1ninfod_selinux(8) SELinux Policy ninfod ninfod_selinux(8)
2
6 ninfod_selinux - Security Enhanced Linux Policy for the ninfod pro‐
7 cesses
8
10 Security-Enhanced Linux secures the ninfod processes via flexible
11 mandatory access control.
12 The ninfod processes execute with the ninfod_t SELinux type. You can
14 check if you have these processes running by executing the ps command
15 with the -Z qualifier.
16 For example:
18 ps -eZ | grep ninfod_t
20
24 The ninfod_t SELinux type can be entered via the ninfod_exec_t file
25 type.
26 The default entrypoint paths for the ninfod_t domain are the following:
28 /usr/sbin/ninfod
30
32 SELinux defines process types (domains) for each process running on the
33 system
34 You can see the context of a process using the -Z option to ps
36 Policy governs the access confined processes have to files. SELinux
38 ninfod policy is very flexible allowing users to setup their ninfod
39 processes in as secure a method as possible.
40 The following process types are defined for ninfod:
42 ninfod_t
44 Note: semanage permissive -a ninfod_t can be used to make the process
46 type ninfod_t permissive. SELinux does not deny access to permissive
47 process types, but the AVC (SELinux denials) messages are still gener‐
48 ated.
49
52 SELinux policy is customizable based on least access required. ninfod
53 policy is extremely flexible and has several booleans that allow you to
54 manipulate the policy and run ninfod with the tightest access possible.
55 If you want to dontaudit all daemons scheduling requests (setsched,
59 sys_nice), you must turn on the daemons_dontaudit_scheduling boolean.
60 Enabled by default.
61 setsebool -P daemons_dontaudit_scheduling 1
63 If you want to allow all domains to execute in fips_mode, you must turn
67 on the fips_mode boolean. Enabled by default.
68 setsebool -P fips_mode 1
70 If you want to allow system to run with NIS, you must turn on the
74 nis_enabled boolean. Disabled by default.
75 setsebool -P nis_enabled 1
77
81 The SELinux process type ninfod_t can manage files labeled with the
82 following file types. The paths listed are the default paths for these
83 file types. Note the processes UID still need to have DAC permissions.
84 cluster_conf_t
86 /etc/cluster(/.*)?
88 cluster_var_lib_t
90 /var/lib/pcsd(/.*)?
92 /var/lib/cluster(/.*)?
93 /var/lib/openais(/.*)?
94 /var/lib/pengine(/.*)?
95 /var/lib/corosync(/.*)?
96 /usr/lib/heartbeat(/.*)?
97 /var/lib/heartbeat(/.*)?
98 /var/lib/pacemaker(/.*)?
99 cluster_var_run_t
101 /var/run/crm(/.*)?
103 /var/run/cman_.*
104 /var/run/rsctmp(/.*)?
105 /var/run/aisexec.*
106 /var/run/heartbeat(/.*)?
107 /var/run/pcsd-ruby.socket
108 /var/run/corosync-qnetd(/.*)?
109 /var/run/corosync-qdevice(/.*)?
110 /var/run/corosync.pid
111 /var/run/cpglockd.pid
112 /var/run/rgmanager.pid
113 /var/run/cluster/rgmanager.sk
114 krb5_host_rcache_t
116 /var/tmp/krb5_0.rcache2
118 /var/cache/krb5rcache(/.*)?
119 /var/tmp/nfs_0
120 /var/tmp/DNS_25
121 /var/tmp/host_0
122 /var/tmp/imap_0
123 /var/tmp/HTTP_23
124 /var/tmp/HTTP_48
125 /var/tmp/ldap_55
126 /var/tmp/ldap_487
127 /var/tmp/ldapmap1_0
128 ninfod_run_t
130 /var/run/ninfod.*
132 root_t
134 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
136 /
137 /initrd
138
141 SELinux requires files to have an extended attribute to define the file
142 type.
143 You can see the context of a file using the -Z option to ls
145 Policy governs the access confined processes have to these files.
147 SELinux ninfod policy is very flexible allowing users to setup their
148 ninfod processes in as secure a method as possible.
149 STANDARD FILE CONTEXT
151 SELinux defines the file context types for the ninfod, if you wanted to
153 store files with these types in a different paths, you need to execute
154 the semanage command to specify alternate labeling and then use re‐
155 storecon to put the labels on disk.
156 semanage fcontext -a -t ninfod_exec_t '/srv/ninfod/content(/.*)?'
158 restorecon -R -v /srv/myninfod_content
159 Note: SELinux often uses regular expressions to specify labels that
161 match multiple files.
162 The following file types are defined for ninfod:
164 ninfod_exec_t
168 - Set files with the ninfod_exec_t type, if you want to transition an
170 executable to the ninfod_t domain.
171 ninfod_run_t
175 - Set files with the ninfod_run_t type, if you want to treat the files
177 as ninfod run data.
178 ninfod_unit_file_t
182 - Set files with the ninfod_unit_file_t type, if you want to treat the
184 files as ninfod unit content.
185 Note: File context can be temporarily modified with the chcon command.
189 If you want to permanently change the file context you need to use the
190 semanage fcontext command. This will modify the SELinux labeling data‐
191 base. You will need to use restorecon to apply the labels.
192
195 semanage fcontext can also be used to manipulate default file context
196 mappings.
197 semanage permissive can also be used to manipulate whether or not a
199 process type is permissive.
200 semanage module can also be used to enable/disable/install/remove pol‐
202 icy modules.
203 semanage boolean can also be used to manipulate the booleans
205 system-config-selinux is a GUI tool available to customize SELinux pol‐
208 icy settings.
209
212 This manual page was auto-generated using sepolicy manpage .
213
216 selinux(8), ninfod(8), semanage(8), restorecon(8), chcon(1), sepol‐
217 icy(8), setsebool(8)
218ninfod 23-12-15 ninfod_selinux(8)