1hsqldb_selinux(8) SELinux Policy hsqldb hsqldb_selinux(8)
2
6 hsqldb_selinux - Security Enhanced Linux Policy for the hsqldb pro‐
7 cesses
8
10 Security-Enhanced Linux secures the hsqldb processes via flexible
11 mandatory access control.
12 The hsqldb processes execute with the hsqldb_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16 For example:
18 ps -eZ | grep hsqldb_t
20
24 The hsqldb_t SELinux type can be entered via the hsqldb_exec_t file
25 type.
26 The default entrypoint paths for the hsqldb_t domain are the following:
28 /usr/lib/hsqldb/hsqldb-post, /usr/lib/hsqldb/hsqldb-stop,
30 /usr/lib/hsqldb/hsqldb-wrapper
31
33 SELinux defines process types (domains) for each process running on the
34 system
35 You can see the context of a process using the -Z option to ps
37 Policy governs the access confined processes have to files. SELinux
39 hsqldb policy is very flexible allowing users to setup their hsqldb
40 processes in as secure a method as possible.
41 The following process types are defined for hsqldb:
43 hsqldb_t
45 Note: semanage permissive -a hsqldb_t can be used to make the process
47 type hsqldb_t permissive. SELinux does not deny access to permissive
48 process types, but the AVC (SELinux denials) messages are still gener‐
49 ated.
50
53 SELinux policy is customizable based on least access required. hsqldb
54 policy is extremely flexible and has several booleans that allow you to
55 manipulate the policy and run hsqldb with the tightest access possible.
56 If you want to dontaudit all daemons scheduling requests (setsched,
60 sys_nice), you must turn on the daemons_dontaudit_scheduling boolean.
61 Enabled by default.
62 setsebool -P daemons_dontaudit_scheduling 1
64 If you want to allow all domains to execute in fips_mode, you must turn
68 on the fips_mode boolean. Enabled by default.
69 setsebool -P fips_mode 1
71 If you want to allow system to run with NIS, you must turn on the
75 nis_enabled boolean. Disabled by default.
76 setsebool -P nis_enabled 1
78
82 The SELinux process type hsqldb_t can manage files labeled with the
83 following file types. The paths listed are the default paths for these
84 file types. Note the processes UID still need to have DAC permissions.
85 cluster_conf_t
87 /etc/cluster(/.*)?
89 cluster_var_lib_t
91 /var/lib/pcsd(/.*)?
93 /var/lib/cluster(/.*)?
94 /var/lib/openais(/.*)?
95 /var/lib/pengine(/.*)?
96 /var/lib/corosync(/.*)?
97 /usr/lib/heartbeat(/.*)?
98 /var/lib/heartbeat(/.*)?
99 /var/lib/pacemaker(/.*)?
100 cluster_var_run_t
102 /var/run/crm(/.*)?
104 /var/run/cman_.*
105 /var/run/rsctmp(/.*)?
106 /var/run/aisexec.*
107 /var/run/heartbeat(/.*)?
108 /var/run/pcsd-ruby.socket
109 /var/run/corosync-qnetd(/.*)?
110 /var/run/corosync-qdevice(/.*)?
111 /var/run/corosync.pid
112 /var/run/cpglockd.pid
113 /var/run/rgmanager.pid
114 /var/run/cluster/rgmanager.sk
115 hsqldb_tmp_t
117 hsqldb_var_lib_t
120 /var/lib/hsqldb(/.*)?
122 krb5_host_rcache_t
124 /var/tmp/krb5_0.rcache2
126 /var/cache/krb5rcache(/.*)?
127 /var/tmp/nfs_0
128 /var/tmp/DNS_25
129 /var/tmp/host_0
130 /var/tmp/imap_0
131 /var/tmp/HTTP_23
132 /var/tmp/HTTP_48
133 /var/tmp/ldap_55
134 /var/tmp/ldap_487
135 /var/tmp/ldapmap1_0
136 root_t
138 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
140 /
141 /initrd
142
145 SELinux requires files to have an extended attribute to define the file
146 type.
147 You can see the context of a file using the -Z option to ls
149 Policy governs the access confined processes have to these files.
151 SELinux hsqldb policy is very flexible allowing users to setup their
152 hsqldb processes in as secure a method as possible.
153 STANDARD FILE CONTEXT
155 SELinux defines the file context types for the hsqldb, if you wanted to
157 store files with these types in a different paths, you need to execute
158 the semanage command to specify alternate labeling and then use re‐
159 storecon to put the labels on disk.
160 semanage fcontext -a -t hsqldb_exec_t '/srv/hsqldb/content(/.*)?'
162 restorecon -R -v /srv/myhsqldb_content
163 Note: SELinux often uses regular expressions to specify labels that
165 match multiple files.
166 The following file types are defined for hsqldb:
168 hsqldb_exec_t
172 - Set files with the hsqldb_exec_t type, if you want to transition an
174 executable to the hsqldb_t domain.
175 Paths:
178 /usr/lib/hsqldb/hsqldb-post, /usr/lib/hsqldb/hsqldb-stop,
179 /usr/lib/hsqldb/hsqldb-wrapper
180 hsqldb_tmp_t
183 - Set files with the hsqldb_tmp_t type, if you want to store hsqldb
185 temporary files in the /tmp directories.
186 hsqldb_unit_file_t
190 - Set files with the hsqldb_unit_file_t type, if you want to treat the
192 files as hsqldb unit content.
193 hsqldb_var_lib_t
197 - Set files with the hsqldb_var_lib_t type, if you want to store the
199 hsqldb files under the /var/lib directory.
200 Note: File context can be temporarily modified with the chcon command.
204 If you want to permanently change the file context you need to use the
205 semanage fcontext command. This will modify the SELinux labeling data‐
206 base. You will need to use restorecon to apply the labels.
207
210 semanage fcontext can also be used to manipulate default file context
211 mappings.
212 semanage permissive can also be used to manipulate whether or not a
214 process type is permissive.
215 semanage module can also be used to enable/disable/install/remove pol‐
217 icy modules.
218 semanage boolean can also be used to manipulate the booleans
220 system-config-selinux is a GUI tool available to customize SELinux pol‐
223 icy settings.
224
227 This manual page was auto-generated using sepolicy manpage .
228
231 selinux(8), hsqldb(8), semanage(8), restorecon(8), chcon(1), sepol‐
232 icy(8), setsebool(8)
233hsqldb 23-12-15 hsqldb_selinux(8)