1davfs2.conf(5) 1.7.0 davfs2.conf(5)
2
6 davfs2.conf - Configuration file for mount.davfs
7
11 There is a system wide configuration file /etc/davfs2/davfs2.conf and
12 user configuration files ~/.davfs2/davfs2.conf. When mount.davfs is in‐
13 voked by root, only the system wide configuration file is read. When
14 invoked by an ordinary user, the user configuration file is read in ad‐
15 dition. Settings from the user configuration file will take precedence
16 over the system wide configuration.
17 The configuration file consists of lines where each line contains a
20 keyword value pair. Keyword and value are separated by spaces and/or
21 tabs.
22 The file may contain sections that are for one specific mount point
25 only. Such a section starts with a line, that contains the full path
26 of the mount point enclosed in square brackets. The section ends at the
27 start of the next section or the end of file. Options that shall apply
28 to all mounted file system must come before the first sections. Options
29 given in a mount specific section will have precedence.
30
34 proxy foo.bar:8080
35 use_locks 0
36 [/media/dav]
37 use_locks 1
38 [/home/otto/mywebspace]
39 gui_optimize 1
40 All mounted davfs2 file systems will use the proxy foo.bar. All davfs2
43 file systems except /media/dav will disable the use of the locks.
44 /home/otto/mywebspace will use the gui_optimize option.
45
48 Lines that only contain spaces and tabs (empty lines) are ignored.
49 # indicates a comment. The rest of the line is ignored.
52 \ is the escape character.
55 "" is used for quotation.
58 If a value contains one of the special characters space, tab, #, \, or
61 ", this character must be escaped by a preceding \. Use ’\ ’ instead of
62 ’ ’, ’\#’ instead of ’#’, ’\\’ instead of ’\’ and ’\"’ instead of ’"’.
63 Values containing spaces, tabs or # may instead be enclosed in double
66 quotes. But " and ’ must be escaped even within double quotes. If the
67 starting line of a section is enclosed in double quotes, the square
68 brakets must be within the quotes (like "[/home/otto/with space]").
69 Boolean option values (yes/no) must be given as numerical value. 0 for
72 no, 1 for yes.
73
78 dav_user
79 When invoked by root the mount.davfs daemon will run as this
80 user. Value must be given as name, not as numerical id.
81 Default: davfs2
82 Only allowed in the system wide configuration file.
83 dav_group
86 The group of the running mount.davfs daemon. Ordinary users must
87 be member of this group in order to mount a davfs2 file system.
88 Value must be given as name, not as numerical id.
89 Default: davfs2
90 Only allowed in the system wide configuration file.
91 buf_size
94 Size in KiByte of the buffer used to communicate with the kernel
95 file system. Only useful with fuse, where read and write opera‐
96 tions may profit from a larger buffer.
97 Default: 16
98
102 use_proxy
103 Whether to use a proxy to connect to the WebDAV server. 0 = no,
104 1 = yes. If no proxy is defined in the configration file or the
105 environment variables https_proxy, http_proxy and all_proxy,
106 this option has no effect.
107 Default: 1
108 Only allowed in the system wide configuration file.
109 proxy Name of the proxy. The name must be the fully qualified domain
112 name (no scheme). If the proxy port differs from the default of
113 8080, it must be appended, separated by a colon. Examples:
114 foo.bar:1704 or foo.bar
115 Only allowed in the system wide configuration file.
116 trust_ca_cert
119 Name of a certificate file in PEM format. The name of the file
120 may be given as absolute path or as file name only. In the lat‐
121 ter case the directories ~/.davfs2/certs and /etc/davfs2/certs
122 will be searched.
123 This option is useful when the certificate presented by the
124 server cannot be verified using the system's data base of
125 trusted certificate authorities (CA). The certificate file must
126 contain the self-signed certificate of the top level CA in the
127 chain of trust. It may be a self-signed server certificate (but
128 see also trust_server_cert). With this option the system's CA
129 data base is ignored.
130 Note: Even if the server's certificate is trusted that does not
131 mean it is accepted. Additionally the certificate's date must be
132 valid and either the CommonName or the SubjectAltName must match
133 the host name of the server.
