1sinfo(1) Slurm Commands sinfo(1)
2
6 sinfo - View information about Slurm nodes and partitions.
7
10 sinfo [OPTIONS...]
11
13 sinfo is used to view partition and node information for a system run‐
14 ning Slurm.
15
18 -a, --all
19 Display information about all partitions. This causes informa‐
20 tion to be displayed about partitions that are configured as
21 hidden and partitions that are unavailable to the user's group.
22 -M, --clusters=<string>
24 Clusters to issue commands to. Multiple cluster names may be
25 comma separated. A value of 'all' will query all clusters. Note
26 that the SlurmDBD must be up for this option to work properly.
27 This option implicitly sets the --local option.
28 -d, --dead
30 If set, only report state information for non-responding (dead)
31 nodes.
32 -e, --exact
34 If set, do not group node information on multiple nodes unless
35 their configurations to be reported are identical. Otherwise cpu
36 count, memory size, and disk space for nodes will be listed with
37 the minimum value followed by a "+" for nodes with the same par‐
38 tition and state (e.g. "250+").
39 --federation
41 Show all partitions from the federation if a member of one.
42 -o, --format=<output_format>
44 Specify the information to be displayed using an sinfo format
45 string. If the command is executed in a federated cluster envi‐
46 ronment and information about more than one cluster is to be
47 displayed and the -h, --noheader option is used, then the clus‐
48 ter name will be displayed before the default output formats
49 shown below. Format strings transparently used by sinfo when
50 running with various options are:
51 default "%#P %.5a %.10l %.6D %.6t %N"
53 --summarize "%#P %.5a %.10l %.16F %N"
55 --long "%#P %.5a %.10l %.10s %.4r %.8h %.10g %.6D %.11T
57 %N"
58 --Node "%#N %.6D %#P %6t"
60 --long --Node "%#N %.6D %#P %.11T %.4c %.8z %.6m %.8d %.6w %.8f
62 %20E"
63 --list-reasons "%20E %9u %19H %N"
65 --long --list-reasons
67 "%20E %12U %19H %6t %N"
68 In the above format strings, the use of "#" represents the maxi‐
70 mum length of any partition name or node list to be printed. A
71 pass is made over the records to be printed to establish the
72 size in order to align the sinfo output, then a second pass is
73 made over the records to print them. Note that the literal
74 character "#" itself is not a valid field length specification,
75 but is only used to document this behaviour.
76 The format of each field is "%[[.]size]type[suffix]"
78 size Minimum field size. If no size is specified, whatever
80 is needed to print the information will be used.
81 . Indicates the output should be right justified and
83 size must be specified. By default output is left
84 justified.
85 suffix Arbitrary string to append to the end of the field.
87 Valid type specifications include:
89 %all Print all fields available for this data type with a ver‐
91 tical bar separating each field.
92 %a State/availability of a partition.
94 %A Number of nodes by state in the format "allocated/idle".
96 Do not use this with a node state option ("%t" or "%T") or
97 the different node states will be placed on separate
98 lines.
99 %b Features currently active on the nodes, also see %f.
101 %B The max number of CPUs per node available to jobs in the
103 partition.
104 %c Number of CPUs per node.
106 %C Number of CPUs by state in the format "allo‐
108 cated/idle/other/total". Do not use this with a node state
109 option ("%t" or "%T") or the different node states will be
110 placed on separate lines.
111 %d Size of temporary disk space per node in megabytes.
113 %D Number of nodes.
115 %e The total memory, in MB, currently free on the node as re‐
117 ported by the OS. This value is for informational use only
118 and is not used for scheduling.
119 %E The reason a node is unavailable (down, drained, or drain‐
121 ing states).
122 %f Features available the nodes, also see %b.
124 %F Number of nodes by state in the format "allo‐
126 cated/idle/other/total". Note the use of this format op‐
127 tion with a node state format option ("%t" or "%T") will
128 result in the different node states being be reported on
129 separate lines.
130 %g Groups which may use the nodes.
132 %G Generic resources (gres) associated with the nodes.
134 %h Print the OverSubscribe setting for the partition.
136 %H Print the timestamp of the reason a node is unavailable.
138 %I Partition job priority weighting factor.
140 %l Maximum time for any job in the format "days-hours:min‐
142 utes:seconds"
143 %L Default time for any job in the format "days-hours:min‐
145 utes:seconds"
146 %m Size of memory per node in megabytes.
