1OPENSSL-OCSP(1ossl)                 OpenSSL                OPENSSL-OCSP(1ossl)
2
3
4

NAME

6       openssl-ocsp - Online Certificate Status Protocol command
7

SYNOPSIS

9   OCSP Client
10       openssl ocsp [-help] [-out file] [-issuer file] [-cert file]
11       [-no_certs] [-serial n] [-signer file] [-signkey file] [-sign_other
12       file] [-nonce] [-no_nonce] [-req_text] [-resp_text] [-text] [-reqout
13       file] [-respout file] [-reqin file] [-respin file] [-url URL] [-host
14       host:port] [-path] [-proxy [http[s]://][userinfo@]host[:port][/path]]
15       [-no_proxy addresses] [-header] [-timeout seconds] [-VAfile file]
16       [-validity_period n] [-status_age n] [-noverify] [-verify_other file]
17       [-trust_other] [-no_intern] [-no_signature_verify] [-no_cert_verify]
18       [-no_chain] [-no_cert_checks] [-no_explicit] [-port num] [-ignore_err]
19
20   OCSP Server
21       openssl ocsp [-index file] [-CA file] [-rsigner file] [-rkey file]
22       [-passin arg] [-rother file] [-rsigopt nm:v] [-rmd digest] [-badsig]
23       [-resp_no_certs] [-nmin n] [-ndays n] [-resp_key_id] [-nrequest n]
24       [-multi process-count] [-rcid digest] [-digest] [-CAfile file]
25       [-no-CAfile] [-CApath dir] [-no-CApath] [-CAstore uri] [-no-CAstore]
26       [-allow_proxy_certs] [-attime timestamp] [-no_check_time]
27       [-check_ss_sig] [-crl_check] [-crl_check_all] [-explicit_policy]
28       [-extended_crl] [-ignore_critical] [-inhibit_any] [-inhibit_map]
29       [-partial_chain] [-policy arg] [-policy_check] [-policy_print]
30       [-purpose purpose] [-suiteB_128] [-suiteB_128_only] [-suiteB_192]
31       [-trusted_first] [-no_alt_chains] [-use_deltas] [-auth_level num]
32       [-verify_depth num] [-verify_email email] [-verify_hostname hostname]
33       [-verify_ip ip] [-verify_name name] [-x509_strict] [-issuer_checks]
34       [-provider name] [-provider-path path] [-propquery propq]
35

DESCRIPTION

37       The Online Certificate Status Protocol (OCSP) enables applications to
38       determine the (revocation) state of an identified certificate (RFC
39       2560).
40
41       This command performs many common OCSP tasks. It can be used to print
42       out requests and responses, create requests and send queries to an OCSP
43       responder and behave like a mini OCSP server itself.
44