134 servercert
137 Same as trust_ca_cert but badly named.
138 Deprecated
139 trust_server_cert
142 Name of a certificate file in PEM format. The name of the file
143 may be given as absolute path or as file name only. In the lat‐
144 ter case the directories ~/.davfs2/certs and /etc/davfs2/certs
145 will be searched.
146 Useful when the server's certificate can't be verified or is
147 even invalid, but you know that you can trust this certificate.
148 When the server presents a certificate that is exactly equal to
149 this one and when the server is able to authenticate against the
150 public key contained in this certificate the connection will be
151 established.
152 This is the preferred option for self signed server certifi‐
153 cates.
154 No other ways to verify the certificate will be tried and the
155 certificate will not be checked for validity.
156 clientcert
159 Name of a certificate in PKCS#12 format that will be used to au‐
160 thenticate with the server. The name of the file may be given as
161 absolute path or as file name only. In the latter case the di‐
162 rectories ~/.davfs2/certs/private and /etc/davfs2/certs/private
163 will be searched.
164 Warning: If the client certificate is issued by an intermediary
165 CA and not by a top level CA then the TLS-specification requires
166 the client to send the complete chain of certificates (without
167 the top level CA-certificate). davfs2 only sends the client cer‐
168 tificate. To work around this bug the server must store and
169 trust the complete chain of CA-certificates down to the one CA
170 that isssued the client certificate.
171 secrets
174 Name of a file that holds the credentials for servers and the
175 proxy, and passwords to decrypt the client certificate. The name
176 must be an absolute path. The file must be read and writable by
177 the owner only (mode 600).
178 Default: ~/.davfs2/secrets
179 Only allowed in the user configuration file. The system wide se‐
180 crets file is always /etc/davfs2/secrets.
181 ask_auth
184 Ask the user interactively for credentials and passwords if not
185 found in the secretsfile. Ask the user if a servercert cannot be
186 verified. 0 = no, 1 = yes.
187 Default: 1
188 use_locks
191 Whether to lock files on the server when they are opened for
192 writing. 0 = no, 1 = yes.
193 Default: 1
194 lock_owner
197 A string send to the server to identify the owner of a lock. If
198 a WebDAV resource is used at the same time by different clients
199 using the same credentials, different values for lock_owner
200 should be chosen.
201 Default: the username from the credentials
202 lock_timeout
205 How long in seconds locks should be valid, before the server re‐
206 moves them. The server may ignore this and set its own timeout
207 value.
208 Default: 1800
209 lock_refresh
212 That many seconds before the lock times out, mount.davfs will
213 try to refresh the lock. The value should be substantially
214 greater than delay_upload.
215 Default: 60
216 use_expect100
219 To avoid uploading big files that will be refused by the
220 server, mount.davfs uses the header expect: 100-continue to get
221 the o.k. from the server before uploading. Not all servers un‐
222 derstand this. 0 = no, 1 = yes.
223 Default: 0
224 if_match_bug
227 Some servers do not handle If-Match and If-None-Match-headers
228 correctly. This otion tells mount.davfs to use HEAD instead of
229 thes headers. 0 = no, 1 = yes.
230 Default: 0
231 drop_weak_etags
234 Popular servers send a weak etag whenever they are not able to
235 calculate a strong one. This weak etag will never be valid, but
236 after one second it is silently turned into a strong, valid
237 etag. With this flag set to 1, mount.davfs will never use this
238 weak etags. If the flag is 0, the weakness indicator will be re‐
239 moved and the etag is assumed to be strong. There is some danger
240 of the Lost-Update-Problem with this. But it is minimized when
241 using locks.
242 You should turn this on, when you can't use locks and there is
243 the danger of concurrent access to the same resource. In this
244 case the etag is not used at all and the resource cannot be
245 cached.
246 0 = no, 1 = yes.
247 Default: 0
248 n_cookies
251 Some servers will only work when they are allowed to set a
252 cookie and this cookie is returned in subsequent requests. This
253 option sets the number of cookies you are willing to accept and
254 include in subsequent requests. davfs2 will only care for the
255 name and the value of the cookie and ignore all of the possible
256 attributes.
257 Default: 0
258 precheck
261 If option if_match_bug is set: use HEAD-requests to check for
262 existence or modification of a file to avoid unintended over‐
263 writing what somebody else changed. Has no effect if option
264 if_match_bug is 0. You should only set it 0, if there is no con‐
265 current access to the server. 0 = no, 1 = yes.