148 %M PreemptionMode.
150 %n List of node hostnames.
152 %N List of node names.
154 %o List of node communication addresses.
156 %O CPU load of a node as reported by the OS.
158 %p Partition scheduling tier priority.
160 %P Partition name followed by "*" for the default partition,
162 also see %R.
163 %r Only user root may initiate jobs, "yes" or "no".
165 %R Partition name, also see %P.
167 %s Maximum job size in nodes.
169 %S Allowed allocating nodes.
171 %t State of nodes, compact form.
173 %T State of nodes, extended form.
175 %u Print the user name of who set the reason a node is un‐
177 available.
178 %U Print the user name and uid of who set the reason a node
180 is unavailable.
181 %v Print the version of the running slurmd daemon.
183 %V Print the cluster name if running in a federation.
185 %w Scheduling weight of the nodes.
187 %X Number of sockets per node.
189 %Y Number of cores per socket.
191 %Z Number of threads per core.
193 %z Extended processor information: number of sockets, cores,
195 threads (S:C:T) per node.
196 -O, --Format=<output_format>
198 Specify the information to be displayed. Also see the -o <out‐
199 put_format>, --format=<output_format> option (which supports
200 greater flexibility in formatting, but does not support access
201 to all fields because we ran out of letters). Requests a comma
202 separated list of job information to be displayed.
203 The format of each field is "type[:[.][size][suffix]]"
205 size The minimum field size. If no size is specified, 20
207 characters will be allocated to print the information.
208 . Indicates the output should be right justified and
210 size must be specified. By default, output is left
211 justified.
212 suffix Arbitrary string to append to the end of the field.
214 Valid type specifications include:
216 All Print all fields available in the -o format for this data
218 type with a vertical bar separating each field.
219 AllocMem
221 Prints the amount of allocated memory on a node.
222 AllocNodes
224 Allowed allocating nodes.
225 Available
227 State/availability of a partition.
228 Cluster
230 Print the cluster name if running in a federation.
231 Comment
233 Comment. (Arbitrary descriptive string)
234 Cores Number of cores per socket.
236 CPUs Number of CPUs per node.
238 CPUsLoad
240 CPU load of a node as reported by the OS.
241 CPUsState
243 Number of CPUs by state in the format "allo‐
244 cated/idle/other/total". Do not use this with a node
245 state option ("%t" or "%T") or the different node states
246 will be placed on separate lines.
247 DefaultTime
249 Default time for any job in the format "days-hours:min‐
250 utes:seconds".
251 Disk Size of temporary disk space per node in megabytes.
253 Extra Arbitrary string on the node.
255 Features
257 Features available on the nodes. Also see features_act.
258 features_act
260 Features currently active on the nodes. Also see fea‐
261 tures.
262 FreeMem
264 The total memory, in MB, currently free on the node as
265 reported by the OS. This value is for informational use
266 only and is not used for scheduling.
267 Gres Generic resources (gres) associated with the nodes.
269 GresUsed
271 Generic resources (gres) currently in use on the nodes.
272 Groups Groups which may use the nodes.
274 MaxCPUsPerNode
276 The max number of CPUs per node available to jobs in the
277 partition.
278 Memory Size of memory per node in megabytes.
280 NodeAddr
282 List of node communication addresses.
283 NodeAI Number of nodes by state in the format "allocated/idle".
285 Do not use this with a node state option ("%t" or "%T")
286 or the different node states will be placed on separate
287 lines.
288 NodeAIOT
290 Number of nodes by state in the format "allo‐
291 cated/idle/other/total". Do not use this with a node
292 state option ("%t" or "%T") or the different node states
293 will be placed on separate lines.
294 NodeHost
296 List of node hostnames.
297 NodeList
299 List of node names.
300 Nodes Number of nodes.
302 OverSubscribe
304 Whether jobs may oversubscribe compute resources (e.g.
305 CPUs).
306 Partition
308 Partition name followed by "*" for the default partition,
309 also see %R.
310 PartitionName
312 Partition name, also see %P.
313 Port Node TCP port.
315 PreemptMode
317 Preemption mode.
318 PriorityJobFactor
320 Partition factor used by priority/multifactor plugin in
321 calculating job priority.
322 PriorityTier or Priority
324 Partition scheduling tier priority.
325 Reason The reason a node is unavailable (down, drained, or
327 draining states).
