1naemon_selinux(8)            SELinux Policy naemon           naemon_selinux(8)
2
3
4

NAME

6       naemon_selinux  -  Security  Enhanced  Linux Policy for the naemon pro‐
7       cesses
8

DESCRIPTION

10       Security-Enhanced Linux  secures  the  naemon  processes  via  flexible
11       mandatory access control.
12
13       The  naemon  processes  execute with the naemon_t SELinux type. You can
14       check if you have these processes running by executing the  ps  command
15       with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep naemon_t
20
21
22

ENTRYPOINTS

24       The  naemon_t  SELinux  type  can be entered via the naemon_exec_t file
25       type.
26
27       The default entrypoint paths for the naemon_t domain are the following:
28
29       /usr/bin/naemon
30

PROCESS TYPES

32       SELinux defines process types (domains) for each process running on the
33       system
34
35       You can see the context of a process using the -Z option to ps
36
37       Policy  governs  the  access confined processes have to files.  SELinux
38       naemon policy is very flexible allowing users  to  setup  their  naemon
39       processes in as secure a method as possible.
40
41       The following process types are defined for naemon:
42
43       naemon_t
44
45       Note:  semanage  permissive -a naemon_t can be used to make the process
46       type naemon_t permissive. SELinux does not deny  access  to  permissive
47       process  types, but the AVC (SELinux denials) messages are still gener‐
48       ated.
49
50

BOOLEANS

52       SELinux policy is customizable based on least access required.   naemon
53       policy is extremely flexible and has several booleans that allow you to
54       manipulate the policy and run naemon with the tightest access possible.
55
56
57
58       If you want to dontaudit all  daemons  scheduling  requests  (setsched,
59       sys_nice),  you  must turn on the daemons_dontaudit_scheduling boolean.
60       Enabled by default.
61
62       setsebool -P daemons_dontaudit_scheduling 1
63
64
65
66       If you want to allow all domains to execute in fips_mode, you must turn
67       on the fips_mode boolean. Enabled by default.
68
69       setsebool -P fips_mode 1
70
71
72

MANAGED FILES

74       The  SELinux  process  type  naemon_t can manage files labeled with the
75       following file types.  The paths listed are the default paths for these
76       file types.  Note the processes UID still need to have DAC permissions.
77
78       cluster_conf_t
79
80            /etc/cluster(/.*)?
81
82       cluster_var_lib_t
83
84            /var/lib/pcsd(/.*)?
85            /var/lib/cluster(/.*)?
86            /var/lib/openais(/.*)?
87            /var/lib/pengine(/.*)?
88            /var/lib/corosync(/.*)?
89            /usr/lib/heartbeat(/.*)?
90            /var/lib/heartbeat(/.*)?
91            /var/lib/pacemaker(/.*)?
92
93       cluster_var_run_t
94
95            /var/run/crm(/.*)?
96            /var/run/cman_.*
97            /var/run/rsctmp(/.*)?
98            /var/run/aisexec.*
99            /var/run/heartbeat(/.*)?
100            /var/run/pcsd-ruby.socket
101            /var/run/corosync-qnetd(/.*)?
102            /var/run/corosync-qdevice(/.*)?
103            /var/run/corosync.pid
104            /var/run/cpglockd.pid
105            /var/run/rgmanager.pid
106            /var/run/cluster/rgmanager.sk
107
108       naemon_cache_t
109
110            /var/cache/naemon(/.*)?
111
112       naemon_log_t
113
114            /var/log/naemon(/.*)?
115
116       naemon_var_lib_t
117
118            /var/lib/naemon(/.*)?
119
120       naemon_var_run_t
121
122            /var/run/naemon(/.*)?
123
124       root_t
125
126            /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
127            /
128            /initrd
129
130

FILE CONTEXTS

132       SELinux requires files to have an extended attribute to define the file
133       type.
134
135       You can see the context of a file using the -Z option to ls
136
137       Policy governs the access  confined  processes  have  to  these  files.
138       SELinux  naemon  policy  is very flexible allowing users to setup their
139       naemon processes in as secure a method as possible.
140
141       STANDARD FILE CONTEXT
142
143       SELinux defines the file context types for the naemon, if you wanted to
144       store  files with these types in a different paths, you need to execute
145       the semanage command to specify alternate labeling  and  then  use  re‐
146       storecon to put the labels on disk.
147
148       semanage fcontext -a -t naemon_exec_t '/srv/naemon/content(/.*)?'
149       restorecon -R -v /srv/mynaemon_content
150
151       Note:  SELinux  often  uses  regular expressions to specify labels that
152       match multiple files.
153
154       The following file types are defined for naemon:
155
156
157
158       naemon_cache_t
159
160       - Set files with the naemon_cache_t type, if  you  want  to  store  the
161       files under the /var/cache directory.
162
163
164
165       naemon_exec_t
166
167       -  Set  files with the naemon_exec_t type, if you want to transition an
168       executable to the naemon_t domain.
169
170
171
172       naemon_initrc_exec_t
173
174       - Set files with the naemon_initrc_exec_t type, if you want to  transi‐
175       tion an executable to the naemon_initrc_t domain.
176
177
178
179       naemon_log_t
180
181       -  Set  files with the naemon_log_t type, if you want to treat the data
182       as naemon log data, usually stored under the /var/log directory.
183
184
185
186       naemon_var_lib_t
187
188       - Set files with the naemon_var_lib_t type, if you want  to  store  the
189       naemon files under the /var/lib directory.
190
191
192
193       naemon_var_run_t
194
195       -  Set  files  with the naemon_var_run_t type, if you want to store the
196       naemon files under the /run or /var/run directory.
197
198
199
200       Note: File context can be temporarily modified with the chcon  command.
201       If  you want to permanently change the file context you need to use the
202       semanage fcontext command.  This will modify the SELinux labeling data‐
203       base.  You will need to use restorecon to apply the labels.
204
205

COMMANDS

207       semanage  fcontext  can also be used to manipulate default file context
208       mappings.
209
210       semanage permissive can also be used to manipulate  whether  or  not  a
211       process type is permissive.
212
213       semanage  module can also be used to enable/disable/install/remove pol‐
214       icy modules.
215
216       semanage boolean can also be used to manipulate the booleans
217
218
219       system-config-selinux is a GUI tool available to customize SELinux pol‐
220       icy settings.
221
222

AUTHOR

224       This manual page was auto-generated using sepolicy manpage .
225
226

SEE ALSO

228       selinux(8),  naemon(8),  semanage(8),  restorecon(8),  chcon(1), sepol‐
229       icy(8), setsebool(8)
230
231
232
233naemon                             23-10-20                  naemon_selinux(8)
Impressum