OPTIONS

46       This command operates as either a client or a server.  The options are
47       described below, divided into those two modes.
48
49   OCSP Client Options
50       -help
51           Print out a usage message.
52
53       -out filename
54           specify output filename, default is standard output.
55
56       -issuer filename
57           This specifies the current issuer certificate. This option can be
58           used multiple times.  This option MUST come before any -cert
59           options.
60
61       -cert filename
62           Add the certificate filename to the request. The issuer certificate
63           is taken from the previous -issuer option, or an error occurs if no
64           issuer certificate is specified.
65
66       -no_certs
67           Don't include any certificates in signed request.
68
69       -serial num
70           Same as the -cert option except the certificate with serial number
71           num is added to the request. The serial number is interpreted as a
72           decimal integer unless preceded by "0x". Negative integers can also
73           be specified by preceding the value by a "-" sign.
74
75       -signer filename, -signkey filename
76           Sign the OCSP request using the certificate specified in the
77           -signer option and the private key specified by the -signkey
78           option. If the -signkey option is not present then the private key
79           is read from the same file as the certificate. If neither option is
80           specified then the OCSP request is not signed.
81
82       -sign_other filename
83           Additional certificates to include in the signed request.  The
84           input can be in PEM, DER, or PKCS#12 format.
85
86       -nonce, -no_nonce
87           Add an OCSP nonce extension to a request or disable OCSP nonce
88           addition.  Normally if an OCSP request is input using the -reqin
89           option no nonce is added: using the -nonce option will force
90           addition of a nonce.  If an OCSP request is being created (using
91           -cert and -serial options) a nonce is automatically added
92           specifying -no_nonce overrides this.
93
94       -req_text, -resp_text, -text
95           Print out the text form of the OCSP request, response or both
96           respectively.
97
98       -reqout file, -respout file
99           Write out the DER encoded certificate request or response to file.
100
101       -reqin file, -respin file
102           Read OCSP request or response file from file. These option are
103           ignored if OCSP request or response creation is implied by other
104           options (for example with -serial, -cert and -host options).
105
106       -url responder_url
107           Specify the responder URL. Both HTTP and HTTPS (SSL/TLS) URLs can
108           be specified.  The optional userinfo and fragment components are
109           ignored.  Any given query component is handled as part of the path
110           component.
111
112       -host hostname:port, -path pathname
113           If the -host option is present then the OCSP request is sent to the
114           host hostname on port port. The -path option specifies the HTTP
115           pathname to use or "/" by default.  This is equivalent to
116           specifying -url with scheme http:// and the given hostname, port,
117           and pathname.
118
119       -proxy [http[s]://][userinfo@]host[:port][/path]
120           The HTTP(S) proxy server to use for reaching the OCSP server unless
121           -no_proxy applies, see below.  The proxy port defaults to 80 or 443
122           if the scheme is "https"; apart from that the optional "http://" or
123           "https://" prefix is ignored, as well as any userinfo and path
124           components.  Defaults to the environment variable "http_proxy" if
125           set, else "HTTP_PROXY" in case no TLS is used, otherwise
126           "https_proxy" if set, else "HTTPS_PROXY".
127
128       -no_proxy addresses
129           List of IP addresses and/or DNS names of servers not to use an
130           HTTP(S) proxy for, separated by commas and/or whitespace (where in
131           the latter case the whole argument must be enclosed in "...").
132           Default is from the environment variable "no_proxy" if set, else
133           "NO_PROXY".
134
135       -header name=value
136           Adds the header name with the specified value to the OCSP request
137           that is sent to the responder.  This may be repeated.
138
139       -timeout seconds
140           Connection timeout to the OCSP responder in seconds.  On POSIX
141           systems, when running as an OCSP responder, this option also limits
142           the time that the responder is willing to wait for the client
143           request.  This time is measured from the time the responder accepts
144           the connection until the complete request is received.
145
146       -verify_other file
147           File or URI containing additional certificates to search when
148           attempting to locate the OCSP response signing certificate. Some
149           responders omit the actual signer's certificate from the response:
150           this option can be used to supply the necessary certificate in such
151           cases.  The input can be in PEM, DER, or PKCS#12 format.
152
153       -trust_other
154           The certificates specified by the -verify_other option should be
155           explicitly trusted and no additional checks will be performed on
156           them. This is useful when the complete responder certificate chain
157           is not available or trusting a root CA is not appropriate.
158
159       -VAfile file
160           File or URI containing explicitly trusted responder certificates.
161           Equivalent to the -verify_other and -trust_other options.  The
162           input can be in PEM, DER, or PKCS#12 format.
163
164       -noverify
165           Don't attempt to verify the OCSP response signature or the nonce
166           values. This option will normally only be used for debugging since
167           it disables all verification of the responders certificate.
168
169       -no_intern
170           Ignore certificates contained in the OCSP response when searching
171           for the signers certificate. With this option the signers
172           certificate must be specified with either the -verify_other or
173           -VAfile options.
174
175       -no_signature_verify
176           Don't check the signature on the OCSP response. Since this option
177           tolerates invalid signatures on OCSP responses it will normally
178           only be used for testing purposes.
179
180       -no_cert_verify
181           Don't verify the OCSP response signers certificate at all. Since
182           this option allows the OCSP response to be signed by any
183           certificate it should only be used for testing purposes.
184
185       -no_chain
186           Do not use certificates in the response as additional untrusted CA