266 Default: 1
267 ignore_dav_header
270 Some servers send wrong information about their capabilities in
271 the DAV-header. In this case the header should be ignored.
272 Default: 0
273 use_compression
276 Use gzip-compression for downloading files, if supported by the
277 server. Uploads will still be uncompressed.
278 Default: 0
279 min_propset
282 Some servers are reported to significantly slow down when the
283 Etag and Last-Modified properties are requested. This option
284 will reduce the set of WebDAV-properties requested from the
285 server to the minimal set. Don't use it if your file system is
286 used for reading and writing. Without Etag or Last-Modified
287 davfs2 will not be able to check for changes on the server which
288 may result in unnecessary downloads and lost updates. This op‐
289 tion will also effectively disable caching of files because
290 files in the cache can't be reused.
291 Default: 0
292 follow_redirect
295 If the server redirects a GET-request to a different resource
296 (maybe on a different server) then follow this redirection.
297 Currently there are some restrictions: all redirects are treated
298 as temporary redirects; if the new server requires authentica‐
299 tion then the same credentials are use as for the original
300 server; if the connection is over TLS the server certificate
301 will be checked against the trusted CAs known by the system;
302 user configured server certificates and client certificates are
303 not used for the new server.
304 Default: 0
305 sharepoint_href_bug
308 SharePoint does not properly encode UTF8-characters within the
309 href-element. Because of this some files are invisible because
310 the href-element violates the rules. Neon 0.31 and newer has a
311 workaround for this SharePoint bug. This option will activate
312 this workaround.
313 Default: 0
314 server_charset
317 When extracting file names from the path component of the URL,
318 mount.davfs will assume they are encoded using this character
319 set and translate file names to the local character set. This is
320 not about encoding of file contents and not about HTTP escaping
321 rules.
322 There is no means in HTTP to know the character encoding of the
323 path component. There may be even different encodings within the
324 same path, as the encoding of file names is often defined by the
325 clients that created them. Nowadays it is best to use only
326 UTF-8 encoding and to do no conversion. If you are not sure that
327 all clients understand UTF-8, restrict file names to pure
328 us-ascii. Never use characters in file names, that may have a
329 special function on some operating systems (like /, : and \).
330 Default: no character set conversion
331 connect_timeout
334 When creating a TCP connection to the server mount.davfs will
335 wait that many seconds for an answer before assuming an error.
336 If a value of '0' is used then no explicit timeout handling is
337 set and the connect call will only timeout as dictated by the
338 TCP stack.
339 This parameter only takes effect if the version of neon in use
340 (neon version > 0.26) and the OS support non-blocking I/O.
341 Default: 10
342 read_timeout
345 How long in seconds mount.davfs will wait for an answer from the
346 server before assuming an error.
347 Default: 30
348 retry When mount.davfs can not reach the server it will try again af‐
351 ter retry seconds. For subsequent retries the interval will be
352 increased up to max_retry seconds.
353 Default: 30
354 max_retry
357 Maximum value of the retry interval.
358 Default: 300
359 max_upload_attempts
362 When uploading a changed file fails temporarily mount.davfs will
363 retry with increasing intervals, but not more often than this.
364 With a bad connection this will cause additional traffic. To re‐
365 duce traffic caused by unsuccessful attempts option use_ex‐
366 pect100 can be set. But please test it. Most proxies and some
367 servers don't support this header.
368 Default: 15
369 add_header
372 Your server might expect special headers to do what you want.
373 Different from other options, this one takes two values: the
374 name of the header and its value. Some ASP-backends to IIS seem
375 to require the Microsoft specific header "Translate: F". You can
376 add it like this:
377 add_header Translate F
378 mount.davfs will add header "Translate: F" on all requests.
379 This option is cumulative. You can enter more than one
380 add_header option and all of them will be added. Also add_header
381 options from /etc/davfs2/davfs2.conf and ~/.davfs2/davfs2.conf
382 are merged.
383
387 backup_dir
388 Each mounted davfs2 file system has a directory to store backups
389 of files that could not be stored back to the server. This sets
390 the name of this directory. You should regularly check this di‐
391 rectory.