328 Root Only user root may initiate jobs, "yes" or "no".
330 Size Maximum job size in nodes.
332 SocketCoreThread
334 Extended processor information: number of sockets, cores,
335 threads (S:C:T) per node.
336 Sockets
338 Number of sockets per node.
339 StateCompact
341 State of nodes, compact form.
342 StateLong
344 State of nodes, extended form.
345 StateComplete
347 State of nodes, including all node state flags. eg.
348 "idle+cloud+power"
349 Threads
351 Number of threads per core.
352 Time Maximum time for any job in the format "days-hours:min‐
354 utes:seconds".
355 TimeStamp
357 Print the timestamp of the reason a node is unavailable.
358 User Print the user name of who set the reason a node is un‐
360 available.
361 UserLong
363 Print the user name and uid of who set the reason a node
364 is unavailable.
365 Version
367 Print the version of the running slurmd daemon.
368 Weight Scheduling weight of the nodes.
370 --help Print a message describing all sinfo options.
372 --hide Do not display information about hidden partitions. Partitions
374 that are configured as hidden or are not available to the user's
375 group will not be displayed. This is the default behavior.
376 -i, --iterate=<seconds>
378 Print the state on a periodic basis. Sleep for the indicated
379 number of seconds between reports. By default prints a time
380 stamp with the header.
381 --json Dump node information as JSON. All other formatting and filter‐
383 ing arguments will be ignored.
384 -R, --list-reasons
386 List reasons nodes are in the down, drained, fail or failing
387 state. When nodes are in these states Slurm supports the inclu‐
388 sion of a "reason" string by an administrator. This option will
389 display the first 20 characters of the reason field and list of
390 nodes with that reason for all nodes that are, by default, down,
391 drained, draining or failing. This option may be used with
392 other node filtering options (e.g. -r, -d, -t, -n), however,
393 combinations of these options that result in a list of nodes
394 that are not down or drained or failing will not produce any
395 output. When used with -l the output additionally includes the
396 current node state.
397 --local
399 Show only jobs local to this cluster. Ignore other clusters in
400 this federation (if any). Overrides --federation.
401 -l, --long
403 Print more detailed information. This is ignored if the --for‐
404 mat option is specified.
405 --noconvert
407 Don't convert units from their original type (e.g. 2048M won't
408 be converted to 2G).
409 -N, --Node
411 Print information in a node-oriented format with one line per
412 node and partition. That is, if a node belongs to more than one
413 partition, then one line for each node-partition pair will be
414 shown. If --partition is also specified, then only one line per
415 node in this partition is shown. The default is to print infor‐
416 mation in a partition-oriented format. This is ignored if the
417 --format option is specified.
418 -n, --nodes=<nodes>
420 Print information about the specified node(s). Multiple nodes
421 may be comma separated or expressed using a node range expres‐
422 sion (e.g. "linux[00-17]") Limiting the query to just the rele‐
423 vant nodes can measurably improve the performance of the command
424 for large clusters.
425 -h, --noheader
427 Do not print a header on the output.
428 -p, --partition=<partition>
430 Print information only about the specified partition(s). Multi‐
431 ple partitions are separated by commas.
432 -T, --reservation
434 Only display information about Slurm reservations.
435 NOTE: This option causes sinfo to ignore most other options,
437 which are focused on partition and node information.
438 -r, --responding
440 If set only report state information for responding nodes.
441 -S, --sort=<sort_list>
443 Specification of the order in which records should be reported.
444 This uses the same field specification as the <output_format>.
445 Multiple sorts may be performed by listing multiple sort fields
446 separated by commas. The field specifications may be preceded
447 by "+" or "-" for ascending (default) and descending order re‐
448 spectively. The partition field specification, "P", may be pre‐
449 ceded by a "#" to report partitions in the same order that they
450 appear in Slurm's configuration file, slurm.conf. For example,
451 a sort value of "+P,-m" requests that records be printed in or‐
452 der of increasing partition name and within a partition by de‐
453 creasing memory size. The default value of sort is "#P,-t"
454 (partitions ordered as configured then decreasing node state).
455 If the --Node option is selected, the default sort value is "N"
456 (increasing node name).
