1zts-php(1) Scripting Language zts-php(1)
2
6 zts-php - PHP Command Line Interface 'CLI'
7 zts-php-cgi - PHP Common Gateway Interface 'CGI' command
9
11 zts-php [options] [ -f ] file [[--] args...]
12 zts-php [options] -r code [[--] args...]
14 zts-php [options] [-B begin_code] -R code [-E end_code] [[--] args...]
16 zts-php [options] [-B begin_code] -F file [-E end_code] [[--] args...]
18 zts-php [options] -- [ args...]
20 zts-php [options] -a
22 zts-php [options] -S addr:port [-t docroot]
24
26 PHP is a widely-used general-purpose scripting language that is espe‐
27 cially suited for Web development and can be embedded into HTML. This
28 is the command line interface that enables you to do the following:
29 You can parse and execute files by using parameter -f followed by the
31 name of the file to be executed.
32 Using parameter -r you can directly execute PHP code simply as you
34 would do inside a .php file when using the eval() function.
35 It is also possible to process the standard input line by line using
37 either the parameter -R or -F. In this mode each separate input line
38 causes the code specified by -R or the file specified by -F to be exe‐
39 cuted. You can access the input line by $argn. While processing the
40 input lines $argi contains the number of the actual line being pro‐
41 cessed. Further more the parameters -B and -E can be used to execute
42 code (see -r) before and after all input lines have been processed re‐
43 spectively. Notice that the input is read from STDIN and therefore
44 reading from STDIN explicitly changes the next input line or skips in‐
45 put lines.
46 PHP also contains an built-in web server for application development
48 purpose. By using the -S option where addr:port point to a local ad‐
49 dress and port PHP will listen to HTTP requests on that address and
50 port and serve files from the current working directory or the docroot
51 passed by the -t option.
52 If a PHP file is provided to the command line when the built-in web
54 server is used, it will be used as the router script. This script will
55 be started at each HTTP request. The script output is returned to the
56 browser, unless the router script returns the false value. If so, the
57 built-in server falls back to the default behaviour, returning the re‐
58 quested resource as-is by looking up the files relative to the document
59 root specified by the -t option, if provided.
60 If none of -r -f -B -R -F -E or -S is present but a single parameter is
62 given then this parameter is taken as the filename to parse and execute
63 (same as with -f). If no parameter is present then the standard input
64 is read and executed.
65
67 --interactive
68 -a Run PHP interactively. This lets you enter snippets of
69 PHP code that directly get executed. When readline sup‐
70 port is enabled you can edit the lines and also have
71 history support.
72 --bindpath address:port|port
74 -b address:port|port
75 Bind Path for external FASTCGI Server mode (CGI only).
76 --no-chdir
78 -C Do not chdir to the script's directory (CGI only).
79 --no-header
81 -q Quiet-mode. Suppress HTTP header output (CGI only).
82 --timing count
84 -T count Measure execution time of script repeated count times
85 (CGI only).
86 --php-ini path|file
88 -c path|file Look for php.ini file in the directory path or use the
89 specified file
90 --no-php-ini
92 -n No php.ini file will be used
93 --define foo[=bar]
95 -d foo[=bar] Define INI entry foo with value bar
96 -e Generate extended information for debugger/profiler
98 --file file
100 -f file Parse and execute file
101 --help
103 -h This help
104 --hide-args
106 -H Hide script name (file) and parameters (args...) from
107 external tools. For example you may want to use this
108 when a php script is started as a daemon and the command
109 line contains sensitive data such as passwords.
