1sanlk_resetd_selinux(8) SELinux Policy sanlk_resetd sanlk_resetd_selinux(8)
2
6 sanlk_resetd_selinux - Security Enhanced Linux Policy for the sanlk_re‐
7 setd processes
8
10 Security-Enhanced Linux secures the sanlk_resetd processes via flexible
11 mandatory access control.
12 The sanlk_resetd processes execute with the sanlk_resetd_t SELinux
14 type. You can check if you have these processes running by executing
15 the ps command with the -Z qualifier.
16 For example:
18 ps -eZ | grep sanlk_resetd_t
20
24 The sanlk_resetd_t SELinux type can be entered via the sanlk_re‐
25 setd_exec_t file type.
26 The default entrypoint paths for the sanlk_resetd_t domain are the fol‐
28 lowing:
29 /usr/sbin/sanlk-resetd
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 sanlk_resetd policy is very flexible allowing users to setup their
40 sanlk_resetd processes in as secure a method as possible.
41 The following process types are defined for sanlk_resetd:
43 sanlk_resetd_t
45 Note: semanage permissive -a sanlk_resetd_t can be used to make the
47 process type sanlk_resetd_t permissive. SELinux does not deny access to
48 permissive process types, but the AVC (SELinux denials) messages are
49 still generated.
50
53 SELinux policy is customizable based on least access required.
54 sanlk_resetd policy is extremely flexible and has several booleans that
55 allow you to manipulate the policy and run sanlk_resetd with the tight‐
56 est access possible.
57 If you want to dontaudit all daemons scheduling requests (setsched,
61 sys_nice), you must turn on the daemons_dontaudit_scheduling boolean.
62 Enabled by default.
63 setsebool -P daemons_dontaudit_scheduling 1
65 If you want to allow all domains to execute in fips_mode, you must turn
69 on the fips_mode boolean. Enabled by default.
70 setsebool -P fips_mode 1
72
76 The SELinux process type sanlk_resetd_t can manage files labeled with
77 the following file types. The paths listed are the default paths for
78 these file types. Note the processes UID still need to have DAC per‐
79 missions.
80 cluster_conf_t
82 /etc/cluster(/.*)?
84 cluster_var_lib_t
86 /var/lib/pcsd(/.*)?
88 /var/lib/cluster(/.*)?
89 /var/lib/openais(/.*)?
90 /var/lib/pengine(/.*)?
91 /var/lib/corosync(/.*)?
92 /usr/lib/heartbeat(/.*)?
93 /var/lib/heartbeat(/.*)?
94 /var/lib/pacemaker(/.*)?
95 cluster_var_run_t
97 /var/run/crm(/.*)?
99 /var/run/cman_.*
100 /var/run/rsctmp(/.*)?
101 /var/run/aisexec.*
102 /var/run/heartbeat(/.*)?
103 /var/run/pcsd-ruby.socket
104 /var/run/corosync-qnetd(/.*)?
105 /var/run/corosync-qdevice(/.*)?
106 /var/run/corosync.pid
107 /var/run/cpglockd.pid
108 /var/run/rgmanager.pid
109 /var/run/cluster/rgmanager.sk
110 root_t
112 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
114 /
115 /initrd
116 sanlock_var_run_t
118 /var/run/sanlock(/.*)?
120 /var/run/sanlk-resetd(/.*)?
121
124 SELinux requires files to have an extended attribute to define the file
125 type.
126 You can see the context of a file using the -Z option to ls
128 Policy governs the access confined processes have to these files.
130 SELinux sanlk_resetd policy is very flexible allowing users to setup
131 their sanlk_resetd processes in as secure a method as possible.
132 STANDARD FILE CONTEXT
134 SELinux defines the file context types for the sanlk_resetd, if you
136 wanted to store files with these types in a different paths, you need
137 to execute the semanage command to specify alternate labeling and then
138 use restorecon to put the labels on disk.
139 semanage fcontext -a -t sanlk_resetd_exec_t '/srv/sanlk_resetd/con‐
141 tent(/.*)?'
142 restorecon -R -v /srv/mysanlk_resetd_content
143 Note: SELinux often uses regular expressions to specify labels that
145 match multiple files.
146 The following file types are defined for sanlk_resetd:
148 sanlk_resetd_exec_t
152 - Set files with the sanlk_resetd_exec_t type, if you want to transi‐
154 tion an executable to the sanlk_resetd_t domain.
155 sanlk_resetd_unit_file_t
159 - Set files with the sanlk_resetd_unit_file_t type, if you want to
161 treat the files as sanlk resetd unit content.
162 Note: File context can be temporarily modified with the chcon command.
166 If you want to permanently change the file context you need to use the
167 semanage fcontext command. This will modify the SELinux labeling data‐
168 base. You will need to use restorecon to apply the labels.
169
172 semanage fcontext can also be used to manipulate default file context
173 mappings.
174 semanage permissive can also be used to manipulate whether or not a
176 process type is permissive.
177 semanage module can also be used to enable/disable/install/remove pol‐
179 icy modules.
180 semanage boolean can also be used to manipulate the booleans
182 system-config-selinux is a GUI tool available to customize SELinux pol‐
185 icy settings.
186
189 This manual page was auto-generated using sepolicy manpage .
190
193 selinux(8), sanlk_resetd(8), semanage(8), restorecon(8), chcon(1), se‐
194 policy(8), setsebool(8)
195sanlk_resetd 23-10-20 sanlk_resetd_selinux(8)