1munin_script_selinux(8) SELinux Policy munin_script munin_script_selinux(8)
2
3
4
6 munin_script_selinux - Security Enhanced Linux Policy for the
7 munin_script processes
8
10 Security-Enhanced Linux secures the munin_script processes via flexible
11 mandatory access control.
12
13 The munin_script processes execute with the munin_script_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16
17 For example:
18
19 ps -eZ | grep munin_script_t
20
21
22
24 The munin_script_t SELinux type can be entered via the
25 munin_script_exec_t file type.
26
27 The default entrypoint paths for the munin_script_t domain are the fol‐
28 lowing:
29
30 /var/www/cgi-bin/munin.*, /var/www/html/cgi/munin.*,
31 /var/www/html/munin/cgi(/.*)?
32
34 SELinux defines process types (domains) for each process running on the
35 system
36
37 You can see the context of a process using the -Z option to ps
38
39 Policy governs the access confined processes have to files. SELinux
40 munin_script policy is very flexible allowing users to setup their
41 munin_script processes in as secure a method as possible.
42
43 The following process types are defined for munin_script:
44
45 munin_script_t
46
47 Note: semanage permissive -a munin_script_t can be used to make the
48 process type munin_script_t permissive. SELinux does not deny access to
49 permissive process types, but the AVC (SELinux denials) messages are
50 still generated.
51
52
54 SELinux policy is customizable based on least access required.
55 munin_script policy is extremely flexible and has several booleans that
56 allow you to manipulate the policy and run munin_script with the tight‐
57 est access possible.
58
59
60
61 If you want to allow all domains to execute in fips_mode, you must turn
62 on the fips_mode boolean. Enabled by default.
63
64 setsebool -P fips_mode 1
65
66
67
68 If you want to allow httpd cgi support, you must turn on the httpd_en‐
69 able_cgi boolean. Enabled by default.
70
71 setsebool -P httpd_enable_cgi 1
72
73
74
75 If you want to allow system to run with NIS, you must turn on the
76 nis_enabled boolean. Disabled by default.
77
78 setsebool -P nis_enabled 1
79
80
81
83 The SELinux process type munin_script_t can manage files labeled with
84 the following file types. The paths listed are the default paths for
85 these file types. Note the processes UID still need to have DAC per‐
86 missions.
87
88 krb5_host_rcache_t
89
90 /var/tmp/krb5_0.rcache2
91 /var/cache/krb5rcache(/.*)?
92 /var/tmp/nfs_0
93 /var/tmp/DNS_25
94 /var/tmp/host_0
95 /var/tmp/imap_0
96 /var/tmp/HTTP_23
97 /var/tmp/HTTP_48
98 /var/tmp/ldap_55
99 /var/tmp/ldap_487
100 /var/tmp/ldapmap1_0
101
102 munin_log_t
103
104 /var/log/munin.*
105
106 munin_rw_content_t
107
108
109 munin_script_tmp_t
110
111
112
114 SELinux requires files to have an extended attribute to define the file
115 type.
116
117 You can see the context of a file using the -Z option to ls
118
119 Policy governs the access confined processes have to these files.
120 SELinux munin_script policy is very flexible allowing users to setup
121 their munin_script processes in as secure a method as possible.
122
123 STANDARD FILE CONTEXT
124
125 SELinux defines the file context types for the munin_script, if you
126 wanted to store files with these types in a diffent paths, you need to
127 execute the semanage command to specify alternate labeling and then use
128 restorecon to put the labels on disk.
129
130 semanage fcontext -a -t munin_script_tmp_t '/srv/mymunin_script_con‐
131 tent(/.*)?'
132 restorecon -R -v /srv/mymunin_script_content
133
134 Note: SELinux often uses regular expressions to specify labels that
135 match multiple files.
136
137 The following file types are defined for munin_script:
138
139
140
141 munin_script_exec_t
142
143 - Set files with the munin_script_exec_t type, if you want to transi‐
144 tion an executable to the munin_script_t domain.
145
146
147 Paths:
148 /var/www/cgi-bin/munin.*, /var/www/html/cgi/munin.*,
149 /var/www/html/munin/cgi(/.*)?
150
151
152 munin_script_tmp_t
153
154 - Set files with the munin_script_tmp_t type, if you want to store
155 munin script temporary files in the /tmp directories.
156
157
158
159 Note: File context can be temporarily modified with the chcon command.
160 If you want to permanently change the file context you need to use the
161 semanage fcontext command. This will modify the SELinux labeling data‐
162 base. You will need to use restorecon to apply the labels.
163
164
166 semanage fcontext can also be used to manipulate default file context
167 mappings.
168
169 semanage permissive can also be used to manipulate whether or not a
170 process type is permissive.
171
172 semanage module can also be used to enable/disable/install/remove pol‐
173 icy modules.
174
175 semanage boolean can also be used to manipulate the booleans
176
177
178 system-config-selinux is a GUI tool available to customize SELinux pol‐
179 icy settings.
180
181
183 This manual page was auto-generated using sepolicy manpage .
184
185
187 selinux(8), munin_script(8), semanage(8), restorecon(8), chcon(1), se‐
188 policy(8), setsebool(8)
189
190
191
192munin_script 23-02-03 munin_script_selinux(8)