sane-sm3840(5)

1sane-sm3840(5)           SANE Scanner Access Now Easy           sane-sm3840(5)
2
3
4

NAME

6       sane-sm3840 - SANE backend for Microtek scanners with SCAN08 USB chip
7

DESCRIPTION

9       The  sane-sm3840  library  implements  a SANE (Scanner Access Now Easy)
10       backend that provides access to some Microtek scanners with the  SCAN08
11       USB chip.
12
13       There  exist  backends  for  Microtek  scanners  with SCSI command set.
14       Refer to sane-microtek(5) and sane-microtek2(5) for details.
15
16       There also exists a Microtek 3600 series driver, see sane-sm3600(5) for
17       details.
18
19       At  present,  the  following scanners are known positively to work with
20       this backend:
21
22              Vendor     Product ID:     Remark:
23              --------   --------------  -----------
24              Microtek   ScanMaker 3840  All modes OK
25              Microtek   ScanMaker 4800  All modes OK
26
27       If you own a Microtek scanner with the SCAN08 chip other than the  ones
28       listed  above,  it may or may not work with SANE.  Feel free to contact
29       the backend author (earle@ziplabel.com) to report results with scanners
30       not on the list.
31
32
33

FRONTEND OPTIONS

35       The following options are supported by the sm3840-driver:
36
37       --mode color|gray
38       Color or grayscale mode.
39
40       --resolution 150|300|600|1200
41       Pixels per inch for scans.
42
43       --depth 8|16
44       Note that the least significant bits of 16bpp mode may be noise.
45
46       --brightness 1..4096
47       Higher numbers increase brightness of returned image.
48
49       --contrast 0.1..9.9
50       Larger numbers decrease contrast of returned image.
51
52       --lamp-timeout 1..15
53       Time in minutes until the lamp is turned off after a scan.
54
55

CONFIGURATION

57       This backend does not support a configuration file right now.
58
59

FILES

61       /usr/lib*/sane/libsane-sm3840.a
62              The static library implementing this backend.
63
64       /usr/lib*/sane/libsane-sm3840.so
65              The shared library implementing this backend (present on systems
66              that support dynamic loading).
67
68
69

ENVIRONMENT

71       SANE_DEBUG_SM3840
72              If the library was compiled with  debug  support  enabled,  this
73              environment  variable controls the debug level for this backend.
74              E.g., a value of 128 requests all debug output  to  be  printed.
75              Smaller levels reduce verbosity. To see error messages on stderr
76              set SANE_DEBUG_SM3840 to 1.
77
78

AUTHOR

84       Earle F. Philhower III (earle@ziplabel.com)
85
86
87
88
89sane-backends 1.0.18             Mar 15, 2005                   sane-sm3840(5)