1personality(2)                System Calls Manual               personality(2)
2
3
4

NAME

6       personality - set the process execution domain
7

LIBRARY

9       Standard C library (libc, -lc)
10

SYNOPSIS

12       #include <sys/personality.h>
13
14       int personality(unsigned long persona);
15

DESCRIPTION

17       Linux  supports different execution domains, or personalities, for each
18       process.  Among other things, execution domains tell Linux how  to  map
19       signal numbers into signal actions.  The execution domain system allows
20       Linux to provide limited support  for  binaries  compiled  under  other
21       UNIX-like operating systems.
22
23       If persona is not 0xffffffff, then personality() sets the caller's exe‐
24       cution domain to the value specified by persona.  Specifying persona as
25       0xffffffff  provides  a  way  of retrieving the current persona without
26       changing it.
27
28       A list of the available execution domains can be found in  <sys/person‐
29       ality.h>.   The  execution  domain  is  a 32-bit value in which the top
30       three bytes are set aside for flags that cause the kernel to modify the
31       behavior  of certain system calls so as to emulate historical or archi‐
32       tectural quirks.  The least significant byte is a  value  defining  the
33       personality the kernel should assume.  The flag values are as follows:
34
35       ADDR_COMPAT_LAYOUT (since Linux 2.6.9)
36              With this flag set, provide legacy virtual address space layout.
37
38       ADDR_NO_RANDOMIZE (since Linux 2.6.12)
39              With this flag set, disable address-space-layout randomization.
40
41       ADDR_LIMIT_32BIT (since Linux 2.2)
42              Limit the address space to 32 bits.
43
44       ADDR_LIMIT_3GB (since Linux 2.4.0)
45              With  this  flag  set,  use 0xc0000000 as the offset at which to
46              search  a  virtual  memory  chunk  on  mmap(2);  otherwise   use
47              0xffffe000.
48
49       FDPIC_FUNCPTRS (since Linux 2.6.11)
50              User-space  function  pointers to signal handlers point (on cer‐
51              tain architectures) to descriptors.
52
53       MMAP_PAGE_ZERO (since Linux 2.4.0)
54              Map page 0 as read-only (to support binaries that depend on this
55              SVr4 behavior).
56
57       READ_IMPLIES_EXEC (since Linux 2.6.8)
58              With this flag set, PROT_READ implies PROT_EXEC for mmap(2).
59
60       SHORT_INODE (since Linux 2.4.0)
61              No effects(?).
62
63       STICKY_TIMEOUTS (since Linux 1.2.0)
64              With  this  flag set, select(2), pselect(2), and ppoll(2) do not
65              modify the returned timeout argument when interrupted by a  sig‐
66              nal handler.
67
68       UNAME26 (since Linux 3.1)
69              Have  uname(2) report a 2.6.40+ version number rather than a 3.x
70              version number.  Added as a stopgap measure  to  support  broken
71              applications  that could not handle the kernel version-numbering
72              switch from Linux 2.6.x to Linux 3.x.
73
74       WHOLE_SECONDS (since Linux 1.2.0)
75              No effect.
76
77       The available execution domains are:
78
79       PER_BSD (since Linux 1.2.0)
80              BSD. (No effects.)
81
82       PER_HPUX (since Linux 2.4)
83              Support for 32-bit HP/UX.  This support was never complete,  and
84              was dropped so that since Linux 4.0, this value has no effect.
85
86       PER_IRIX32 (since Linux 2.2)
87              IRIX 5 32-bit.  Never fully functional; support dropped in Linux
88              2.6.27.  Implies STICKY_TIMEOUTS.
89
90       PER_IRIX64 (since Linux 2.2)
91              IRIX 6 64-bit.  Implies STICKY_TIMEOUTS; otherwise no effects.
92
93       PER_IRIXN32 (since Linux 2.2)
94              IRIX 6 new 32-bit.  Implies STICKY_TIMEOUTS;  otherwise  no  ef‐
95              fects.
96
97       PER_ISCR4 (since Linux 1.2.0)
98              Implies STICKY_TIMEOUTS; otherwise no effects.
99
100       PER_LINUX (since Linux 1.2.0)
101              Linux.
102
103       PER_LINUX32 (since Linux 2.2)
104              [To be documented.]
105
106       PER_LINUX32_3GB (since Linux 2.4)
107              Implies ADDR_LIMIT_3GB.
108
109       PER_LINUX_32BIT (since Linux 2.0)
110              Implies ADDR_LIMIT_32BIT.
111
112       PER_LINUX_FDPIC (since Linux 2.6.11)
113              Implies FDPIC_FUNCPTRS.
114
115       PER_OSF4 (since Linux 2.4)
116              OSF/1  v4.  On alpha, clear top 32 bits of iov_len in the user's
117              buffer for  compatibility  with  old  versions  of  OSF/1  where
118              iov_len was defined as.  int.
119
120       PER_OSR5 (since Linux 2.4)
121              Implies STICKY_TIMEOUTS and WHOLE_SECONDS; otherwise no effects.
122
123       PER_RISCOS (since Linux 2.2)
124              [To be documented.]
125
126       PER_SCOSVR3 (since Linux 1.2.0)
127              Implies  STICKY_TIMEOUTS, WHOLE_SECONDS, and SHORT_INODE; other‐
128              wise no effects.
129
130       PER_SOLARIS (since Linux 2.4)
131              Implies STICKY_TIMEOUTS; otherwise no effects.
132
133       PER_SUNOS (since Linux 2.4.0)
134              Implies STICKY_TIMEOUTS.   Divert  library  and  dynamic  linker
135              searches  to  /usr/gnemul.  Buggy, largely unmaintained, and al‐
136              most entirely unused; support was removed in Linux 2.6.26.
137
138       PER_SVR3 (since Linux 1.2.0)
139              Implies STICKY_TIMEOUTS and SHORT_INODE; otherwise no effects.
140
141       PER_SVR4 (since Linux 1.2.0)
142              Implies STICKY_TIMEOUTS and  MMAP_PAGE_ZERO;  otherwise  no  ef‐
143              fects.
144
145       PER_UW7 (since Linux 2.4)
146              Implies  STICKY_TIMEOUTS  and  MMAP_PAGE_ZERO;  otherwise no ef‐
147              fects.
148
149       PER_WYSEV386 (since Linux 1.2.0)
150              Implies STICKY_TIMEOUTS and SHORT_INODE; otherwise no effects.
151
152       PER_XENIX (since Linux 1.2.0)
153              Implies STICKY_TIMEOUTS and SHORT_INODE; otherwise no effects.
154

RETURN VALUE

156       On success, the previous persona is returned.   On  error,  -1  is  re‐
157       turned, and errno is set to indicate the error.
158

ERRORS

160       EINVAL The kernel was unable to change the personality.
161

STANDARDS

163       Linux.
164

HISTORY

166       Linux 1.1.20, glibc 2.3.
167

SEE ALSO

169       setarch(8)
170
171
172
173Linux man-pages 6.04              2023-03-30                    personality(2)
Impressum