392 Default: lost+found
393 cache_dir
396 The directory where mount.davfs will store cached files. For ev‐
397 ery mount point a subdirectory will be created.
398 In the systemwide configuration file this will set the system
399 wide cache, used by root. In a users configuration file it will
400 set the cache used by this user.
401 Defaults: /var/cache/davfs2 and ~/.davfs2/cache
402 cache_size
405 The amount of disk space in MiByte that may be used. mount.davfs
406 will always take enough space to cache open files, ignoring this
407 value if necessary.
408 Default: 50
409 table_size
412 mount.davfs maintains a hash table with an entry for each known
413 file or directory. This gives the number of entries in this ta‐
414 ble. For large file systems (more than some hundreds of files)
415 increasing this number may speed up file operations. The value
416 should be a power of 2.
417 Default: 1024
418 dir_refresh
421 After mount.davfs has got information about files in a directory
422 it considers it valid for this time in seconds. Note: This does
423 not affect opening of files and reading a directory by an appli‐
424 cation.
425 Default: 60
426 file_refresh
429 When a file or directory is opened by an application,
430 mount.davfs will first check the server for a newer version. But
431 some applications do open calls on the same file in short se‐
432 quence. To avoid unnecessary traffic mount.davfs will wait that
433 many seconds before it send a new request for the same informa‐
434 tion.
435 Default: 1
436 delay_upload
439 When a file that has been changed is closed, mount.davfs will
440 wait that many seconds before it will upload it to the server.
441 This will avoid uploading of temporary files that will be re‐
442 moved immediately after closing. If you need the files to ap‐
443 pear on the server immediately after closing, set this option to
444 0.
445 Default: 10
446 gui_optimize
449 When a file is opened, mount.davfs will have to check the server
450 whether there is a newer version. Graphical User Interfaces tend
451 to open just any file, slowing down things dramatically for
452 large directories. With this option mount.davfs will try to get
453 this information from all files in a directory with one PROPFIND
454 request. 0 = no, 1 = yes.
455 Default: 0
456 minimize_mem
459 davfs2 holds information about files and directories in the
460 working memory. It will stay there as long as the file system is
461 mounted and the file is not deleted. By this memory usage by
462 davfs2 will grow over time and may slow down davfs2. With this
463 option set to 1 davfs2 will regularly clean the memory from in‐
464 formation that has not be used for some time. 0 = no, 1 = yes.
465 Warning: Most file attributes are only maintained locally be‐
466 cause there is no corresponding WebDAV property. So if users
467 change attributes (owner, group, access bits) locally this
468 changes will be lost and attribute values will be reset to the
469 default values.
470 Default: 0
471
475 debug Send debug messages to the syslog daemon. The value tells what
476 kind of information shall be logged. The messages are send with
477 facility LOG_DAEMON and priority LOG_DEBUG. It depends from the
478 configuration of the syslog daemon where the messages will go
479 (propably /var/log/messages, /var/log/syslog or /var/log/dae‐
480 mon.log). Whether HTTP related debug messages are available de‐
481 pends on your neon library.
482 Unlike other options, this option is cumulative. If there are
483 several debug entries with different values, all of them will be
484 applied. Also debug options from /etc/davfs2/davfs2.conf and
485 ~/.davfs2/davfs2.conf are merged.
486 Note: Debug messages let the log-files grow quickly. Never use
487 this option in normal operation of mount.davfs.
488 Default: no debugging messages
489 Recognized values:
491 config Command line and configuration options.
493 kernel Upcalls from the kernel file system.
495 cache Cache operations like adding and removing nodes.
497 http HTTP headers.
499 xml Parsing of the XML-body of WebDAV-requests.
501 httpauth
503 Negotiation of authentication.
504 locks Information about locks.
506 ssl TLS/SSL related stuff like certificates.
508 httpbody
510 Complete body of HTTP-responses.
511 secrets
513 Also print confidential information, which is usually
514 omitted or obscured.
515 most Includes config, kernel, cache and http.
517
521 This man page was written by by Werner Baumann <werner.baumann@online‐
522 home.de>.
523
527 http://savannah.nongnu.org/projects/davfs2
528
532 mount.davfs(8), umount.davfs(8), mount(8), umount(8), fstab(5)
533davfs2 2020-08-06 davfs2.conf(5)