1ipsec_mgmt_selinux(8)      SELinux Policy ipsec_mgmt     ipsec_mgmt_selinux(8)
2
3
4

NAME

6       ipsec_mgmt_selinux  - Security Enhanced Linux Policy for the ipsec_mgmt
7       processes
8

DESCRIPTION

10       Security-Enhanced Linux secures the ipsec_mgmt processes  via  flexible
11       mandatory access control.
12
13       The  ipsec_mgmt  processes  execute with the ipsec_mgmt_t SELinux type.
14       You can check if you have these processes running by executing  the  ps
15       command with the -Z qualifier.
16
17       For example:
18
19       ps -eZ | grep ipsec_mgmt_t
20
21
22

ENTRYPOINTS

24       The  ipsec_mgmt_t  SELinux  type  can  be entered via the shell_exec_t,
25       ipsec_mgmt_exec_t file types.
26
27       The default entrypoint paths for the ipsec_mgmt_t domain are  the  fol‐
28       lowing:
29
30       /bin/d?ash,  /bin/ksh.*,  /bin/zsh.*,  /usr/bin/d?ash,  /usr/bin/ksh.*,
31       /usr/bin/zsh.*, /bin/esh, /bin/bash, /bin/fish,  /bin/mksh,  /bin/sash,
32       /bin/tcsh,    /bin/yash,   /bin/bash2,   /usr/bin/esh,   /sbin/nologin,
33       /usr/bin/bash,     /usr/bin/fish,     /usr/bin/mksh,     /usr/bin/sash,
34       /usr/bin/tcsh,     /usr/bin/yash,    /usr/bin/bash2,    /usr/sbin/sesh,
35       /usr/sbin/smrsh, /usr/bin/scponly,  /usr/libexec/sesh,  /usr/sbin/nolo‐
36       gin,  /usr/bin/git-shell,  /usr/sbin/scponlyc,  /usr/libexec/sudo/sesh,
37       /usr/bin/cockpit-bridge, /usr/libexec/cockpit-agent,  /usr/libexec/git-
38       core/git-shell,           /usr/sbin/ipsec,           /usr/sbin/swanctl,
39       /usr/sbin/strongimcv,  /usr/sbin/strongswan,  /usr/lib/ipsec/_plutorun,
40       /usr/lib/ipsec/_plutoload,                /usr/libexec/ipsec/_plutorun,
41       /usr/libexec/ipsec/_plutoload,        /usr/libexec/nm-openswan-service,
42       /usr/libexec/nm-libreswan-service
43

PROCESS TYPES

45       SELinux defines process types (domains) for each process running on the
46       system
47
48       You can see the context of a process using the -Z option to ps
49
50       Policy governs the access confined processes have  to  files.   SELinux
51       ipsec_mgmt  policy  is  very  flexible  allowing  users  to setup their
52       ipsec_mgmt processes in as secure a method as possible.
53
54       The following process types are defined for ipsec_mgmt:
55
56       ipsec_mgmt_t
57
58       Note: semanage permissive -a ipsec_mgmt_t  can  be  used  to  make  the
59       process  type  ipsec_mgmt_t permissive. SELinux does not deny access to
60       permissive process types, but the AVC (SELinux  denials)  messages  are
61       still generated.
62
63

BOOLEANS

65       SELinux   policy  is  customizable  based  on  least  access  required.
66       ipsec_mgmt policy is extremely flexible and has several  booleans  that
67       allow you to manipulate the policy and run ipsec_mgmt with the tightest
68       access possible.
69
70
71
72       If you want to allow all domains to execute in fips_mode, you must turn
73       on the fips_mode boolean. Enabled by default.
74
75       setsebool -P fips_mode 1
76
77
78
79       If  you  want  to  allow  system  to run with NIS, you must turn on the
80       nis_enabled boolean. Disabled by default.
81
82       setsebool -P nis_enabled 1
83
84
85

MANAGED FILES

87       The SELinux process type ipsec_mgmt_t can manage files labeled with the
88       following file types.  The paths listed are the default paths for these
89       file types.  Note the processes UID still need to have DAC permissions.
90
91       ipsec_key_file_t
92
93            /etc/ipsec.d(/.*)?
94            /etc/racoon/certs(/.*)?
95            /etc/ipsec.secrets.*
96            /var/lib/ipsec/nss(/.*)?
97            /etc/strongswan/ipsec.d(/.*)?
98            /etc/strongswan/swanctl/rsa(/.*)?
99            /etc/strongswan/swanctl/pkcs.*
100            /etc/strongswan/swanctl/x509.*
101            /etc/strongswan/ipsec.secrets.*
102            /etc/strongswan/swanctl/ecdsa(/.*)?
103            /etc/strongswan/swanctl/bliss/(/.*)?
104            /etc/strongswan/swanctl/pubkey(/.*)?
105            /etc/strongswan/swanctl/private(/.*)?
106            /etc/racoon/psk.txt
107
108       ipsec_mgmt_lock_t
109
110            /var/lock/subsys/ipsec
111            /var/lock/subsys/strongswan
112
113       ipsec_mgmt_var_run_t
114
115            /var/run/pluto/ipsec.info
116            /var/run/pluto/ipsec_setup.pid
117
118       ipsec_tmp_t
119
120
121       ipsec_var_run_t
122
123            /var/racoon(/.*)?
124            /var/run/pluto(/.*)?
125            /var/run/charon.*
126            /var/run/strongswan(/.*)?
127            /var/run/racoon.pid
128            /var/run/charon.ctl
129            /var/run/charon.dck
130            /var/run/charon.vici
131
132       krb5_host_rcache_t
133
134            /var/tmp/krb5_0.rcache2
135            /var/cache/krb5rcache(/.*)?
136            /var/tmp/nfs_0
137            /var/tmp/DNS_25
138            /var/tmp/host_0
139            /var/tmp/imap_0
140            /var/tmp/HTTP_23
141            /var/tmp/HTTP_48
142            /var/tmp/ldap_55
143            /var/tmp/ldap_487
144            /var/tmp/ldapmap1_0
145
146       systemd_passwd_var_run_t
147
148            /var/run/systemd/ask-password(/.*)?
149            /var/run/systemd/ask-password-block(/.*)?
150
151

