1mongod_selinux(8)            SELinux Policy mongod           mongod_selinux(8)
2
3
4

NAME

6       mongod_selinux  -  Security  Enhanced  Linux Policy for the mongod pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux  secures  the  mongod  processes  via  flexible
11       mandatory access control.
12
13       The  mongod  processes  execute with the mongod_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep mongod_t
20
21
22

ENTRYPOINTS

24       The  mongod_t  SELinux  type  can be entered via the mongod_exec_t file
25       type.
26
27       The default entrypoint paths for the mongod_t domain are the following:
28
29       /usr/bin/mongod,   /usr/bin/mongos,    /usr/libexec/mongodb-scl-helper,
30       /usr/share/aeolus-conductor/dbomatic/dbomatic
31

PROCESS TYPES

33       SELinux defines process types (domains) for each process running on the
34       system
35
36       You can see the context of a process using the -Z option to ps
37
38       Policy governs the access confined processes have  to  files.   SELinux
39       mongod  policy  is  very  flexible allowing users to setup their mongod
40       processes in as secure a method as possible.
41
42       The following process types are defined for mongod:
43
44       mongod_t
45
46       Note: semanage permissive -a mongod_t can be used to make  the  process
47       type  mongod_t  permissive.  SELinux does not deny access to permissive
48       process types, but the AVC (SELinux denials) messages are still  gener‐
49       ated.
50
51

BOOLEANS

53       SELinux  policy is customizable based on least access required.  mongod
54       policy is extremely flexible and has several booleans that allow you to
55       manipulate the policy and run mongod with the tightest access possible.
56
57
58
59       If  you  want  to  dontaudit all daemons scheduling requests (setsched,
60       sys_nice), you must turn on the  daemons_dontaudit_scheduling  boolean.
61       Enabled by default.
62
63       setsebool -P daemons_dontaudit_scheduling 1
64
65
66
67       If you want to allow all domains to execute in fips_mode, you must turn
68       on the fips_mode boolean. Enabled by default.
69
70       setsebool -P fips_mode 1
71
72
73
74       If you want to allow system to run with  NIS,  you  must  turn  on  the
75       nis_enabled boolean. Disabled by default.
76
77       setsebool -P nis_enabled 1
78
79
80

PORT TYPES

82       SELinux defines port types to represent TCP and UDP ports.
83
84       You  can  see  the  types associated with a port by using the following
85       command:
86
87       semanage port -l
88
89
90       Policy governs the access  confined  processes  have  to  these  ports.
91       SELinux  mongod  policy  is very flexible allowing users to setup their
92       mongod processes in as secure a method as possible.
93
94       The following port types are defined for mongod:
95
96
97       mongod_port_t
98
99
100
101       Default Defined Ports:
102                 tcp 27017-27019,28017-28019
103

MANAGED FILES

105       The SELinux process type mongod_t can manage  files  labeled  with  the
106       following file types.  The paths listed are the default paths for these
107       file types.  Note the processes UID still need to have DAC permissions.
108
109       cluster_conf_t
110
111            /etc/cluster(/.*)?
112
113       cluster_var_lib_t
114
115            /var/lib/pcsd(/.*)?
116            /var/lib/cluster(/.*)?
117            /var/lib/openais(/.*)?
118            /var/lib/pengine(/.*)?
119            /var/lib/corosync(/.*)?
120            /usr/lib/heartbeat(/.*)?
121            /var/lib/heartbeat(/.*)?
122            /var/lib/pacemaker(/.*)?
123
124       cluster_var_run_t
125
126            /var/run/crm(/.*)?
127            /var/run/cman_.*
128            /var/run/rsctmp(/.*)?
129            /var/run/aisexec.*
130            /var/run/heartbeat(/.*)?
131            /var/run/pcsd-ruby.socket
132            /var/run/corosync-qnetd(/.*)?
133            /var/run/corosync-qdevice(/.*)?
134            /var/run/corosync.pid
135            /var/run/cpglockd.pid
136            /var/run/rgmanager.pid
137            /var/run/cluster/rgmanager.sk
138
139       krb5_host_rcache_t
140
141            /var/tmp/krb5_0.rcache2
142            /var/cache/krb5rcache(/.*)?
143            /var/tmp/nfs_0
144            /var/tmp/DNS_25
145            /var/tmp/host_0
146            /var/tmp/imap_0
147            /var/tmp/HTTP_23
148            /var/tmp/HTTP_48
149            /var/tmp/ldap_55
150            /var/tmp/ldap_487
151            /var/tmp/ldapmap1_0
152
153       mongod_log_t
154
155            /var/log/mongo.*
156            /var/log/aeolus-conductor/dbomatic.log.*
157
158       mongod_tmp_t
159
160
161       mongod_var_lib_t
162
163            /var/lib/mongo.*
164
165       mongod_var_run_t
166
167            /var/run/mongo.*
168            /var/run/aeolus/dbomatic.pid
169
170       root_t
171
172            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
173            /
174            /initrd
175
176