457 -t, --states=<states>
459 List nodes only having the given state(s). Multiple states may
460 be comma separated and the comparison is case insensitive. If
461 the states are separated by '&', then the nodes must be in all
462 states. Possible values include (case insensitive): ALLOC, AL‐
463 LOCATED, CLOUD, COMP, COMPLETING, DOWN, DRAIN (for node in
464 DRAINING or DRAINED states), DRAINED, DRAINING, FAIL, FUTURE,
465 FUTR, IDLE, MAINT, MIX, MIXED, NO_RESPOND, NPC, PERFCTRS,
466 PLANNED, POWER_DOWN, POWERING_DOWN, POWERED_DOWN, POWERING_UP,
467 REBOOT_ISSUED, REBOOT_REQUESTED, RESV, RESERVED, UNK, and UN‐
468 KNOWN. By default nodes in the specified state are reported
469 whether they are responding or not. The --dead and --responding
470 options may be used to filter nodes by the corresponding flag.
471 -s, --summarize
473 List only a partition state summary with no node state details.
474 This is ignored if the --format option is specified.
475 --usage
477 Print a brief message listing the sinfo options.
478 -v, --verbose
480 Provide detailed event logging through program execution.
481 -V, --version
483 Print version information and exit.
484 --yaml Dump node information as YAML. All other formatting and filter‐
486 ing arguments will be ignored.
487
489 AVAIL Partition state. Can be either up, down, drain, or inact (for
490 INACTIVE). See the partition definition's State parameter in the
491 slurm.conf(5) man page for more information.
492 CPUS Count of CPUs (processors) on these nodes.
494 S:C:T Count of sockets (S), cores (C), and threads (T) on these nodes.
496 SOCKETS
498 Count of sockets on these nodes.
499 CORES Count of cores on these nodes.
501 THREADS
503 Count of threads on these nodes.
504 GROUPS Resource allocations in this partition are restricted to the
506 named groups. all indicates that all groups may use this parti‐
507 tion.
508 JOB_SIZE
510 Minimum and maximum node count that can be allocated to any user
511 job. A single number indicates the minimum and maximum node
512 count are the same. infinite is used to identify partitions
513 without a maximum node count.
514 TIMELIMIT
516 Maximum time limit for any user job in days-hours:minutes:sec‐
517 onds. infinite is used to identify partitions without a job
518 time limit.
519 MEMORY Size of real memory in megabytes on these nodes.
521 NODELIST
523 Names of nodes associated with this particular configuration.
524 NODES Count of nodes with this particular configuration.
526 NODES(A/I)
528 Count of nodes with this particular configuration by node state
529 in the form "allocated/idle".
530 NODES(A/I/O/T)
532 Count of nodes with this particular configuration by node state
533 in the form "allocated/idle/other/total".
534 PARTITION
536 Name of a partition. Note that the suffix "*" identifies the
537 default partition.
538 PORT Local TCP port used by slurmd on the node.
540 ROOT Is the ability to allocate resources in this partition re‐
542 stricted to user root, yes or no.
543 OVERSUBSCRIBE
545 Whether jobs allocated resources in this partition can/will
546 oversubscribe those compute resources (e.g. CPUs). NO indicates
547 resources are never oversubscribed. EXCLUSIVE indicates whole
548 nodes are dedicated to jobs (equivalent to srun --exclusive op‐
549 tion, may be used even with select/cons_res managing individual
550 processors). FORCE indicates resources are always available to
551 be oversubscribed. YES indicates resource may be oversub‐
552 scribed, if requested by the job's resource allocation.
553 NOTE: If OverSubscribe is set to FORCE or YES, the OversubScribe
555 value will be appended to the output.
556 STATE State of the nodes. Possible states include: allocated, com‐
558 pleting, down, drained, draining, fail, failing, future, idle,
559 maint, mixed, perfctrs, planned, power_down, power_up, reserved,
560 and unknown. Their abbreviated forms are: alloc, comp, down,
561 drain, drng, fail, failg, futr, idle, maint, mix, npc, plnd,
562 pow_dn, pow_up, resv, and unk respectively.
563 NOTE: The suffix "*" identifies nodes that are presently not re‐
565 sponding.
566 TMP_DISK
568 Size of temporary disk space in megabytes on these nodes.
569
571 Node state codes are shortened as required for the field size. These
572 node states may be followed by a special character to identify state
573 flags associated with the node. The following node suffixes and states
574 are used:
575 * The node is presently not responding and will not be allocated any
578 new work. If the node remains non-responsive, it will be placed in
579 the DOWN state (except in the case of COMPLETING, DRAINED, DRAIN‐
580 ING, FAIL, FAILING nodes).
581 ~ The node is presently in powered off.
583 # The node is presently being powered up or configured.
