartbeat(/.*)?
84            /var/lib/heartbeat(/.*)?
85            /var/lib/pacemaker(/.*)?
86
87       cluster_var_run_t
88
89            /var/run/crm(/.*)?
90            /var/run/cman_.*
91            /var/run/rsctmp(/.*)?
92            /var/run/aisexec.*
93            /var/run/heartbeat(/.*)?
94            /var/run/pcsd-ruby.socket
95            /var/run/corosync-qnetd(/.*)?
96            /var/run/corosync-qdevice(/.*)?
97            /var/run/corosync.pid
98            /var/run/cpglockd.pid
99            /var/run/rgmanager.pid
100            /var/run/cluster/rgmanager.sk
101
102       krb5_host_rcache_t
103
104            /var/tmp/krb5_0.rcache2
105            /var/cache/krb5rcache(/.*)?
106            /var/tmp/nfs_0
107            /var/tmp/DNS_25
108            /var/tmp/host_0
109            /var/tmp/imap_0
110            /var/tmp/HTTP_23
111            /var/tmp/HTTP_48
112            /var/tmp/ldap_55
113            /var/tmp/ldap_487
114            /var/tmp/ldapmap1_0
115
116       root_t
117
118            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
119            /
120            /initrd
121
122       rpcbind_tmp_t
123
124
125       rpcbind_var_lib_t
126
127            /var/lib/rpcbind(/.*)?
128            /var/cache/rpcbind(/.*)?
129
130       rpcbind_var_run_t
131
132            /var/run/rpc.statd.pid
133            /var/run/rpcbind.*
134
135

FILE CONTEXTS

137       SELinux requires files to have an extended attribute to define the file
138       type.
139
140       You can see the context of a file using the -Z option to ls
141
142       Policy governs the access  confined  processes  have  to  these  files.
143       SELinux  rpcbind  policy is very flexible allowing users to setup their
144       rpcbind processes in as secure a method as possible.
145
146       STANDARD FILE CONTEXT
147
148       SELinux defines the file context types for the rpcbind, if  you  wanted
149       to store files with these types in a diffent paths, you need to execute
150       the semanage command to specify alternate labeling  and  then  use  re‐
151       storecon to put the labels on disk.
152
153       semanage   fcontext   -a  -t  rpcbind_unit_file_t  '/srv/myrpcbind_con‐
154       tent(/.*)?'
155       restorecon -R -v /srv/myrpcbind_content
156
157       Note: SELinux often uses regular expressions  to  specify  labels  that
158       match multiple files.
159
160       The following file types are defined for rpcbind:
161
162
163
164       rpcbind_exec_t
165
166       -  Set files with the rpcbind_exec_t type, if you want to transition an
167       executable to the rpcbind_t domain.
168
169
170       Paths:
171            /bin/rpcbind, /sbin/rpcbind, /usr/bin/rpcbind, /usr/sbin/rpcbind
172
173
174       rpcbind_initrc_exec_t
175
176       - Set files with the rpcbind_initrc_exec_t type, if you want to transi‐
177       tion an executable to the rpcbind_initrc_t domain.
178
179
180
181       rpcbind_tmp_t
182
183       -  Set  files with the rpcbind_tmp_t type, if you want to store rpcbind
184       temporary files in the /tmp directories.
185
186
187
188       rpcbind_unit_file_t
189
190       - Set files with the rpcbind_unit_file_t type, if you want to treat the
191       files as rpcbind unit content.
192
193
194
195       rpcbind_var_lib_t
196
197       -  Set  files with the rpcbind_var_lib_t type, if you want to store the
198       rpcbind files under the /var/lib directory.
199
200
201       Paths:
202            /var/lib/rpcbind(/.*)?, /var/cache/rpcbind(/.*)?
203
204
205       rpcbind_var_run_t
206
207       - Set files with the rpcbind_var_run_t type, if you want to  store  the
208       rpcbind files under the /run or /var/run directory.
209
210
211       Paths:
212            /var/run/rpc.statd.pid, /var/run/rpcbind.*
213
214
215       Note:  File context can be temporarily modified with the chcon command.
216       If you want to permanently change the file context you need to use  the
217       semanage fcontext command.  This will modify the SELinux labeling data‐
218       base.  You will need to use restorecon to apply the labels.
219
220

COMMANDS

222       semanage fcontext can also be used to manipulate default  file  context
223       mappings.
224
225       semanage  permissive  can  also  be used to manipulate whether or not a
226       process type is permissive.
227
228       semanage module can also be used to enable/disable/install/remove  pol‐
229       icy modules.
230
231       semanage boolean can also be used to manipulate the booleans
232
233
234       system-config-selinux is a GUI tool available to customize SELinux pol‐
235       icy settings.
236
237

AUTHOR

239       This manual page was auto-generated using sepolicy manpage .
240
241

SEE ALSO

243       selinux(8), rpcbind(8), semanage(8),  restorecon(8),  chcon(1),  sepol‐
244       icy(8), setsebool(8)
245
246
247
248rpcbind                            23-02-03                 rpcbind_selinux(8)
Impressum