1srec_cosmac(5) File Formats Manual srec_cosmac(5)
2
3
4
6 srec_cosmac - RCA Cosmac Elf file format
7
9 This file takes the form of one or more RCA Cosmac Elf monitor com‐
10 mands, also known as the IDIOT/4 monitor. Only the change memory com‐
11 mand (!M) is allowed.
12
13 The general form of the !M command takes the form
14 !Maaaa dd ... dd
15 The !M command writes data byte bytes (represented by character pairs
16 dd) into successive memory locations, started at address aaaa. Spaces
17 between data bytes are ignored.
18
19 Using the comma (,) line continuation character resumes from the next
20 address in sequence.
21 !Maaaa dd ... dd, dd ... dd
22
23 Using the semicolon (;) line continuation character takes an address on
24 the next line
25 !Maaaa dd ... dd; aaaa dd ... dd
26
27 It is also possible to have the semicolon immediately after the com‐
28 mand.
29 !M; aaaa dd ... dd
30
31 All of these forms may be used in combination.
32
33 Size Multiplier
34 In general, binary data will expand in size by approximately 2.0 times
35 when represented with this format.
36
38 Here is an example Cosmac file. It contains the data ``Hello, World''
39 to be loaded at address 0x1000.
40 !M1000 48656C6C6F2C20576F726C640A
41
43 srec_cat version 1.35
44 Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
45 2007 Peter Miller
46
47 The srec_cat program comes with ABSOLUTELY NO WARRANTY; for details use
48 the 'srec_cat -VERSion License' command. This is free software and you
49 are welcome to redistribute it under certain conditions; for details
50 use the 'srec_cat -VERSion License' command.
51
53 Peter Miller E-Mail: millerp@canb.auug.org.au
54 /\/\* WWW: http://www.canb.auug.org.au/~millerp/
55
56
57
58Reference Manual SRecord srec_cosmac(5)