1SMBIOS-WIRELESS-CTL(1)           User Commands          SMBIOS-WIRELESS-CTL(1)
2
3
4

NAME

6       smbios-wireless-ctl - ../src/bin/smbios-wireless-ctl
7

SYNOPSIS

9       smbios-wireless-ctl
10
11

OPTIONS

13       --version
14              show program's version number and exit
15
16       -h, --help
17              show this help message and exit
18
19       --info Show wireless configuration (default)
20
21       --boot Set BIOS boot-time setting.
22
23       --no-boot
24              Do not set BIOS boot-time setting.
25
26       --runtime
27              Set BIOS runtime setting (default).
28
29       --no-runtime, --boot-only, --boot_only
30              Do not set BIOS runtime setting.
31
32       --wlan=WLAN
33              Set radio runtime status for wireless LAN
34
35       --bt=BT
36              Set radio runtime status for Bluetooth
37
38       --wwan=WWAN
39              Set radio runtime status for cellular (wireless WAN)
40
41       --uwb=UWB
42              Set radio runtime status for UWB
43
44       --wigig=WIGIG
45              Set radio runtime status for WiGig
46
47       --sw_wlan=SW_WLAN
48              Set hardware switch so that it controls radio for wireless LAN
49
50       --sw_bt=SW_BT
51              Set hardware switch so that it controls radio for Bluetooth
52
53       --sw_wwan=SW_WWAN
54              Set  hardware  switch  so  that  it  controls radio for cellular
55              (wireless WAN)
56
57       --sw_uwb=SW_UWB
58              Set hardware switch so that it controls radio for UWB
59
60       --sw_wigig=SW_WIGIG
61              Set hardware switch so that it controls radio for WiGig
62
63       --sw_locator=SW_LOCATOR
64              Enable or disable the WIFI locator switch
65
66       --st_wlan
67              Get status for wireless LAN. 0 = enabled. 1 = disabled. 2 =  not
68              present. 3 = unsupported. 4 = unknown.
69
70       --st_bt
71              Get  status  for  Bluetooth.  0 = enabled. 1 = disabled. 2 = not
72              present. 3 = unsupported. 4 = unknown.
73
74       --st_wwan
75              Get status for cellular (wireless WAN). 0 = enabled.  1  =  dis‐
76              abled. 2 = not present. 3 = unsupported. 4 = unknown.
77
78       --st_uwb
79              Get  status for UWB. 0 = enabled. 1 = disabled. 2 = not present.
80              3 = unsupported. 4 = unknown.
81
82       --st_wigig
83              Get status for WiGig. 0  =  enabled.  1  =  disabled.  2  =  not
84              present. 3 = unsupported. 4 = unknown.
85
86       --st_locator=ST_LOCATOR
87              Get status for locator switch
88
89       -v, --verbose
90              Display more verbose output.
91
92       -q, --quiet
93              Minimize program output. Only errors and warnings are displayed.
94
95       --trace
96              Enable verbose function tracing.
97
98       --logconfig=LOGCONFIG
99              Specify alternate config log.
100
101       --security-key=SECURITY_KEY
102              BIOS pre-calculated security key.
103
104       --password=PASSWORD
105              BIOS Setup password for set/activate operations.
106
107       -r, --rawpassword
108              Do not auto-convert password to scancodes.
109
110       --memory-dat=MEMORY_DAT
111              Path to a memory dump file to use instead of real RAM
112
113       --cmos-dat=CMOS_DAT
114              Path to a CMOS dump file to use instead of real CMOS
115

SEE ALSO

117       The  full documentation for smbios-wireless-ctl is maintained as a Tex‐
118       info manual.  If the info and smbios-wireless-ctl programs are properly
119       installed at your site, the command
120
121              info smbios-wireless-ctl
122
123       should give you access to the complete manual.
124
125
126
127smbios-wireless-ctl 2.4.3        January 2023           SMBIOS-WIRELESS-CTL(1)
Impressum