1FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)
3
7 fence_ipmilan - Fence agent for IPMI
8 fence_ilo3 - Fence agent for HP iLO3 (symlink)
10 fence_ilo4 - Fence agent for HP iLO4 (symlink)
13 fence_ilo5 - Fence agent for HP iLO5 (symlink)
16 fence_ipmilanplus - Fence agent for IPMIv2 lanplus (symlink)
19 fence_imm - Fence agent for IBM Integrated Management Module (symlink)
22 fence_idrac - Fence agent for Dell iDRAC (symlink)
25
28 fence_ipmilan is an I/O Fencing agentwhich can be used with machines
29 controlled by IPMI.This agent calls support software ipmitool
30 (http://ipmitool.sf.net/). WARNING! This fence agent might report suc‐
31 cess before the node is powered off. You should use -m/method onoff if
32 your fence device works correctly with that option.
33 fence_ipmilan accepts options on the command line as well as from
35 stdin. Fenced sends parameters through stdin when it execs the agent.
36 fence_ipmilan can be run by itself with command line options. This is
37 useful for testing and for turning outlets on or off from scripts.
38 Vendor URL:
40
42 -o, --action=[action]
45 Fencing action (Default Value: reboot)
46 -A, --auth=[auth]
48 IPMI Lan Auth type. (md5|password|none)
49 -C, --cipher=[cipher]
51 Ciphersuite to use (same as ipmitool -C parameter)
52 --hexadecimal-kg=[key]
54 Hexadecimal-encoded Kg key for IPMIv2 authentication
55 -a, --ip=[ip]
57 IP address or hostname of fencing device
58 -u, --ipport=[port]
60 TCP/UDP port to use for connection with device (Default Value:
61 623)
62 -P, --lanplus
64 Use Lanplus to improve security of connection (Default Value: 0)
65 -m, --method=[method]
68 Method to fence (onoff|cycle) (Default Value: onoff)
69 -p, --password=[password]
72 Login password or passphrase
73 -S, --password-script=[script]
75 Script to run to retrieve password
76 -n, --plug=[ip]
78 IP address or hostname of fencing device (together with --port-
79 as-ip)
80 -L, --privlvl=[level]
82 Privilege level on IPMI device (callback|user|operator|adminis‐
83 trator) (Default Value: administrator)
84 --target=[targetaddress]
86 Bridge IPMI requests to the remote target address
87 -l, --username=[name]
89 Login name
90 -q, --quiet
92 Disable logging to stderr. Does not affect --verbose or --debug-
93 file or logging to syslog.
94 -v, --verbose
96 Verbose mode. Multiple -v flags can be stacked on the command
97 line (e.g., -vvv) to increase verbosity.
98 --verbose-level
100 Level of debugging detail in output. Defaults to the number of
101 --verbose flags specified on the command line, or to 1 if ver‐
102 bose=1 in a stonith device configuration (i.e., on stdin).
103 -D, --debug-file=[debugfile]
106 Write debug information to given file
107 -V, --version
109 Display version information and exit
110 -h, --help
112 Display help and exit
113 --plug-separator=[char]
115 Separator for plug parameter when specifying more than 1 plug
116 (Default Value: ,)
117 --delay=[seconds]
119 Wait X seconds before fencing is started (Default Value: 0)
120 --disable-timeout=[true/false]
123 Disable timeout (true/false) (default: true when run from Pace‐
124 maker 2.0+)
125 --ipmitool-path=[path]
127 Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
128 --login-timeout=[seconds]
130 Wait X seconds for cmd prompt after login (Default Value: 5)
131 --port-as-ip
134 Make "port/plug" to be an alias to IP address
135 --power-timeout=[seconds]
137 Test X seconds for status change after ON/OFF (Default Value:
138 20)
139 --power-wait=[seconds]
141 Wait X seconds after issuing ON/OFF (Default Value: 2)
142 --shell-timeout=[seconds]
144 Wait X seconds for cmd prompt after issuing command (Default
145 Value: 3)
146 --stonith-status-sleep=[seconds]
148 Sleep X seconds between status calls during a STONITH action
149 (Default Value: 1)
150 --ipmitool-timeout=[timeout]
152 Timeout (sec) for IPMI operation (Default Value: 2)
153 --retry-on=[attempts]
155 Count of attempts to retry power on (Default Value: 1)
156 --use-sudo
159 Use sudo (without password) when calling 3rd party software
160 --sudo-path=[path]
163 Path to sudo binary (Default Value: /usr/bin/sudo)
164
167 on Power on machine.
