1ypserv_selinux(8) SELinux Policy ypserv ypserv_selinux(8)
2
6 ypserv_selinux - Security Enhanced Linux Policy for the ypserv pro‐
7 cesses
8
10 Security-Enhanced Linux secures the ypserv processes via flexible
11 mandatory access control.
12 The ypserv processes execute with the ypserv_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16 For example:
18 ps -eZ | grep ypserv_t
20
24 The ypserv_t SELinux type can be entered via the ypserv_exec_t file
25 type.
26 The default entrypoint paths for the ypserv_t domain are the following:
28 /usr/sbin/ypserv
30
32 SELinux defines process types (domains) for each process running on the
33 system
34 You can see the context of a process using the -Z option to ps
36 Policy governs the access confined processes have to files. SELinux
38 ypserv policy is very flexible allowing users to setup their ypserv
39 processes in as secure a method as possible.
40 The following process types are defined for ypserv:
42 ypserv_t
44 Note: semanage permissive -a ypserv_t can be used to make the process
46 type ypserv_t permissive. SELinux does not deny access to permissive
47 process types, but the AVC (SELinux denials) messages are still gener‐
48 ated.
49
52 SELinux policy is customizable based on least access required. ypserv
53 policy is extremely flexible and has several booleans that allow you to
54 manipulate the policy and run ypserv with the tightest access possible.
55 If you want to allow all domains to execute in fips_mode, you must turn
59 on the fips_mode boolean. Enabled by default.
60 setsebool -P fips_mode 1
62
66 The SELinux process type ypserv_t can manage files labeled with the
67 following file types. The paths listed are the default paths for these
68 file types. Note the processes UID still need to have DAC permissions.
69 cluster_conf_t
71 /etc/cluster(/.*)?
73 cluster_var_lib_t
75 /var/lib/pcsd(/.*)?
77 /var/lib/cluster(/.*)?
78 /var/lib/openais(/.*)?
79 /var/lib/pengine(/.*)?
80 /var/lib/corosync(/.*)?
81 /usr/lib/heartbeat(/.*)?
82 /var/lib/heartbeat(/.*)?
83 /var/lib/pacemaker(/.*)?
84 cluster_var_run_t
86 /var/run/crm(/.*)?
88 /var/run/cman_.*
89 /var/run/rsctmp(/.*)?
90 /var/run/aisexec.*
91 /var/run/heartbeat(/.*)?
92 /var/run/pcsd-ruby.socket
93 /var/run/corosync-qnetd(/.*)?
94 /var/run/corosync-qdevice(/.*)?
95 /var/run/corosync.pid
96 /var/run/cpglockd.pid
97 /var/run/rgmanager.pid
98 /var/run/cluster/rgmanager.sk
99 root_t
101 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
103 /
104 /initrd
105 var_yp_t
107 /var/yp(/.*)?
109 ypserv_tmp_t
111 ypserv_var_run_t
114 /var/run/ypserv.*
116
119 SELinux requires files to have an extended attribute to define the file
120 type.
121 You can see the context of a file using the -Z option to ls
123 Policy governs the access confined processes have to these files.
125 SELinux ypserv policy is very flexible allowing users to setup their
126 ypserv processes in as secure a method as possible.
127 STANDARD FILE CONTEXT
129 SELinux defines the file context types for the ypserv, if you wanted to
131 store files with these types in a diffent paths, you need to execute
132 the semanage command to specify alternate labeling and then use re‐
133 storecon to put the labels on disk.
134 semanage fcontext -a -t ypserv_var_run_t '/srv/myypserv_content(/.*)?'
136 restorecon -R -v /srv/myypserv_content
137 Note: SELinux often uses regular expressions to specify labels that
139 match multiple files.
140 The following file types are defined for ypserv:
142 ypserv_conf_t
146 - Set files with the ypserv_conf_t type, if you want to treat the files
148 as ypserv configuration data, usually stored under the /etc directory.
149 ypserv_exec_t
153 - Set files with the ypserv_exec_t type, if you want to transition an
155 executable to the ypserv_t domain.
156 ypserv_tmp_t
160 - Set files with the ypserv_tmp_t type, if you want to store ypserv
162 temporary files in the /tmp directories.
163 ypserv_var_run_t
167 - Set files with the ypserv_var_run_t type, if you want to store the
169 ypserv files under the /run or /var/run directory.
170 Note: File context can be temporarily modified with the chcon command.
174 If you want to permanently change the file context you need to use the
175 semanage fcontext command. This will modify the SELinux labeling data‐
176 base. You will need to use restorecon to apply the labels.
177
180 semanage fcontext can also be used to manipulate default file context
181 mappings.
182 semanage permissive can also be used to manipulate whether or not a
184 process type is permissive.
185 semanage module can also be used to enable/disable/install/remove pol‐
187 icy modules.
188 semanage boolean can also be used to manipulate the booleans
190 system-config-selinux is a GUI tool available to customize SELinux pol‐
193 icy settings.
194
197 This manual page was auto-generated using sepolicy manpage .
198
201 selinux(8), ypserv(8), semanage(8), restorecon(8), chcon(1), sepol‐
202 icy(8), setsebool(8)
203ypserv 23-02-03 ypserv_selinux(8)