1dcerpcd_selinux(8) SELinux Policy dcerpcd dcerpcd_selinux(8)
2
3
4
6 dcerpcd_selinux - Security Enhanced Linux Policy for the dcerpcd pro‐
7 cesses
8
10 Security-Enhanced Linux secures the dcerpcd processes via flexible
11 mandatory access control.
12
13 The dcerpcd processes execute with the dcerpcd_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep dcerpcd_t
20
21
22
24 The dcerpcd_t SELinux type can be entered via the dcerpcd_exec_t file
25 type.
26
27 The default entrypoint paths for the dcerpcd_t domain are the follow‐
28 ing:
29
30 /usr/sbin/dcerpcd, /opt/likewise/sbin/dcerpcd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35
36 You can see the context of a process using the -Z option to ps
37
38 Policy governs the access confined processes have to files. SELinux
39 dcerpcd policy is very flexible allowing users to setup their dcerpcd
40 processes in as secure a method as possible.
41
42 The following process types are defined for dcerpcd:
43
44 dcerpcd_t
45
46 Note: semanage permissive -a dcerpcd_t can be used to make the process
47 type dcerpcd_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
51
53 SELinux policy is customizable based on least access required. dcerpcd
54 policy is extremely flexible and has several booleans that allow you to
55 manipulate the policy and run dcerpcd with the tightest access possi‐
56 ble.
57
58
59
60 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62
63 setsebool -P fips_mode 1
64
65
66
68 The SELinux process type dcerpcd_t can manage files labeled with the
69 following file types. The paths listed are the default paths for these
70 file types. Note the processes UID still need to have DAC permissions.
71
72 cluster_conf_t
73
74 /etc/cluster(/.*)?
75
76 cluster_var_lib_t
77
78 /var/lib/pcsd(/.*)?
79 /var/lib/cluster(/.*)?
80 /var/lib/openais(/.*)?
81 /var/lib/pengine(/.*)?
82 /var/lib/corosync(/.*)?
83 /usr/lib/heartbeat(/.*)?
84 /var/lib/heartbeat(/.*)?
85 /var/lib/pacemaker(/.*)?
86
87 cluster_var_run_t
88
89 /var/run/crm(/.*)?
90 /var/run/cman_.*
91 /var/run/rsctmp(/.*)?
92 /var/run/aisexec.*
93 /var/run/heartbeat(/.*)?
94 /var/run/pcsd-ruby.socket
95 /var/run/corosync-qnetd(/.*)?
96 /var/run/corosync-qdevice(/.*)?
97 /var/run/corosync.pid
98 /var/run/cpglockd.pid
99 /var/run/rgmanager.pid
100 /var/run/cluster/rgmanager.sk
101
102 dcerpcd_var_lib_t
103
104 /var/lib/likewise/run/rpcdep.dat
105 /var/lib/likewise-open/run/rpcdep.dat
106
107 dcerpcd_var_run_t
108
109
110 root_t
111
112 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
113 /
114 /initrd
115
116
118 SELinux requires files to have an extended attribute to define the file
119 type.
120
121 You can see the context of a file using the -Z option to ls
122
123 Policy governs the access confined processes have to these files.
124 SELinux dcerpcd policy is very flexible allowing users to setup their
125 dcerpcd processes in as secure a method as possible.
126
127 STANDARD FILE CONTEXT
128
129 SELinux defines the file context types for the dcerpcd, if you wanted
130 to store files with these types in a diffent paths, you need to execute
131 the semanage command to specify alternate labeling and then use re‐
132 storecon to put the labels on disk.
133
134 semanage fcontext -a -t dcerpcd_var_lib_t '/srv/mydcerpcd_con‐
135 tent(/.*)?'
136 restorecon -R -v /srv/mydcerpcd_content
137
138 Note: SELinux often uses regular expressions to specify labels that
139 match multiple files.
140
141 The following file types are defined for dcerpcd:
142
143
144
145 dcerpcd_exec_t
146
147 - Set files with the dcerpcd_exec_t type, if you want to transition an
148 executable to the dcerpcd_t domain.
149
150
151 Paths:
152 /usr/sbin/dcerpcd, /opt/likewise/sbin/dcerpcd
153
154
155 dcerpcd_var_lib_t
156
157 - Set files with the dcerpcd_var_lib_t type, if you want to store the
158 dcerpcd files under the /var/lib directory.
159
160
161 Paths:
162 /var/lib/likewise/run/rpcdep.dat, /var/lib/likewise-
163 open/run/rpcdep.dat
164
165
166 dcerpcd_var_run_t
167
168 - Set files with the dcerpcd_var_run_t type, if you want to store the
169 dcerpcd files under the /run or /var/run directory.
170
171
172
173 dcerpcd_var_socket_t
174
175 - Set files with the dcerpcd_var_socket_t type, if you want to treat
176 the files as dcerpcd var socket data.
177
178
179 Paths:
180 /var/lib/likewise/rpc/epmapper, /var/lib/likewise-open/rpc/epmap‐
181 per
182
183
184 Note: File context can be temporarily modified with the chcon command.
185 If you want to permanently change the file context you need to use the
186 semanage fcontext command. This will modify the SELinux labeling data‐
187 base. You will need to use restorecon to apply the labels.
188
189
191 semanage fcontext can also be used to manipulate default file context
192 mappings.
193
194 semanage permissive can also be used to manipulate whether or not a
195 process type is permissive.
196
197 semanage module can also be used to enable/disable/install/remove pol‐
198 icy modules.
199
200 semanage boolean can also be used to manipulate the booleans
201
202
203 system-config-selinux is a GUI tool available to customize SELinux pol‐
204 icy settings.
205
206
208 This manual page was auto-generated using sepolicy manpage .
209
210
212 selinux(8), dcerpcd(8), semanage(8), restorecon(8), chcon(1), sepol‐
213 icy(8), setsebool(8)
214
215
216
217dcerpcd 23-02-03 dcerpcd_selinux(8)