1BLKDEACTIVATE(8) BLKDEACTIVATE(8)
2
6 blkdeactivate — utility to deactivate block devices
7
9 blkdeactivate [-d dm_options] [-e] [-h] [-l lvm_options] [-m
10 mpath_options] [-r mdraid_options] [-o vdo_options] [-u] [-v] [device]
11
13 The blkdeactivate utility deactivates block devices. For mounted block
14 devices, it attempts to unmount it automatically before trying to deac‐
15 tivate. The utility currently supports device-mapper devices (DM), in‐
16 cluding LVM volumes and software RAID MD devices. LVM volumes are han‐
17 dled directly using the lvm(8) command, the rest of device-mapper based
18 devices are handled using the dmsetup(8) command. MD devices are han‐
19 dled using the mdadm(8) command.
20
22 -d|--dmoptions dm_options
23 Comma separated list of device-mapper specific options. Accept‐
24 ed dmsetup(8) options are:
25 retry Retry removal several times in case of failure.
27 force Force device removal.
29 -e|--errors
31 Show errors reported from tools called by blkdeactivate. Without
32 this option, any error messages from these external tools are
33 suppressed and the blkdeactivate itself provides only a summary
34 message to indicate the device was skipped.
35 -h|--help
37 Display the help text.
38 -l|--lvmoptions lvm_options
40 Comma-separated list of LVM specific options:
41 retry Retry removal several times in case of failure.
43 wholevg
45 Deactivate the whole LVM Volume Group when processing a
46 Logical Volume. Deactivating the Volume Group as a whole
47 is quicker than deactivating each Logical Volume sepa‐
48 rately.
49 -r|--mdraidoptions mdraid_options
51 Comma-separated list of MD RAID specific options:
52 wait Wait MD device's resync, recovery or reshape action to
54 complete before deactivation.
55 -m|--mpathoptions mpath_options
57 Comma-separated list of device-mapper multipath specific op‐
58 tions:
59 disablequeueing
61 Disable queueing on all multipath devices before deacti‐
62 vation. This avoids a situation where blkdeactivate may
63 end up waiting if all the paths are unavailable for any
64 underlying device-mapper multipath device.
65 -o|--vdooptions vdo_options
67 Comma-separated list of VDO specific options:
68 configfile=file
70 Use specified VDO configuration file.
71 -u|--umount
73 Unmount a mounted device before trying to deactivate it. With‐
74 out this option used, a device that is mounted is not deactivat‐
75 ed.
76 -v, --verbose
78 Run in verbose mode. Use -vv for even more verbose mode.
79
81 Deactivate all supported block devices found in the system, skipping
82 mounted devices.
83 # blkdeactivate
84 Deactivate all supported block devices found in the system, unmounting
86 any mounted devices first, if possible.
87 # blkdeactivate -u
88 Deactivate the device /dev/vg/lvol0 together with all its holders, un‐
90 mounting any mounted devices first, if possible.
91 # blkdeactivate -u /dev/vg/lvol0
92 Deactivate all supported block devices found in the system. If the de‐
94 activation of a device-mapper device fails, retry it. Deactivate the
95 whole Volume Group at once when processing an LVM Logical Volume.
96 # blkdeactivate -u -d retry -l wholevg
97 Deactivate all supported block devices found in the system. If the de‐
99 activation of a device-mapper device fails, retry it and force removal.
100 # blkdeactivate -d force,retry
101
103 dmsetup(8), lsblk(8), lvm(8), mdadm(8), multipathd(8), vdo(8),
104 umount(8)
105Red Hat, Inc LVM TOOLS 2.03.18(2)-git (2022-11-10) BLKDEACTIVATE(8)