585 ! The node is pending power down.
587 % The node is presently being powered down.
589 $ The node is currently in a reservation with a flag value of "main‐
591 tenance".
592 @ The node is pending reboot.
594 ^ The node reboot was issued.
596 - The node is planned by the backfill scheduler for a higher priority
598 job.
599 ALLOCATED The node has been allocated to one or more jobs.
601 ALLOCATED+ The node is allocated to one or more active jobs plus one
603 or more jobs are in the process of COMPLETING.
604 COMPLETING All jobs associated with this node are in the process of
606 COMPLETING. This node state will be removed when all of
607 the job's processes have terminated and the Slurm epilog
608 program (if any) has terminated. See the Epilog parameter
609 description in the slurm.conf(5) man page for more informa‐
610 tion.
611 DOWN The node is unavailable for use. Slurm can automatically
613 place nodes in this state if some failure occurs. System
614 administrators may also explicitly place nodes in this
615 state. If a node resumes normal operation, Slurm can auto‐
616 matically return it to service. See the ReturnToService and
617 SlurmdTimeout parameter descriptions in the slurm.conf(5)
618 man page for more information.
619 DRAINED The node is unavailable for use per system administrator
621 request. See the update node command in the scontrol(1)
622 man page or the slurm.conf(5) man page for more informa‐
623 tion.
624 DRAINING The node is currently executing a job, but will not be al‐
626 located additional jobs. The node state will be changed to
627 state DRAINED when the last job on it completes. Nodes en‐
628 ter this state per system administrator request. See the
629 update node command in the scontrol(1) man page or the
630 slurm.conf(5) man page for more information.
631 FAIL The node is expected to fail soon and is unavailable for
633 use per system administrator request. See the update node
634 command in the scontrol(1) man page or the slurm.conf(5)
635 man page for more information.
636 FAILING The node is currently executing a job, but is expected to
638 fail soon and is unavailable for use per system administra‐
639 tor request. See the update node command in the scon‐
640 trol(1) man page or the slurm.conf(5) man page for more in‐
641 formation.
642 FUTURE The node is currently not fully configured, but expected to
644 be available at some point in the indefinite future for
645 use.
646 IDLE The node is not allocated to any jobs and is available for
648 use.
649 INVAL The node did not register correctly with the controller.
651 This happens when a node registers with less resources than
652 configured in the slurm.conf file. The node will clear
653 from this state with a valid registration (i.e. a slurmd
654 restart is required).
655 MAINT The node is currently in a reservation with a flag value of
657 "maintenance".
658 REBOOT_ISSUED
660 A reboot request has been sent to the agent configured to
661 handle this request.
662 REBOOT_REQUESTED
664 A request to reboot this node has been made, but hasn't
665 been handled yet.
666 MIXED The node has some of its CPUs ALLOCATED while others are
668 IDLE.
669 PERFCTRS (NPC)
671 Network Performance Counters associated with this node are
672 in use, rendering this node as not usable for any other
673 jobs
674 PLANNED The node is planned by the backfill scheduler for a higher
676 priority job.
677 POWER_DOWN The node is pending power down.
679 POWERED_DOWN
681 The node is currently powered down and not capable of run‐
682 ning any jobs.
683 POWERING_DOWN
685 The node is in the process of powering down and not capable
686 of running any jobs.
687 POWERING_UP The node is in the process of being powered up.
689 RESERVED The node is in an advanced reservation and not generally
691 available.
692 UNKNOWN The Slurm controller has just started and the node's state
694 has not yet been determined.
695
697 Executing sinfo sends a remote procedure call to slurmctld. If enough
698 calls from sinfo or other Slurm client commands that send remote proce‐
699 dure calls to the slurmctld daemon come in at once, it can result in a
700 degradation of performance of the slurmctld daemon, possibly resulting
701 in a denial of service.
702 Do not run sinfo or other Slurm client commands that send remote proce‐
704 dure calls to slurmctld from loops in shell scripts or other programs.
705 Ensure that programs limit calls to sinfo to the minimum necessary for
706 the information you are trying to gather.
707
710 Some sinfo options may be set via environment variables. These environ‐
711 ment variables, along with their corresponding options, are listed be‐
712 low. NOTE: Command line options will always override these settings.