110 --info
112 -i PHP information and configuration
113 --syntax-check
115 -l Syntax check only (lint)
116 --modules
118 -m Show compiled in modules
119 --run code
121 -r code Run PHP code without using script tags '<?..?>'
122 --process-begin code
124 -B begin_code Run PHP begin_code before processing input lines
125 --process-code code
127 -R code Run PHP code for every input line
128 --process-file file
130 -F file Parse and execute file for every input line
131 --process-end code
133 -E end_code Run PHP end_code after processing all input lines
134 --syntax-highlight
136 -s Output HTML syntax highlighted source
137 --server addr:port
139 -S addr:port Start built-in web server on the given local address and
140 port
141 --docroot docroot
143 -t docroot Specify the document root to be used by the built-in web
144 server
145 --version
147 -v Version number
148 --strip
150 -w Output source with stripped comments and whitespace
151 --zend-extension file
153 -z file Load Zend extension file
154 args... Arguments passed to script. Use '--' args when first ar‐
156 gument starts with '-' or script is read from stdin
157 --rfunction name
159 --rf name Shows information about function name
160 --rclass name
162 --rc name Shows information about class name
163 --rextension name
165 --re name Shows information about extension name
166 --rzendextension
168 name
169 --rz name Shows information about Zend extension name
170 --rextinfo name
172 --ri name Shows configuration for extension name
173 --ini Show configuration file names
175
177 php-cli.ini The configuration file for the CLI version of PHP.
178 php.ini The standard configuration file will only be used when
180 php-cli.ini cannot be found.
181
183 zts-php -r 'echo "Hello World\n";'
184 This command simply writes the text "Hello World" to standard out.
185 zts-php -r 'print_r(gd_info());'
187 This shows the configuration of your gd extension. You can use
188 this to easily check which image formats you can use. If you have
189 any dynamic modules you may want to use the same ini file that php
190 uses when executed from your webserver. There are more extensions
191 which have such a function. For dba use:
192 zts-php -r 'print_r(dba_handlers(1));'
193 zts-php -R 'echo strip_tags($argn)."\n";'
195 This PHP command strips off the HTML tags line by line and outputs
196 the result. To see how it works you can first look at the follow‐
197 ing PHP command ´php -d html_errors=1 -i´ which uses PHP to output
198 HTML formatted configuration information. If you then combine
199 those two ´php ...|php ...´ you'll see what happens.
200 zts-php -E 'echo "Lines: $argi\n";'
202 Using this PHP command you can count the lines being input.
203 zts-php -R '@$l+=count(file($argn));' -E 'echo "Lines:$l\n";'
205 In this example PHP expects each input line being a file. It
206 counts all lines of the files specified by each input line and
207 shows the summarized result. You may combine this with tools like
208 find and change the php scriptlet.
209 zts-php -R 'echo "$argn\n"; fgets(STDIN);'
211 Since you have access to STDIN from within -B -R -F and -E you can
212 skip certain input lines with your code. But note that in such
213 cases $argi only counts the lines being processed by php itself.
214 Having read this you will guess what the above program does: skip‐
215 ping every second input line.
216
218 You can use a shebang line to automatically invoke php from scripts.
219 Only the CLI version of PHP will ignore such a first line as shown be‐
220 low:
221 #!/bin/php
223 <?php
224 // your script
225 ?>
226
228 For a more or less complete description of PHP look here:
229 http://www.php.net/manual/
230
232 You can view the list of known bugs or report any new bug you found at:
233 https://github.com/php/php-src/issues
234
236 The PHP Group: Thies C. Arntzen, Stig Bakken, Andi Gutmans, Rasmus Ler‐
237 dorf, Sam Ruby, Sascha Schumann, Zeev Suraski, Jim Winstead, Andrei
238 Zmievski.
239 Additional work for the CLI sapi was done by Edin Kadribasic, Marcus
241 Boerger and Johannes Schlueter.
242 A List of active developers can be found here:
244 http://www.php.net/credits.php
245 And last but not least PHP was developed with the help of a huge amount
247 of contributors all around the world.
248
250 This manpage describes php, version 8.2.13.
251
253 Copyright © The PHP Group
254 This source file is subject to version 3.01 of the PHP license, that is
256 bundled with this package in the file LICENSE, and is available through
257 the world-wide-web at the following url:
258 https://www.php.net/license/3_01.txt
259 If you did not receive a copy of the PHP license and are unable to ob‐
261 tain it through the world-wide-web, please send a note to li‐
262 cense@php.net so we can mail you a copy immediately.
263The PHP Group 2022 zts-php(1)