1usnic_devinfo(1) usnic_devinfo(1)
2
3
4
6 usnic_devinfo - Simple utility to list information about usnic inter‐
7 faces
8
10 usnic_devinfo -h
11 usnic_devinfo [OPTIONS]
12
14 The usnic_devinfo utility can be used to query information about avail‐
15 able Cisco usNIC interfaces. The usnic_devinfo utility can filter
16 based on device name and can provide either a summary, or a detailed
17 information listing about each interface.
18
20 -b : Instead of showing all information about an interface, show only a
21 brief summary.
22
23 -d : Specify the local device by name or number. usNIC interfaces are
24 named following the pattern usnic_X where X is a non-negative integer.
25 This option accepts either the full name or the number after the usnic_
26 prefix.
27
29 $ usnic_devinfo -d usnic_0
30
31 Show information about the device named "usnic_0".
32
33 $ usnic_devinfo -d 0
34
35 This form is the same as the example above; it will display information
36 about the device named "usnic_0".
37
38 $ usnic_devinfo -d usnic_2 -b
39
40 Display brief information about the device named "usnic_2".
41
43 By default, the full information is displayed:
44
45 $ usnic_devinfo -d 0
46 usnic_0:
47 Interface: eth1
48 MAC Address: 58:ac:78:f2:84:e8
49 IP Address: 10.10.10.2
50 Netmask: 255.255.0.0
51 Prefix len: 16
52 MTU: 9000
53 Link State: UP
54 Bandwidth: 40 Gb/s
55 Device ID: UCSC-PCIE-C40Q-03 [VIC 1385] [0x014d]
56 Vendor ID: 4407
57 Vendor Part ID: 207
58 Firmware: 4.1(1d)
59 VFs: 64
60 CQ per VF: 6
61 QP per VF: 6
62 Interrupts per VF: 6
63 Max CQ: 384
64 Max CQ Entries: 65535
65 Max QP: 384
66 Max Send Credits: 4095
67 Max Recv Credits: 4095
68 Capabilities:
69 Map per res: yes
70 PIO sends: yes
71 CQ interrupts: no
72
73 $ usnic_devinfo -d 0 -b
74 usnic_0: eth1 58:ac:78:f2:84:e8 10.10.10.2/16 VIC 1385 4.1(1d) UP
75
76
77
78Cisco usNIC usnic_devinfo(1)