713 SINFO_ALL Same as -a, --all
716 SINFO_FEDERATION Same as --federation
718 SINFO_FORMAT Same as -o <output_format>, --format=<output_for‐
720 mat>
721 SINFO_LOCAL Same as --local
723 SINFO_PARTITION Same as -p <partition>, --partition=<partition>
725 SINFO_SORT Same as -S <sort>, --sort=<sort>
727 SLURM_CLUSTERS Same as --clusters
729 SLURM_CONF The location of the Slurm configuration file.
731 SLURM_DEBUG_FLAGS Specify debug flags for sinfo to use. See De‐
733 bugFlags in the slurm.conf(5) man page for a full
734 list of flags. The environment variable takes
735 precedence over the setting in the slurm.conf.
736 SLURM_TIME_FORMAT Specify the format used to report time stamps. A
738 value of standard, the default value, generates
739 output in the form
740 "year-month-dateThour:minute:second". A value of
741 relative returns only "hour:minute:second" if the
742 current day. For other dates in the current year
743 it prints the "hour:minute" preceded by "Tomorr"
744 (tomorrow), "Ystday" (yesterday), the name of the
745 day for the coming week (e.g. "Mon", "Tue", etc.),
746 otherwise the date (e.g. "25 Apr"). For other
747 years it returns a date month and year without a
748 time (e.g. "6 Jun 2012"). All of the time stamps
749 use a 24 hour format.
750 A valid strftime() format can also be specified.
752 For example, a value of "%a %T" will report the day
753 of the week and a time stamp (e.g. "Mon 12:34:56").
754
756 Report basic node and partition configurations:
757 $ sinfo
759 PARTITION AVAIL TIMELIMIT NODES STATE NODELIST
760 batch up infinite 2 alloc adev[8-9]
761 batch up infinite 6 idle adev[10-15]
762 debug* up 30:00 8 idle adev[0-7]
763 Report partition summary information:
766 $ sinfo -s
768 PARTITION AVAIL TIMELIMIT NODES(A/I/O/T) NODELIST
769 batch up infinite 2/6/0/8 adev[8-15]
770 debug* up 30:00 0/8/0/8 adev[0-7]
771 Report more complete information about the partition debug:
774 $ sinfo --long --partition=debug
776 PARTITION AVAIL TIMELIMIT JOB_SIZE ROOT OVERSUBS GROUPS NODES STATE NODELIST
777 debug* up 30:00 8 no no all 8 idle dev[0-7]
778 Report only those nodes that are in state DRAINED:
781 $ sinfo --states=drained
783 PARTITION AVAIL NODES TIMELIMIT STATE NODELIST
784 debug* up 2 30:00 drain adev[6-7]
785 Report node-oriented information with details and exact matches:
788 $ sinfo -Nel
790 NODELIST NODES PARTITION STATE CPUS MEMORY TMP_DISK WEIGHT FEATURES REASON
791 adev[0-1] 2 debug* idle 2 3448 38536 16 (null) (null)
792 adev[2,4-7] 5 debug* idle 2 3384 38536 16 (null) (null)
793 adev3 1 debug* idle 2 3394 38536 16 (null) (null)
794 adev[8-9] 2 batch allocated 2 246 82306 16 (null) (null)
795 adev[10-15] 6 batch idle 2 246 82306 16 (null) (null)
796 Report only down, drained and draining nodes and their reason field:
799 $ sinfo -R
801 REASON NODELIST
802 Memory errors dev[0,5]
803 Not Responding dev8
804
807 Copyright (C) 2002-2007 The Regents of the University of California.
808 Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
809 Copyright (C) 2008-2009 Lawrence Livermore National Security.
810 Copyright (C) 2010-2022 SchedMD LLC.
811 This file is part of Slurm, a resource management program. For de‐
813 tails, see <https://slurm.schedmd.com/>.
814 Slurm is free software; you can redistribute it and/or modify it under
816 the terms of the GNU General Public License as published by the Free
817 Software Foundation; either version 2 of the License, or (at your op‐
818 tion) any later version.
819 Slurm is distributed in the hope that it will be useful, but WITHOUT
821 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
822 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
823 for more details.
824
827 scontrol(1), squeue(1), slurm_load_ctl_conf (3), slurm_load_jobs [22m(3),
828 slurm_load_node [22m(3), slurm_load_partitions (3), slurm_reconfigure (3),
829 slurm_shutdown [22m(3), slurm_update_job [22m(3), slurm_update_node [22m(3),
830 slurm_update_partition (3), slurm.conf(5)
831August 2022 Slurm Commands sinfo(1)