187           certificates.
188
189       -no_explicit
190           Do not explicitly trust the root CA if it is set to be trusted for
191           OCSP signing.
192
193       -no_cert_checks
194           Don't perform any additional checks on the OCSP response signers
195           certificate.  That is do not make any checks to see if the signers
196           certificate is authorised to provide the necessary status
197           information: as a result this option should only be used for
198           testing purposes.
199
200       -validity_period nsec, -status_age age
201           These options specify the range of times, in seconds, which will be
202           tolerated in an OCSP response. Each certificate status response
203           includes a notBefore time and an optional notAfter time. The
204           current time should fall between these two values, but the interval
205           between the two times may be only a few seconds. In practice the
206           OCSP responder and clients clocks may not be precisely synchronised
207           and so such a check may fail. To avoid this the -validity_period
208           option can be used to specify an acceptable error range in seconds,
209           the default value is 5 minutes.
210
211           If the notAfter time is omitted from a response then this means
212           that new status information is immediately available. In this case
213           the age of the notBefore field is checked to see it is not older
214           than age seconds old.  By default this additional check is not
215           performed.
216
217       -rcid digest
218           This option sets the digest algorithm to use for certificate
219           identification in the OCSP response. Any digest supported by the
220           openssl-dgst(1) command can be used. The default is the same digest
221           algorithm used in the request.
222
223       -digest
224           This option sets digest algorithm to use for certificate
225           identification in the OCSP request. Any digest supported by the
226           OpenSSL dgst command can be used.  The default is SHA-1. This
227           option may be used multiple times to specify the digest used by
228           subsequent certificate identifiers.
229
230       -CAfile file, -no-CAfile, -CApath dir, -no-CApath, -CAstore uri,
231       -no-CAstore
232           See "Trusted Certificate Options" in
233           openssl-verification-options(1) for details.
234
235       -allow_proxy_certs, -attime, -no_check_time, -check_ss_sig, -crl_check,
236       -crl_check_all, -explicit_policy, -extended_crl, -ignore_critical,
237       -inhibit_any, -inhibit_map, -no_alt_chains, -partial_chain, -policy,
238       -policy_check, -policy_print, -purpose, -suiteB_128, -suiteB_128_only,
239       -suiteB_192, -trusted_first, -use_deltas, -auth_level, -verify_depth,
240       -verify_email, -verify_hostname, -verify_ip, -verify_name, -x509_strict
241       -issuer_checks
242           Set various options of certificate chain verification.  See
243           "Verification Options" in openssl-verification-options(1) for
244           details.
245
246       -provider name
247       -provider-path path
248       -propquery propq
249           See "Provider Options" in openssl(1), provider(7), and property(7).
250
251   OCSP Server Options
252       -index indexfile
253           The indexfile parameter is the name of a text index file in ca
254           format containing certificate revocation information.
255
256           If the -index option is specified then this command switches to
257           responder mode, otherwise it is in client mode. The request(s) the
258           responder processes can be either specified on the command line
259           (using -issuer and -serial options), supplied in a file (using the
260           -reqin option) or via external OCSP clients (if -port or -url is
261           specified).
262
263           If the -index option is present then the -CA and -rsigner options
264           must also be present.
265
266       -CA file
267           CA certificate corresponding to the revocation information in the
268           index file given with -index.  The input can be in PEM, DER, or
269           PKCS#12 format.
270
271       -rsigner file
272           The certificate to sign OCSP responses with.
273
274       -rkey file
275           The private key to sign OCSP responses with: if not present the
276           file specified in the -rsigner option is used.
277
278       -passin arg
279           The private key password source. For more information about the
280           format of arg see openssl-passphrase-options(1).
281
282       -rother file
283           Additional certificates to include in the OCSP response.  The input
284           can be in PEM, DER, or PKCS#12 format.
285
286       -rsigopt nm:v
287           Pass options to the signature algorithm when signing OCSP
288           responses.  Names and values of these options are algorithm-
289           specific.
290
291       -rmd digest
292           The digest to use when signing the response.
293
294       -badsig
295           Corrupt the response signature before writing it; this can be
296           useful for testing.
297
298       -resp_no_certs
299           Don't include any certificates in the OCSP response.
300
301       -resp_key_id
302           Identify the signer certificate using the key ID, default is to use
303           the subject name.
304
305       -port portnum
306           Port to listen for OCSP requests on. The port may also be specified
307           using the url option.  A 0 argument indicates that any available
308           port shall be chosen automatically.
309
310       -ignore_err
311           Ignore malformed requests or responses: When acting as an OCSP
312           client, retry if a malformed response is received. When acting as
313           an OCSP responder, continue running instead of terminating upon
314           receiving a malformed request.
315
316       -nrequest number
317           The OCSP server will exit after receiving number requests, default
318           unlimited.
319
320       -multi process-count
321           Run the specified number of OCSP responder child processes, with
322           the parent process respawning child processes as needed.  Child
323           processes will detect changes in the CA index file and
324           automatically reload it.  When running as a responder -timeout
325           option is recommended to limit the time each child is willing to
326           wait for the client's OCSP response.  This option is available on
327           POSIX systems (that support the fork() and other required unix
328           system-calls).
329
330       -nmin minutes, -ndays days
331           Number of minutes or days when fresh revocation information is
332           available: used in the nextUpdate field. If neither option is
333           present then the nextUpdate field is omitted meaning fresh
334           revocation information is immediately available.
335