170 off Power off machine.
172 reboot Reboot machine.
174 status This returns the status of the plug/virtual machine.
176 monitor
178 Check the health of fence device
179 metadata
181 Display the XML metadata describing this resource.
182 manpage
184 The operational behavior of this is not known.
185 validate-all
187 Validate if all required parameters are entered.
188 diag Pulse a diagnostic interrupt to the processor(s).
190
193 action Fencing action (Default Value: reboot)
196 auth IPMI Lan Auth type. (md5|password|none)
198 cipher Ciphersuite to use (same as ipmitool -C parameter)
200 hexadecimal_kg
202 Hexadecimal-encoded Kg key for IPMIv2 authentication
203 ip IP address or hostname of fencing device Obsoletes: ipaddr
205 ipport TCP/UDP port to use for connection with device (Default Value:
208 623)
209 lanplus
211 Use Lanplus to improve security of connection (Default Value: 0)
212 method Method to fence (onoff|cycle) (Default Value: onoff)
215 password
218 Login password or passphrase Obsoletes: passwd
219 password_script
221 Script to run to retrieve password Obsoletes: passwd_script
222 plug IP address or hostname of fencing device (together with --port-
225 as-ip) Obsoletes: port
226 privlvl
228 Privilege level on IPMI device (callback|user|operator|adminis‐
229 trator) (Default Value: administrator)
230 target Bridge IPMI requests to the remote target address
232 username
234 Login name Obsoletes: login
235 quiet Disable logging to stderr. Does not affect --verbose or --debug-
237 file or logging to syslog.
238 verbose
240 Verbose mode. Multiple -v flags can be stacked on the command
241 line (e.g., -vvv) to increase verbosity.
242 verbose_level
244 Level of debugging detail in output. Defaults to the number of
245 --verbose flags specified on the command line, or to 1 if ver‐
246 bose=1 in a stonith device configuration (i.e., on stdin).
247 debug_file
250 Write debug information to given file Obsoletes: debug
251 version
253 Display version information and exit
254 help Display help and exit
256 plug_separator
258 Separator for plug parameter when specifying more than 1 plug
259 (Default Value: ,)
260 delay Wait X seconds before fencing is started (Default Value: 0)
262 disable_timeout
265 Disable timeout (true/false) (default: true when run from Pace‐
266 maker 2.0+)
267 ipmitool_path
269 Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
270 login_timeout
272 Wait X seconds for cmd prompt after login (Default Value: 5)
273 port_as_ip
276 Make "port/plug" to be an alias to IP address
277 power_timeout
279 Test X seconds for status change after ON/OFF (Default Value:
280 20)
281 power_wait
283 Wait X seconds after issuing ON/OFF (Default Value: 2)
284 shell_timeout
286 Wait X seconds for cmd prompt after issuing command (Default
287 Value: 3)
288 stonith_status_sleep
290 Sleep X seconds between status calls during a STONITH action
291 (Default Value: 1)
292 ipmitool_timeout
294 Timeout (sec) for IPMI operation (Default Value: 2)
295 retry_on
297 Count of attempts to retry power on (Default Value: 1)
298 use_sudo
301 Use sudo (without password) when calling 3rd party software Ob‐
302 soletes: sudo
303 sudo_path
305 Path to sudo binary (Default Value: /usr/bin/sudo)
306fence_ipmilan (Fence Agent) 2009-10-20 FENCE_AGENT(8)