1v.lidar.growing(1)          GRASS GIS User's Manual         v.lidar.growing(1)
2
3
4

NAME

6       v.lidar.growing   -  Building  contour determination and Region Growing
7       algorithm for determining the building inside
8

KEYWORDS

10       vector, LIDAR
11

SYNOPSIS

13       v.lidar.growing
14       v.lidar.growing --help
15       v.lidar.growing   input=name   output=name    first=name     [tj=float]
16       [td=float]   [--overwrite]  [--help]  [--verbose]  [--quiet]  [--ui]
17
18   Flags:
19       --overwrite
20           Allow output files to overwrite existing files
21
22       --help
23           Print usage summary
24
25       --verbose
26           Verbose module output
27
28       --quiet
29           Quiet module output
30
31       --ui
32           Force launching GUI dialog
33
34   Parameters:
35       input=name [required]
36           Name of input vector map
37           Input vector (v.lidar.edgedetection output)
38
39       output=name [required]
40           Name for output vector map
41
42       first=name [required]
43           Name of the first pulse vector map
44
45       tj=float
46           Threshold for cell object frequency in region growing
47           Default: 0.2
48
49       td=float
50           Threshold for double pulse in region growing
51           Default: 0.6
52

DESCRIPTION

54       v.lidar.growing is the second of three steps to filter LiDAR data.  The
55       filter aims to recognize and extract attached and detached object (such
56       as  buildings, bridges, power lines,  trees, etc.) in order to create a
57       Digital Terrain Model.
58       The modules identifies which is the internal area of every object on  a
59       LiDAR point surface. The classification categories from v.lidar.edgede‐
60       tection are now rasterized. For each cell, it is evaluated if  it  (the
61       cell)  contains  a  point  with  double impulse (difference between the
62       first and last pulse greater than a  given  threshold).  Starting  from
63       cells classified as OBJECT and with only one pulse all linked cells are
64       selected and a convex hull algorithm is  applied  to  them.  Simultane‐
65       ously,  the  mean  of  the corresponding heights (mean edge height) are
66       computed.  Points inside the convex hull are classified  as  OBJECT  if
67       their  height  is greater than or equal to the previously mean computed
68       edge height. This last step is done only in case  of  high  planimetric
69       resolution.
70

NOTES

72       The  input  data  should be the output result of the v.lidar.edgedetec‐
73       tion, module. Otherwise, it goes to error! The output  of  this  module
74       will  be  the  input of v.lidar.correction module. The output will be a
75       vector map which points are pre-classified as:
76       TERRAIN SINGLE PULSE (cat = 1, layer = 2)
77       TERRAIN DOUBLE PULSE (cat = 2, layer = 2)
78       OBJECT SINGLE PULSE (cat = 3, layer = 2)
79       OBJECT DOUBLE PULSE (cat = 4, layer = 2)
80       The final result of the whole procedure  (v.lidar.edgedetection,  v.li‐
81       dar.growing,  v.lidar.correction) will be a point classification in the
82       same categories as above.
83

EXAMPLES

85   Basic region growing procedure
86       v.lidar.growing input=edge output=growing first=firstpulse
87

REFERENCES

89       Antolin, R. et al., 2006. Digital terrain models determination by LiDAR
90       technology:  Po  basin experimentation. Bolletino di Geodesia e Scienze
91       Affini, anno LXV, n. 2, pp. 69-89.
92
93       Brovelli M. A., Cannata M., Longoni U.M., 2004.  LIDAR  Data  Filtering
94       and  DTM  Interpolation  Within GRASS, Transactions in GIS, April 2004,
95       vol. 8, iss. 2, pp. 155-174(20), Blackwell Publishing Ltd.
96
97       Brovelli M. A., Cannata M., 2004. Digital Terrain model  reconstruction
98       in  urban  areas  from  airborne laser scanning data: the method and an
99       example for Pavia (Northern Italy). Computers and Geosciences 30 (2004)
100       pp.325-331
101
102       Brovelli  M.  A.  and Longoni U.M., 2003. Software per il filtraggio di
103       dati LIDAR, Rivista dell?Agenzia del Territorio, n. 3-2003,  pp.  11-22
104       (ISSN 1593-2192).
105
106       Brovelli  M.  A.,  Cannata M. and Longoni U.M., 2002. DTM LIDAR in area
107       urbana, Bollettino SIFET N.2, pp. 7-26.
108
109       Performances of the filter can be seen in the ISPRS WG III/3 Comparison
110       of Filters report by Sithole, G. and Vosselman, G., 2003.
111

SEE ALSO

113        v.lidar.edgedetection, v.lidar.correction, v.surf.bspline, v.surf.rst,
114       v.in.lidar, v.in.ascii
115

AUTHORS

117       Original version of program in GRASS 5.4:
118       Maria Antonia Brovelli, Massimiliano Cannata, Ulisse Longoni and  Mirko
119       Reguzzoni
120
121       Update for GRASS 6.X:
122       Roberto Antolin and Gonzalo Moreno
123

SOURCE CODE

125       Available at: v.lidar.growing source code (history)
126
127       Accessed: Saturday Jan 21 20:39:55 2023
128
129       Main  index  | Vector index | Topics index | Keywords index | Graphical
130       index | Full index
131
132       © 2003-2023 GRASS Development Team, GRASS GIS 8.2.1 Reference Manual
133
134
135
136GRASS 8.2.1                                                 v.lidar.growing(1)