OCSP RESPONSE VERIFICATION

337       OCSP Response follows the rules specified in RFC2560.
338
339       Initially the OCSP responder certificate is located and the signature
340       on the OCSP request checked using the responder certificate's public
341       key.
342
343       Then a normal certificate verify is performed on the OCSP responder
344       certificate building up a certificate chain in the process. The
345       locations of the trusted certificates used to build the chain can be
346       specified by the -CAfile, -CApath or -CAstore options or they will be
347       looked for in the standard OpenSSL certificates directory.
348
349       If the initial verify fails then the OCSP verify process halts with an
350       error.
351
352       Otherwise the issuing CA certificate in the request is compared to the
353       OCSP responder certificate: if there is a match then the OCSP verify
354       succeeds.
355
356       Otherwise the OCSP responder certificate's CA is checked against the
357       issuing CA certificate in the request. If there is a match and the
358       OCSPSigning extended key usage is present in the OCSP responder
359       certificate then the OCSP verify succeeds.
360
361       Otherwise, if -no_explicit is not set the root CA of the OCSP
362       responders CA is checked to see if it is trusted for OCSP signing. If
363       it is the OCSP verify succeeds.
364
365       If none of these checks is successful then the OCSP verify fails.
366
367       What this effectively means if that if the OCSP responder certificate
368       is authorised directly by the CA it is issuing revocation information
369       about (and it is correctly configured) then verification will succeed.
370
371       If the OCSP responder is a "global responder" which can give details
372       about multiple CAs and has its own separate certificate chain then its
373       root CA can be trusted for OCSP signing. For example:
374
375        openssl x509 -in ocspCA.pem -addtrust OCSPSigning -out trustedCA.pem
376
377       Alternatively the responder certificate itself can be explicitly
378       trusted with the -VAfile option.
379

NOTES

381       As noted, most of the verify options are for testing or debugging
382       purposes.  Normally only the -CApath, -CAfile, -CAstore and (if the
383       responder is a 'global VA') -VAfile options need to be used.
384
385       The OCSP server is only useful for test and demonstration purposes: it
386       is not really usable as a full OCSP responder. It contains only a very
387       simple HTTP request handling and can only handle the POST form of OCSP
388       queries. It also handles requests serially meaning it cannot respond to
389       new requests until it has processed the current one. The text index
390       file format of revocation is also inefficient for large quantities of
391       revocation data.
392
393       It is possible to run this command in responder mode via a CGI script
394       using the -reqin and -respout options.
395

EXAMPLES

397       Create an OCSP request and write it to a file:
398
399        openssl ocsp -issuer issuer.pem -cert c1.pem -cert c2.pem -reqout req.der
400
401       Send a query to an OCSP responder with URL http://ocsp.myhost.com/ save
402       the response to a file, print it out in text form, and verify the
403       response:
404
405        openssl ocsp -issuer issuer.pem -cert c1.pem -cert c2.pem \
406            -url http://ocsp.myhost.com/ -resp_text -respout resp.der
407
408       Read in an OCSP response and print out text form:
409
410        openssl ocsp -respin resp.der -text -noverify
411
412       OCSP server on port 8888 using a standard ca configuration, and a
413       separate responder certificate. All requests and responses are printed
414       to a file.
415
416        openssl ocsp -index demoCA/index.txt -port 8888 -rsigner rcert.pem -CA demoCA/cacert.pem
417               -text -out log.txt
418
419       As above but exit after processing one request:
420
421        openssl ocsp -index demoCA/index.txt -port 8888 -rsigner rcert.pem -CA demoCA/cacert.pem
422            -nrequest 1
423
424       Query status information using an internally generated request:
425
426        openssl ocsp -index demoCA/index.txt -rsigner rcert.pem -CA demoCA/cacert.pem
427            -issuer demoCA/cacert.pem -serial 1
428
429       Query status information using request read from a file, and write the
430       response to a second file.
431
432        openssl ocsp -index demoCA/index.txt -rsigner rcert.pem -CA demoCA/cacert.pem
433            -reqin req.der -respout resp.der
434

HISTORY

436       The -no_alt_chains option was added in OpenSSL 1.1.0.
437
439       Copyright 2001-2021 The OpenSSL Project Authors. All Rights Reserved.
440
441       Licensed under the Apache License 2.0 (the "License").  You may not use
442       this file except in compliance with the License.  You can obtain a copy
443       in the file LICENSE in the source distribution or at
444       <https://www.openssl.org/source/license.html>.
445
446
447
4483.0.5                             2022-11-01               OPENSSL-OCSP(1ossl)
Impressum