1pads_selinux(8) SELinux Policy pads pads_selinux(8)
2
6 pads_selinux - Security Enhanced Linux Policy for the pads processes
7
9 Security-Enhanced Linux secures the pads processes via flexible manda‐
10 tory access control.
11 The pads processes execute with the pads_t SELinux type. You can check
13 if you have these processes running by executing the ps command with
14 the -Z qualifier.
15 For example:
17 ps -eZ | grep pads_t
19
23 The pads_t SELinux type can be entered via the pads_exec_t file type.
24 The default entrypoint paths for the pads_t domain are the following:
26 /usr/bin/pads
28
30 SELinux defines process types (domains) for each process running on the
31 system
32 You can see the context of a process using the -Z option to ps
34 Policy governs the access confined processes have to files. SELinux
36 pads policy is very flexible allowing users to setup their pads pro‐
37 cesses in as secure a method as possible.
38 The following process types are defined for pads:
40 pads_t
42 Note: semanage permissive -a pads_t can be used to make the process
44 type pads_t permissive. SELinux does not deny access to permissive
45 process types, but the AVC (SELinux denials) messages are still gener‐
46 ated.
47
50 SELinux policy is customizable based on least access required. pads
51 policy is extremely flexible and has several booleans that allow you to
52 manipulate the policy and run pads with the tightest access possible.
53 If you want to dontaudit all daemons scheduling requests (setsched,
57 sys_nice), you must turn on the daemons_dontaudit_scheduling boolean.
58 Enabled by default.
59 setsebool -P daemons_dontaudit_scheduling 1
61 If you want to deny all system processes and Linux users to use blue‐
65 tooth wireless technology, you must turn on the deny_bluetooth boolean.
66 Disabled by default.
67 setsebool -P deny_bluetooth 1
69 If you want to allow all domains to execute in fips_mode, you must turn
73 on the fips_mode boolean. Enabled by default.
74 setsebool -P fips_mode 1
76 If you want to allow confined applications to use nscd shared memory,
80 you must turn on the nscd_use_shm boolean. Enabled by default.
81 setsebool -P nscd_use_shm 1
83
87 The SELinux process type pads_t can manage files labeled with the fol‐
88 lowing file types. The paths listed are the default paths for these
89 file types. Note the processes UID still need to have DAC permissions.
90 cluster_conf_t
92 /etc/cluster(/.*)?
94 cluster_var_lib_t
96 /var/lib/pcsd(/.*)?
98 /var/lib/cluster(/.*)?
99 /var/lib/openais(/.*)?
100 /var/lib/pengine(/.*)?
101 /var/lib/corosync(/.*)?
102 /usr/lib/heartbeat(/.*)?
103 /var/lib/heartbeat(/.*)?
104 /var/lib/pacemaker(/.*)?
105 cluster_var_run_t
107 /var/run/crm(/.*)?
109 /var/run/cman_.*
110 /var/run/rsctmp(/.*)?
111 /var/run/aisexec.*
112 /var/run/heartbeat(/.*)?
113 /var/run/pcsd-ruby.socket
114 /var/run/corosync-qnetd(/.*)?
115 /var/run/corosync-qdevice(/.*)?
116 /var/run/corosync.pid
117 /var/run/cpglockd.pid
118 /var/run/rgmanager.pid
119 /var/run/cluster/rgmanager.sk
120 pads_config_t
122 /etc/pads.conf
124 /etc/pads-assets.csv
125 /etc/pads-ether-codes
126 /etc/pads-signature-list
127 pads_var_run_t
129 /var/run/pads.pid
131 prelude_spool_t
133 /var/spool/prelude(/.*)?
135 /var/spool/prelude-manager(/.*)?
136 root_t
138 /sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
140 /
141 /initrd
142
145 SELinux requires files to have an extended attribute to define the file
146 type.
147 You can see the context of a file using the -Z option to ls
149 Policy governs the access confined processes have to these files.
151 SELinux pads policy is very flexible allowing users to setup their pads
152 processes in as secure a method as possible.
153 STANDARD FILE CONTEXT
155 SELinux defines the file context types for the pads, if you wanted to
157 store files with these types in a different paths, you need to execute
158 the semanage command to specify alternate labeling and then use re‐
159 storecon to put the labels on disk.
160 semanage fcontext -a -t pads_exec_t '/srv/pads/content(/.*)?'
162 restorecon -R -v /srv/mypads_content
163 Note: SELinux often uses regular expressions to specify labels that
165 match multiple files.
166 The following file types are defined for pads:
168 pads_config_t
172 - Set files with the pads_config_t type, if you want to treat the files
174 as pads configuration data, usually stored under the /etc directory.
175 Paths:
178 /etc/pads.conf, /etc/pads-assets.csv, /etc/pads-ether-codes,
179 /etc/pads-signature-list
180 pads_exec_t
183 - Set files with the pads_exec_t type, if you want to transition an ex‐
185 ecutable to the pads_t domain.
186 pads_initrc_exec_t
190 - Set files with the pads_initrc_exec_t type, if you want to transition
192 an executable to the pads_initrc_t domain.
193 pads_var_run_t
197 - Set files with the pads_var_run_t type, if you want to store the pads
199 files under the /run or /var/run directory.
200 Note: File context can be temporarily modified with the chcon command.
204 If you want to permanently change the file context you need to use the
205 semanage fcontext command. This will modify the SELinux labeling data‐
206 base. You will need to use restorecon to apply the labels.
207
210 semanage fcontext can also be used to manipulate default file context
211 mappings.
212 semanage permissive can also be used to manipulate whether or not a
214 process type is permissive.
215 semanage module can also be used to enable/disable/install/remove pol‐
217 icy modules.
218 semanage boolean can also be used to manipulate the booleans
220 system-config-selinux is a GUI tool available to customize SELinux pol‐
223 icy settings.
224
227 This manual page was auto-generated using sepolicy manpage .
228
231 selinux(8), pads(8), semanage(8), restorecon(8), chcon(1), sepolicy(8),
232 setsebool(8)
233pads 23-12-15 pads_selinux(8)