FILE CONTEXTS

178       SELinux requires files to have an extended attribute to define the file
179       type.
180
181       You can see the context of a file using the -Z option to ls
182
183       Policy  governs  the  access  confined  processes  have to these files.
184       SELinux mongod policy is very flexible allowing users  to  setup  their
185       mongod processes in as secure a method as possible.
186
187       STANDARD FILE CONTEXT
188
189       SELinux defines the file context types for the mongod, if you wanted to
190       store files with these types in a different paths, you need to  execute
191       the  semanage  command  to  specify alternate labeling and then use re‐
192       storecon to put the labels on disk.
193
194       semanage fcontext -a -t mongod_exec_t '/srv/mongod/content(/.*)?'
195       restorecon -R -v /srv/mymongod_content
196
197       Note: SELinux often uses regular expressions  to  specify  labels  that
198       match multiple files.
199
200       The following file types are defined for mongod:
201
202
203
204       mongod_exec_t
205
206       -  Set  files with the mongod_exec_t type, if you want to transition an
207       executable to the mongod_t domain.
208
209
210       Paths:
211            /usr/bin/mongod, /usr/bin/mongos, /usr/libexec/mongodb-scl-helper,
212            /usr/share/aeolus-conductor/dbomatic/dbomatic
213
214
215       mongod_initrc_exec_t
216
217       -  Set files with the mongod_initrc_exec_t type, if you want to transi‐
218       tion an executable to the mongod_initrc_t domain.
219
220
221       Paths:
222            /etc/rc.d/init.d/mongod, /etc/rc.d/init.d/mongos
223
224
225       mongod_log_t
226
227       - Set files with the mongod_log_t type, if you want to treat  the  data
228       as mongod log data, usually stored under the /var/log directory.
229
230
231       Paths:
232            /var/log/mongo.*, /var/log/aeolus-conductor/dbomatic.log.*
233
234
235       mongod_tmp_t
236
237       -  Set  files  with  the mongod_tmp_t type, if you want to store mongod
238       temporary files in the /tmp directories.
239
240
241
242       mongod_unit_file_t
243
244       - Set files with the mongod_unit_file_t type, if you want to treat  the
245       files as mongod unit content.
246
247
248       Paths:
249            /usr/lib/systemd/system/mongod.*, /usr/lib/systemd/system/mongos.*
250
251
252       mongod_var_lib_t
253
254       -  Set  files  with the mongod_var_lib_t type, if you want to store the
255       mongod files under the /var/lib directory.
256
257
258
259       mongod_var_run_t
260
261       - Set files with the mongod_var_run_t type, if you want  to  store  the
262       mongod files under the /run or /var/run directory.
263
264
265       Paths:
266            /var/run/mongo.*, /var/run/aeolus/dbomatic.pid
267
268
269       Note:  File context can be temporarily modified with the chcon command.
270       If you want to permanently change the file context you need to use  the
271       semanage fcontext command.  This will modify the SELinux labeling data‐
272       base.  You will need to use restorecon to apply the labels.
273
274

COMMANDS

276       semanage fcontext can also be used to manipulate default  file  context
277       mappings.
278
279       semanage  permissive  can  also  be used to manipulate whether or not a
280       process type is permissive.
281
282       semanage module can also be used to enable/disable/install/remove  pol‐
283       icy modules.
284
285       semanage port can also be used to manipulate the port definitions
286
287       semanage boolean can also be used to manipulate the booleans
288
289
290       system-config-selinux is a GUI tool available to customize SELinux pol‐
291       icy settings.
292
293

AUTHOR

295       This manual page was auto-generated using sepolicy manpage .
296
297

SEE ALSO

299       selinux(8), mongod(8),  semanage(8),  restorecon(8),  chcon(1),  sepol‐
300       icy(8), setsebool(8)
301
302
303
304mongod                             23-10-20                  mongod_selinux(8)
Impressum