1sbcast(1) Slurm Commands sbcast(1)
2
6 sbcast - transmit a file to the nodes allocated to a Slurm job.
7
10 sbcast [-CfFjpstvV] SOURCE DEST
11
14 sbcast is used to transmit a file to all nodes allocated to the cur‐
15 rently active Slurm job. This command should only be executed from
16 within a Slurm batch job or within the shell spawned after a Slurm
17 job's resource allocation. SOURCE is the name of a file on the current
18 node. DEST should be the fully qualified pathname for the file copy to
19 be created on each node. If a fully qualified pathname is not pro‐
20 vided, the file will be created in the directory specified in the
21 BcastParameters parameter in the slurm.conf file (if available) other‐
22 wise it will be created in the current working directory from which the
23 sbcast command is invoked. DEST should be on a file system local to
24 that node. Note that parallel file systems may provide better perfor‐
25 mance than sbcast can provide, although performance will vary by file
26 size, degree of parallelism, and network type.
27
30 -C, --compress[=library]
31 Compress the file being transmitted. The optional argument
32 specifies the data compression library to be used. Supported
33 values are "lz4" (default) and "none". Some compression li‐
34 braries may be unavailable on some systems. The default com‐
35 pression library (and enabling compression itself) may be set in
36 the slurm.conf file using the BcastParameters option.
37 --exclude=<NONE|path1,...,pathN>
39 Comma-separated list of absolute directory paths to be excluded
40 when autodetecting and broadcasting executable shared object de‐
41 pendencies. If the keyword "NONE" is configured, no directory
42 paths will be excluded. The default value is that of slurm.conf
43 BcastExclude and this option overrides it. See also --send-libs.
44 -F, --fanout=<number>
46 Specify the fanout of messages used for file transfer. Maximum
47 value is currently eight.
48 -f, --force
50 If the destination file already exists, replace it.
51 -j, --jobid=<jobID[.stepID]>
53 Specify the job ID to use with optional step ID. If run inside
54 an allocation this is unneeded as the job ID will read from the
55 environment.
56 -p, --preserve
58 Preserves modification times, access times, and modes from the
59 original file.
60 --send-libs[=yes|no]
62 If set to yes (or no argument), autodetect and broadcast the ex‐
63 ecutable's shared object dependencies to allocated compute
64 nodes. The files are placed in a directory alongside the exe‐
65 cutable. This overrides the default behavior configured in
66 slurm.conf SbcastParameters send_libs. See also --exclude.
67 -s, --size=<size>
69 Specify the block size used for file broadcast. The size can
70 have a suffix of k or m for kilobytes or megabytes respectively
71 (defaults to bytes). This size subject to rounding and range
72 limits to maintain good performance. The default value is the
73 file size or 8MB, whichever is smaller. This value may need to
74 be set on systems with very limited memory.
75 -t, --timeout=<seconds>
77 Specify the message timeout in seconds. The default value is
78 MessageTimeout as reported by "scontrol show config". Setting a
79 higher value may be necessitated by relatively slow I/O perfor‐
80 mance on the compute node disks.
81 -v, --verbose
83 Provide detailed event logging through program execution.
84 -V, --version
86 Print version information and exit.
87
89 Executing sbcast sends a remote procedure call to slurmctld. If enough
90 calls from sbcast or other Slurm client commands that send remote pro‐
91 cedure calls to the slurmctld daemon come in at once, it can result in
92 a degradation of performance of the slurmctld daemon, possibly result‐
93 ing in a denial of service.
94 Do not run sbcast or other Slurm client commands that send remote pro‐
96 cedure calls to slurmctld from loops in shell scripts or other pro‐
97 grams. Ensure that programs limit calls to sbcast to the minimum neces‐
98 sary for the information you are trying to gather.
99
102 Some sbcast options may be set via environment variables. These envi‐
103 ronment variables, along with their corresponding options, are listed
104 below. (Note: Command line options will always override these set‐
105 tings.)
106 SBCAST_COMPRESS -C, --compress
109 SBCAST_EXCLUDE --exclude=<NONE|path1,...,pathN>
111 SBCAST_FANOUT -F number, --fanout=number
113 SBCAST_FORCE -f, --force
115 SBCAST_SEND_LIBS --send-libs[=yes|no]
117 SBCAST_PRESERVE -p, --preserve
119 SBCAST_SIZE -s size, --size=size
121 SBCAST_TIMEOUT -t seconds, --timeout=seconds
123 SLURM_CONF The location of the Slurm configuration file.
125
127 When using SlurmDBD, users who have an AdminLevel defined (Operator or
128 Admin) are given the authority to invoke sbcast on other users jobs.
129
132 Using a batch script, transmit local file my.prog to /tmp/my.proc on
133 the local nodes and then execute it.
134 $ cat my.job
136 #!/bin/bash
137 sbcast my.prog /tmp/my.prog
138 srun /tmp/my.prog
139 $ sbatch --nodes=8 my.job
141 srun: jobid 12345 submitted
142
145 Copyright (C) 2006-2010 The Regents of the University of California.
146 Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
147 Copyright (C) 2010-2022 SchedMD LLC.
148 This file is part of Slurm, a resource management program. For de‐
150 tails, see <https://slurm.schedmd.com/>.
151 Slurm is free software; you can redistribute it and/or modify it under
153 the terms of the GNU General Public License as published by the Free
154 Software Foundation; either version 2 of the License, or (at your op‐
155 tion) any later version.
156 Slurm is distributed in the hope that it will be useful, but WITHOUT
158 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
159 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
160 for more details.
161
164 srun(1)
165August 2022 Slurm Commands sbcast(1)