1targetclid_selinux(8) SELinux Policy targetclid targetclid_selinux(8)
2
6 targetclid_selinux - Security Enhanced Linux Policy for the targetclid
7 processes
8
10 Security-Enhanced Linux secures the targetclid processes via flexible
11 mandatory access control.
12 The targetclid processes execute with the targetclid_t SELinux type.
14 You can check if you have these processes running by executing the ps
15 command with the -Z qualifier.
16 For example:
18 ps -eZ | grep targetclid_t
20
24 The targetclid_t SELinux type can be entered via the targetclid_exec_t
25 file type.
26 The default entrypoint paths for the targetclid_t domain are the fol‐
28 lowing:
29 /usr/bin/targetclid
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 targetclid policy is very flexible allowing users to setup their tar‐
40 getclid processes in as secure a method as possible.
41 The following process types are defined for targetclid:
43 targetclid_t
45 Note: semanage permissive -a targetclid_t can be used to make the
47 process type targetclid_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required. target‐
54 clid policy is extremely flexible and has several booleans that allow
55 you to manipulate the policy and run targetclid with the tightest ac‐
56 cess possible.
57 If you want to allow all domains to execute in fips_mode, you must turn
61 on the fips_mode boolean. Enabled by default.
62 setsebool -P fips_mode 1
64 If you want to disable kernel module loading, you must turn on the se‐
68 cure_mode_insmod boolean. Enabled by default.
69 setsebool -P secure_mode_insmod 1
71
75 The SELinux process type targetclid_t can manage files labeled with the
76 following file types. The paths listed are the default paths for these
77 file types. Note the processes UID still need to have DAC permissions.
78 cluster_conf_t
80 /etc/cluster(/.*)?
82 cluster_var_lib_t
84 /var/lib/pcsd(/.*)?
86 /var/lib/cluster(/.*)?
87 /var/lib/openais(/.*)?
88 /var/lib/pengine(/.*)?
89 /var/lib/corosync(/.*)?
90 /usr/lib/heartbeat(/.*)?
91 /var/lib/heartbeat(/.*)?
92 /var/lib/pacemaker(/.*)?
93 cluster_var_run_t
95 /var/run/crm(/.*)?
97 /var/run/cman_.*
98 /var/run/rsctmp(/.*)?
99 /var/run/aisexec.*
100 /var/run/heartbeat(/.*)?
101 /var/run/pcsd-ruby.socket
102 /var/run/corosync-qnetd(/.*)?
103 /var/run/corosync-qdevice(/.*)?
104 /var/run/corosync.pid
105 /var/run/cpglockd.pid
106 /var/run/rgmanager.pid
107 /var/run/cluster/rgmanager.sk
108 configfs_t
110 root_t
113 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
115 /
116 /initrd
117 targetclid_home_t
119 /root/.targetcli(/.*)?
121 targetclid_tmp_t
123 targetclid_var_run_t
126 /var/run/targetclid.pid
128 /var/run/targetclid.sock
129
132 SELinux requires files to have an extended attribute to define the file
133 type.
134 You can see the context of a file using the -Z option to ls
136 Policy governs the access confined processes have to these files.
138 SELinux targetclid policy is very flexible allowing users to setup
139 their targetclid processes in as secure a method as possible.
140 STANDARD FILE CONTEXT
142 SELinux defines the file context types for the targetclid, if you
144 wanted to store files with these types in a diffent paths, you need to
145 execute the semanage command to specify alternate labeling and then use
146 restorecon to put the labels on disk.
147 semanage fcontext -a -t targetclid_var_run_t '/srv/mytargetclid_con‐
149 tent(/.*)?'
150 restorecon -R -v /srv/mytargetclid_content
151 Note: SELinux often uses regular expressions to specify labels that
153 match multiple files.
154 The following file types are defined for targetclid:
156 targetclid_exec_t
160 - Set files with the targetclid_exec_t type, if you want to transition
162 an executable to the targetclid_t domain.
163 targetclid_home_t
167 - Set files with the targetclid_home_t type, if you want to store tar‐
169 getclid files in the users home directory.
170 targetclid_tmp_t
174 - Set files with the targetclid_tmp_t type, if you want to store tar‐
176 getclid temporary files in the /tmp directories.
177 targetclid_unit_file_t
181 - Set files with the targetclid_unit_file_t type, if you want to treat
183 the files as targetclid unit content.
184 targetclid_var_run_t
188 - Set files with the targetclid_var_run_t type, if you want to store
190 the targetclid files under the /run or /var/run directory.
191 Paths:
194 /var/run/targetclid.pid, /var/run/targetclid.sock
195 Note: File context can be temporarily modified with the chcon command.
198 If you want to permanently change the file context you need to use the
199 semanage fcontext command. This will modify the SELinux labeling data‐
200 base. You will need to use restorecon to apply the labels.
201
204 semanage fcontext can also be used to manipulate default file context
205 mappings.
206 semanage permissive can also be used to manipulate whether or not a
208 process type is permissive.
209 semanage module can also be used to enable/disable/install/remove pol‐
211 icy modules.
212 semanage boolean can also be used to manipulate the booleans
214 system-config-selinux is a GUI tool available to customize SELinux pol‐
217 icy settings.
218
221 This manual page was auto-generated using sepolicy manpage .
222
225 selinux(8), targetclid(8), semanage(8), restorecon(8), chcon(1), sepol‐
226 icy(8), setsebool(8)
227targetclid 23-02-03 targetclid_selinux(8)