FILE CONTEXTS

153       SELinux requires files to have an extended attribute to define the file
154       type.
155
156       You can see the context of a file using the -Z option to ls
157
158       Policy  governs  the  access  confined  processes  have to these files.
159       SELinux ipsec_mgmt policy is very  flexible  allowing  users  to  setup
160       their ipsec_mgmt processes in as secure a method as possible.
161
162       STANDARD FILE CONTEXT
163
164       SELinux  defines  the  file  context  types  for the ipsec_mgmt, if you
165       wanted to store files with these types in a different paths,  you  need
166       to  execute the semanage command to specify alternate labeling and then
167       use restorecon to put the labels on disk.
168
169       semanage  fcontext  -a   -t   ipsec_mgmt_exec_t   '/srv/ipsec_mgmt/con‐
170       tent(/.*)?'
171       restorecon -R -v /srv/myipsec_mgmt_content
172
173       Note:  SELinux  often  uses  regular expressions to specify labels that
174       match multiple files.
175
176       The following file types are defined for ipsec_mgmt:
177
178
179
180       ipsec_mgmt_devpts_t
181
182       - Set files with the ipsec_mgmt_devpts_t type, if you want to treat the
183       files as ipsec mgmt devpts data.
184
185
186
187       ipsec_mgmt_exec_t
188
189       -  Set files with the ipsec_mgmt_exec_t type, if you want to transition
190       an executable to the ipsec_mgmt_t domain.
191
192
193       Paths:
194            /usr/sbin/ipsec,     /usr/sbin/swanctl,      /usr/sbin/strongimcv,
195            /usr/sbin/strongswan,                    /usr/lib/ipsec/_plutorun,
196            /usr/lib/ipsec/_plutoload,           /usr/libexec/ipsec/_plutorun,
197            /usr/libexec/ipsec/_plutoload,   /usr/libexec/nm-openswan-service,
198            /usr/libexec/nm-libreswan-service
199
200
201       ipsec_mgmt_lock_t
202
203       - Set files with the ipsec_mgmt_lock_t type, if you want to  treat  the
204       files as ipsec mgmt lock data, stored under the /var/lock directory
205
206
207       Paths:
208            /var/lock/subsys/ipsec, /var/lock/subsys/strongswan
209
210
211       ipsec_mgmt_unit_file_t
212
213       -  Set files with the ipsec_mgmt_unit_file_t type, if you want to treat
214       the files as ipsec mgmt unit content.
215
216
217       Paths:
218            /usr/lib/systemd/system/ipsec.*,             /usr/lib/systemd/sys‐
219            tem/strongimcv.*,            /usr/lib/systemd/system/strongswan.*,
220            /usr/lib/systemd/system/strongswan-swanctl.*
221
222
223       ipsec_mgmt_var_run_t
224
225       - Set files with the ipsec_mgmt_var_run_t type, if you  want  to  store
226       the ipsec mgmt files under the /run or /var/run directory.
227
228
229       Paths:
230            /var/run/pluto/ipsec.info, /var/run/pluto/ipsec_setup.pid
231
232
233       Note:  File context can be temporarily modified with the chcon command.
234       If you want to permanently change the file context you need to use  the
235       semanage fcontext command.  This will modify the SELinux labeling data‐
236       base.  You will need to use restorecon to apply the labels.
237
238

COMMANDS

240       semanage fcontext can also be used to manipulate default  file  context
241       mappings.
242
243       semanage  permissive  can  also  be used to manipulate whether or not a
244       process type is permissive.
245
246       semanage module can also be used to enable/disable/install/remove  pol‐
247       icy modules.
248
249       semanage boolean can also be used to manipulate the booleans
250
251
252       system-config-selinux is a GUI tool available to customize SELinux pol‐
253       icy settings.
254
255

AUTHOR

257       This manual page was auto-generated using sepolicy manpage .
258
259

SEE ALSO

261       selinux(8), ipsec_mgmt(8), semanage(8), restorecon(8), chcon(1), sepol‐
262       icy(8), setsebool(8)
263
264
265
266ipsec_mgmt                         23-12-15              ipsec_mgmt_selinux(8)
Impressum