1sane-s9036(5)            SANE Scanner Access Now Easy            sane-s9036(5)
2
3
4

NAME

6       sane-s9036 - SANE backend for Siemens 9036 flatbed scanners
7

DESCRIPTION

9       The  sane-s9036  library  implements  a  SANE (Scanner Access Now Easy)
10       backend that provides access to Siemens 9036 flatbed scanners.
11
12

DEVICE NAMES

14       This backend expects device names of the form:
15
16              special
17
18       Where special is the path-name for the special device that  corresponds
19       to  a  SCSI  scanner.  The  special  device name must be a generic SCSI
20       device or a symlink to such a device.   The  program  sane-find-scanner
21       helps  to  find out the correct device. Under Linux, such a device name
22       could be /dev/sga or  /dev/sge,  for  example.   See  sane-scsi(5)  for
23       details.
24
25

FILES

27       /etc/sane.d/s9036.conf
28              The   backend   configuration  file  (see  also  description  of
29              SANE_CONFIG_DIR below).
30
31       /usr/lib*/sane/libsane-s9036.a
32              The static library implementing this backend.
33
34       /usr/lib*/sane/libsane-s9036.so
35              The shared library implementing this backend (present on systems
36              that support dynamic loading).
37

ENVIRONMENT

39       SANE_CONFIG_DIR
40              This environment variable specifies the list of directories that
41              may contain the configuration file.  Under UNIX, the directories
42              are  separated  by a colon (`:'), under OS/2, they are separated
43              by a semi-colon (`;').  If this variable is not set, the config‐
44              uration  file is searched in two default directories: first, the
45              current working directory (".") and then in /etc/sane.d.  If the
46              value  of the environment variable ends with the directory sepa‐
47              rator character, then the default directories are searched after
48              the  explicitly  specified  directories.   For  example, setting
49              SANE_CONFIG_DIR to "/tmp/config:" would  result  in  directories
50              "tmp/config",  ".",  and  "/etc/sane.d"  being searched (in this
51              order).
52
53       SANE_DEBUG_S9036
54              If the library was compiled with  debug  support  enabled,  this
55              environment  variable controls the debug level for this backend.
56              Higher debug levels increase the verbosity of the output.
57
58              Example: export SANE_DEBUG_S9036=4
59
60

SEE ALSO

62       sane(7), sane-scsi(5)
63

AUTHOR

65       Ingo Schneider
66
67
68
69sane-backends 1.0.18              24 Jun 2000                    sane-s9036(5)